Takumi Project Wrinkle [Crystal Paint] Alternator
JPY 96,800
Please contact us for availability.
Takumi Project Wrinkle [Crystal Paint] Alternator
Product name | Wrinkle [Crystal Paint] Alternator |
Rebuilt high output 150A (large capacity) + SC low resistance + crystal paint model | |
Compatible models | ・WRX STI (VAB) [Genuine 110A] / WRX S4 (VAG) [Genuine 150A]
・Levorg (VMG/VM4) [Genuine 150A]
・GRB/GVB/GRF/GVF Impreza [Genuine 110A]
・GDB/GDA Impreza [Genuine 90A]
・GC8 Impreza [Genuine 75A] *Added in May 2023 ・BP5/BL5 Legacy [Genuine 110A] ・SVX Alcyone [Genuine 90A] ・FT86/BRZ (ZN6/ZC6) [Genuine 130A] *Added in April 2023 * For the WRX S4 (VAG), Levorg (VMG/VM4), and 86/BRZ (ZN6/ZC6), they are originally genuine high-output + SC low-resistance models, so the main work will be O/H and crystal paint. |
Features of Wrinkle [Crystal Paint] Alternator
- The low magnetic resistance allows the engine’s output potential to be fully utilized!
- Because of its instantaneous power, the battery charges quickly → Ideal for short rides ♪
- Compared to conventional structures, the SC structure provides stable electricity supply to electrical components.
- Contributes to reducing risk by providing stable voltage when the engine is at full throttle and under maximum load (fuel pump, injectors, electric fan, air conditioner operation, etc.)
- It can minimize voltage drops especially when using air conditioners in the summer.
- The alternators of vehicles that have been used for a long time will eventually wear out, so have them rebuilt to refresh them for insurance purposes!
A high output alternator is not necessarily better.
Simply put, when the alternator has high output, the voltage increases proportionally, which can have a negative effect on electrical components.
Therefore, a high-output alternator and reliable regulator control (Max 14.5V) are required.
Wrinkle Alternators use a domestically produced regulator with a proven track record of reliability.
*This product maximizes the inherent potential of the product, but does not improve output.
*When applying the crystal coating, we take great care to ensure the contact points are secured.
*The negative earth is a very important part, so if it has deteriorated, we recommend replacing it at the same time.