- Genuine Nissan
-
-
Out of stock
- Estimated shipping date of this products, is a dummy date - not the actual date, as it's UNKNOWN!
- UNKNOWN ETA, MANUFACTURE AREN'T TAKING NEW ORDERS ATM.
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Jura Tec
- Carbon Fiber
-
- Genuine HKS
- AN001 is compatible with: - Nissan (CA18, CG10, CG13, CGA3, CR10, CR12, CR14, GA15, GA16, HR12, HR15, HR16, KA24, MA10, MR16, MR18, MR20, QG15, QG18, QR20, QR25, RB20, RB25, RB26, SR18, SR20, VG20, VG30, VH41, VH45, VK45, VQ25, VQ30, VQ35, VQ37, VR38) - Honda (B16, B18, B20, D13, D15, D16, E07, F18, F20, F22, F23, H22, J30, K20, K24, L13, L15, LDA, LEA, LEB, P07, R18, R20, S07, ZC) - Suzuki (K6, K12, M15, M16)
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nissan
- For series-2 BNR34 08/2000-
- Compatible with series-1 BNR34's 01/1999-
- Thread type: M12
-
- Genuine TOMEI
- Chrome Moly Alloy (SCM435)
- Up to 10,000 RPM
- M6 P1.00
- Contents: - Bolt x 28 - Nut x 28
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nismo
- Nissan OEM no.: 65810-83L00
- Qty. per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Works Bell
- Note: Super Hicas
- For None SRS (Airbag) models
- Type: Standard
- Length: 65mm
-
- Made in Japan
- Genuine leather
- Black leather
- Purple stitching
-
- Set of 3 lock bolts, 1 special key, 3 original NISMO logo stickers
- Lock bolt head size: diameter 18mm
- 1 year warranty
-
- Material: Machined aluminum
- Thread size: M33 pitch 3.5mm
- Heat-resistant rubber O-ring included
- First generation NISMO logo included
- Logo plate: Stainless steel sticker type
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- Material: Sulfur free-cutting steel (SUM43L) (machined + hardened) + nickel chrome plating (excluding washer)
- Shape: Tapered seat
- First generation NISMO logo (lug nuts)
- Color: Dark Chrome
- Size: Total length 31.5mm, thread depth 12mm, thread size M12x1.25
- Made by McGuard
- 4 security lock nuts, 16 lug nuts, 1 security lock nut socket, 1 lug nut socket
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- Made from pure titanium
- Weight: 1.4kg
- First generation NISMO logo plate (stainless steel, riveted)
- Accessories: Complete set of mounting accessories
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- First generation NISMO logo included
- Outer diameter φ45
- Valve pressure P = 1.3kg/cm2
- Seal: Heat-resistant silicone rubber
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- First generation NISMO logo included
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- When installing, please use the included cushioning material in areas with little space between the product and surrounding parts.
- Depending on the individual vehicle, installation may require skill, so please contact a specialist store that has the correct knowledge and know-how.
- When installing on the BCNR33, a protective tube or tie wrap may be required to avoid interference with the electric fan. Please purchase separately.
- When installing on a BCNR33, the intercooler upper mount stay needs to be modified.
- 1 Year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- Set of metal catalyst integrated front pipe + center silencer integrated center pipe + main muffler
- Material: Exhaust finisher: titanium alloy, other parts: stainless steel
- Exhaust finisher: DLC coating, riveted, with original NISMO logo
- Pipe diameter: Main φ80, Tail φ110
- Proximity noise level: 89dB
- 1 year warranty
- The NE-1 exhaust system is a semi-dual exhaust system that includes a sports catalyst and meets safety standards, and maximizes the performance of the RB26DETT engine.
- This product features an exhaust finisher (made from high-purity titanium alloy) with a DLC coating to achieve a distinctive, luxurious black color, and also features the first-generation NISMO logo.
-
- Genuine Nismo
- Heritage product
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 90 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 30mm down – Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine TOMEI
-
- Genuine Nissan
-
- Genuine AutoSelect
- Material: Fiberglass (FRP)
-
- Genuine Nissan
-
- Genuine Nissan
- Price is listes as per pcs.
- Required qty pr. car: 2 pcs
-
- Genuine Nismo
- Old Nissan OEM no. 28860-01U00, 28850-01U00
- Kit contents: Pivot holder, washer, C ring, dust seal (pivot arm and bending washer are reused) (This kit replaces NISMO Heritage Parts 28860=RHR20)
- Qty required per car. 1 or 2 kit
-
- Genuine Nismo
- OEM part no. - 68742-01U00 - 68743-01U00 - 68740-01U00 - 68741-01U00
- Delivery starts from mid april 2024
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine: Nismo
- Original Part No: 12303-RHR30
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine Nismo
- Re-produced OEM item by Nismo
- Nissan OEM Part no. 78101-AA436
-
- Genuine Nismo
- Re-produced OEM item by Nismo
- Nissan OEM Part no. 78100-AA436
-
- Genuine HKS
- Material: S304 (Stainless steel)
- Tail outer diameter: 124 mm
- Pipe diameter: 85 mm
- Exhaust noise: 97 dB (STD: 95 dB)
-
- Genuine TOMEI
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine TOMEI
- M32-P3.5
- Diameter: 62mm / Height: 29mm
- Aluminium (A5056)
- Black anodized
- TOMEI logo
- Elegant and beautiful surface finish.
-
- Genuine Works Bell
- Specific for Skyline R32 GT-R (BNR32)
- Can be used for both types of steering connector (7 and 12 o'clock direction)
- For 12 o'clock direction connector with normal RAPFIX II, you need this: Connector 12 RAPFIX II Plug (12,100 yen)
- Boss cover is not included, please purchase seperately (9,680 yen)
-
- Genuine Nissan
- Code: 49725MD
-
- Genuine Nismo
- Lead time: UNKNOWN ETA
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
- Genuine Top Secret
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine TOMEI
- Material: Titanium (Stainless steel)
- Main pipe dia: Φ70×2-Φ80 (Φ60×2-Φ70)
- Pipe thickness: 1 mm (2 mm
- Flange thickness: 8 mm (8 mm)
- Weight: 2.4 kg (5.6 kg) (Weight reduce 3.2 kg)
- (STANDARD PART)
-
- Genuine Nissan
- Code: 27450
-
- Genuine OS Giken
- Exclusively for OS-88
-
- Genuine Nismo
- Nissan OEM no.: 14808-05U10
- Label type: Caution emission control
- BNR32: '93/02~ BCNR33: '95/01~
-
- Genuine TRUST
- Outer color: Black
- Inner color: Blue
- White GReddy logo
- Kit contains: 2 hoses and tridon stainless hose bands
- Genuine replacement type silicon & fiber 3-layer radiator hose upper/lower set.
- Compared to the genuine hose, it is upgraded in terms of pressure resistance, heat resistance, corrosion resistance and durability, and maintains high cooling performance in various environments.
-
- Genuine Nissan
-
- Genuine TOMEI
- SUS316 Full Cast
- Exit diameter: ~66mm
- Volume: 800cc / 900cc
- Pipe thickness: ~2.8mm
- Flange thickness: ~11mm
- Weight: 1.85kg / 2.10kg
-
- Genuine Nismo
- Nissan OEM part no.: 24079-AA300
-
- Genuine Okada Projects
- Type: Plasma Direct (D)
- Contains 6 ignition coilpaks
- Plug'n'Play installation
- For normal boost (under 1.8kg/cm2)
-
- Genuine Nismo
- Set of two pcs (left and right ornament plate)
-
- Genuine Nismo
-
- Genuine Nismo
- Heritage program item
- Nissan OEM part no.: 96015-98U00
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine DIXCEL
- Fits BNR32 Skyline GT-R (only normal GT-R)
-
- Genuine HKS
- Belt size: 4PK910
-
- Genuine Jura Tec
- For late model BNR32
-
- Genuine Jura Tec
- For early model BNR32
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine NAPREC
- Thickness: 3.60mm
