- Genuine LAILE
- Material: Aluminium
- Material thickness: 1.2mm
- Weight: 0.280kg
-
-
- Genuine LAILE
- Material: Aluminium
- Material thickness: 2.0mm
- Weight: 3.3kg
- Bolt On with genuine radiator
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22090
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22120
-
- Genuine Nagisa Auto
- Adjustable range: 95-110mm
- Position: Front
- Set of two pcs.
-
- Genuine Nagisa Auto
- Adjustable range: -10 to -12mm
- Position: Rear
- Set of two pcs.
-
- OE Product
- OEM Quality
- OEM no. 56101-14021
-
- OE Product
- Made in Japan
- OEM Quality parts
- Kit includes: - Timingbelt - Waterpump - Idler tensioner - Timing tensioner
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Okuyama Carbing
- Material: Aluminium
-
- Genuine Okuyama Carbing
- Material: Carbon fiber
-
- Genuine ORC
- System: Push type
- With spring dampers
- Discs: Single
- Disc Outer Diameter: 200mm
- Torque response Nm (kgfm): 340(35)
- Kit includes: - Clutch cover - Clutch disc - Flywheel - Flywheels bolts - Release bearing - Pilot bearing
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine Origin Labo
- Material: FRP (Fiberglass)
- Type 2 version
-
- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
-
- Aftermarket replacement part
- Full set
- Includes installation tool
-
- Aftermarket replacement part
-
- Aftermarket replacement part
-
- Aftermarket Replacement service part
-
- OE replacement parts
- Kit includes: - Oil filter - Air filter - 3x Spark plugs - Alternator belt - Air conditioning belt
- Manufacture could be different in the actual set, but will still be same type of product
-
- Aftermarket Replacement
- Gasket included
- Full set
-
- Genuine Project Mu
- Set for both left and right side
- Oversize brake shoes for handbrake, with upgraded Supra JZA80 rear calipers and rotors.
-
- Genuine Project Mu
- Color: Smoke
- Stainless steel fittings
- Teflon hose
- Set of 4 hoses (front and rear)
-
- Genuine Rasty
- Plug including o-seal, lock and bolt
- Made of aluminium
-
- Genuine Rasty
- Material: Stainless steel
- Pipe: 80mm
- Bolt on
- For offroad use ONLY
- Bolts on to stock elbow, and direct catalyzer replacement.
-
- Part No: 31234-14030
-
- Genuine Revolfe S.A.
- Kit includes: - 3 blue silicone hoses - 6 stainless steel hose bands
-
- Genuine RS-R
- Series: Ti2000 DOWN
- Lowering: – Front: 35~40mm – Rear: 20~25mm
- Spring rate: – Front: 8.33kg/mm – Rear: 4.20kg/mm
- Spring color: Black
- JAN Code: 227880
- Avaliable as seperate front and rear set
-
- Genuine RS-R
- Series: RS-R HD
- Lowering: – Front: 35~30mm – Rear: 30~25mm
- Spring rate: – Front: 7.49kg/mm – Rear: 3.84kg/mm
- Spring color: Black
- Avaliable as seperate front and rear set.
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
-
- Genuine SilkRoad
- Set of 2 pcs. (left and right)
- For rear knuckle lower arm
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine T And E VERTEX
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine Tein
- 16 level damping adjustment
- Full-Length Ride Height Adjustment Feature
- Twin-Tube Structure
- Damping Force Adjustment System
- Complete Kit with Upper Mount
- 1-Full-Car-Kit
-
- Genuine TOMEI
- M42-P4.5
- Diameter: 62mm / Height: 35mm
- Aluminium (A5056)
- Black anodized
- TOMEI logo
- Elegant and beautiful surface finish.
-
- Genuine TOMEI
- Bore: φ87.5
- Thickness: 1.5mm
- Material: Metal
- Structure: Super Grommet
-
- Genuine TOMEI
- Bore: φ87.5
- Thickness: 2.0mm
- Material: Metal
- Structure: Super Grommet
- Compatible with VVTi and Non VVTi
-
- Genuine TOMEI
- Bore: φ87.5
- Thickness: 2.0mm
- Material: Metal
- Structure: Super Grommet
-
- Genuine TOMEI
- Pump size: 255 L/h
- Including all hardware needed for installation
-
- Genuine Top Secret
- Set of left and right
- Material: CFRP (Carbon)
- Set contains side and center generator
-
- Genuine Top Secret
- Set of left and right
- Material: CFRP (Carbon)
-
- Genuine: Top Secret
- Material: CFRP (Carbon)
- Type: G-Force
-
- Genuine Top Secret
- Material: CFRP
-
- Genuine Top Secret
- Set of left and right
- Material: Kevlar
- Set contains side and center generator
-
- Genuine Top Secret
- Full set with 5 mats (2 front and 3 for the rear)
- Leadtime: ~2-3 weeks
-
- Genuine Toyota
- Required qty. per. car: 1 pcs
- Code: 52611
-
- Genuine: Toyota
- Genuine Part No: 48198-50011
- Fits for: JZA80, jZZ30, JZZ31, JZS147
-
- Genuine: Toyota
- Genuine part No: 90170-14012
-
- Genuine Toyota
- Code: 47275
- Required qty. per car: 1 pcs
-
- Genuine Toyota
-
Out of stock
- Genuine Toyota
- Set includes left and right center pillar panel - Comes with 8 pcs clips for installation
- Gloss black color
- Discontinued product! - So only avaliable while in stock.
-
- Genuine Toyota
- Old part no./Replaces: 90467-20005
-
- Genuine Toyota
- Code: 99999
-
- Genuine Toyota
- For JZX100 with manuel gear
-
- Genuine Toyota
- Code: 04111
- Required qty. per car: 1 pcs.
-
- Genuine Toyota
-
- Genuine Toyota
- Code: 90311
- Replaces: 90311-89001, 90311-89003, 90311-89001
-
- Genuine Toyota
- Old part no./Replaces 11214-46010
-
- Genuine Toyota
- Exhaust side
-
- Genuine Toyota
- Intake side
-
- Genuine Toyota
- Code:
- Compatible with various models
-
- Genuine Toyota
-
- Genuine Toyota
- Code: 75314
- Required pr. car: 1 pcs
- Satin silver
-
- Genuine Toyota
- Code: 75471B
- Required pr. car: 1 pcs
- Satin silver
-
- Genuine Toyota
- Required pcs. per caliper: 2 pcs. Required pcs. per car: 4 pcs.
