- Genuine JURAN
- Right side (Driver Side)
- Type: T099
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
-
- LEAD TIME: 2-3 months from ordering
- Genuine Kazama Auto
- Made of FRP (Fiberglass reinforcement plastic)
- GT-R racing look front grill
- Including mesh
-
- Genuine Kazama Auto
- Type: Promode
- Material: FRP Fiberglass
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine KOYORAD
- Aluminium condenser
- Core size: 670 × 370 × 16
- OEM No. 88460-22560
-
- Genuine KOYORAD
- With RED lable
- Valve opening pressure: 127kPa/1.3Kg
- Stainless steel with chrome plated finish
-
- Genuine KOYORAD
- Material: Copper
- Thickness: 3-Layer
-
- Genuine KOYORAD
- Type: Type R
- Material: Copper
- Core layer: 3
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KTS
- Material: Steel
- Type: Pillow Ball
- Set of left and right side
- Adjustable
-
- Genuine LAILE
- Material: Aluminium
- Material thickness: 1.2mm
- Weight: 0.280kg
-
- Genuine LAILE
- Material: Aluminium
- Material thickness: 2.0mm
- Weight: 3.3kg
- Bolt On with genuine radiator
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22090
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22120
-
- Genuine Nagisa Auto
- Adjustable range: 95-110mm
- Position: Front
- Set of two pcs.
-
- Genuine Nagisa Auto
- Adjustable range: -10 to -12mm
- Position: Rear
- Set of two pcs.
-
- OE Product
- Made in Japan
- OEM Quality parts
- Kit includes: - Timingbelt - Waterpump - Idler tensioner - Timing tensioner
-
- OE Parts
- Timingbelt
- Tensioner
- Waterpump
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
Compatible models: Toyota GR Supra Applicable model: DB42/DB02 Year : 2019-2025 ■ Height adjustment range Standard vehicle height (adjustment range +/-) Front -15mm (+15/-5mm) Rear -15mm (-/-mm) ■ Spring rate Front 9Kgf/mm Rear 16Kgf/mm ■ Type HAL/DFV ■ Remarks This kit is a complete kit. The image is a product image. If you need a cancellation kit (35020-30), please contact us. * This product is ordered from the manufacturer. If the manufacturer has stock, it can be prepared in a few days. However, if the manufacturer is out of stock or some made-to-order products are made to order, it may take some time to prepare the product. * Product delivery dates are constantly changing. If you need it urgently, please check the delivery date before placing your order. When you place an order , we will check the information of your car, such as the year and model, on the vehicle inspection certificate, etc., as there may be cases where it can be installed. *The vehicle height adjustment range is an estimate. Errors may occur due to the grade of the vehicle being installed, equipment, and changes in parts over time. *The photos shown are product images. Actual product may differ depending on size and specifications. *Regarding vehicle inspection compliance: Please use the product at your own risk and make sure you understand the safety standards of the Road Transport Act before using it. -
Compatible models: TOYOTA GR86 / SUBARU BRZ Applicable model: ZN8 / ZD8 Year : 2022- Product type: HAL / DFV Upper mount: Front Pillow ball, camber adjustable Rear Rubber mount, camber fixed ■ Standard lowering amount (height adjustment range): Front -15mm (-30 to +5mm) Rear -15mm (-30 to +5mm) ■ Free length / spring rate: Front 180mm / 9K Rear 180mm / 7K -
Compatible models: TOYOTA GT86 / SUBARU BRZ Applicable model: ZN6 / ZC6 Year : 2012-2020 Product type: HAL / DFV Upper mount: Front Pillow ball, camber adjustable Rear Rubber mount, camber fixed ■ Standard lowering amount (height adjustment range): Front -15mm (-30 to +5mm) Rear -15mm (-30 to +5mm) ■ Free length / spring rate: Front 180mm / 9K Rear 180mm / 7K
-
- Genuine Okuyama Carbing
- Material: Aluminium
-
- Genuine Okuyama Carbing
- Material: Carbon fiber
-
- Genuine ORC
- System: Push type
- With spring dampers
- Discs: Single
- Disc Outer Diameter: 200mm
- Torque response Nm (kgfm): 340(35)
- Kit includes: - Clutch cover - Clutch disc - Flywheel - Flywheels bolts - Release bearing - Pilot bearing
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine Origin Labo
- Material: FRP (Fiberglass)
- Type 2 version
-
- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
-
- Genuine PIT WORK
- Replacement part
- Gasket included
- Full set
-
- Aftermarket replacement part
- Full set
- Includes installation tool
-
- OE replacement parts
- Kit includes: - Oil filter - Air filter - 3x Spark plugs - Alternator belt - Air conditioning belt
- Manufacture could be different in the actual set, but will still be same type of product
-
- Genuine Project Mu
- Set for both left and right side
- Oversize brake shoes for handbrake, with upgraded Supra JZA80 rear calipers and rotors.
-
- Genuine Project Mu
- Color: Smoke
- Stainless steel fittings
- Teflon hose
- Set of 4 hoses (front and rear)
-
- Genuine Rasty
- Plug including o-seal, lock and bolt
- Made of aluminium
-
- Genuine Rasty
- Material: Stainless steel
- Pipe: 80mm
- Bolt on
- For offroad use ONLY
- Bolts on to stock elbow, and direct catalyzer replacement.
-
- Genuine Revolfe S.A.
- Kit includes: - 3 blue silicone hoses - 6 stainless steel hose bands
-
- Genuine RS-R
- Series: Ti2000 DOWN
- Lowering: – Front: 35~40mm – Rear: 20~25mm
- Spring rate: – Front: 8.33kg/mm – Rear: 4.20kg/mm
- Spring color: Black
- JAN Code: 227880
- Avaliable as seperate front and rear set
-
- Genuine RS-R
- Series: RS-R HD
- Lowering: – Front: 35~30mm – Rear: 30~25mm
- Spring rate: – Front: 7.49kg/mm – Rear: 3.84kg/mm
- Spring color: Black
- Avaliable as seperate front and rear set.
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
