-
Manufacturer name: OHLINS Product name: Screw-type height adjustment model complete kit Car manufacturer: Honda Model: Civic Type R Model: FK8 Year : 2017~2021 Drive: FF Compatibility details: Specifications: Sub-valve: DFV equipped model Free length [F|R] (mm): 180|180 Rate [F|R] (N/mm): 60|100 Down amount [F|R]: 15|25 Cancellation kit: 35020-25 Remarks: Caution: Spring rate cannot be changed at the time of purchase. The standard down amount is data measured during testing by the manufacturer and is only a guide (it may change due to individual vehicle differences, etc.) -
Manufacturer name: OHLINS Product name: Screw-type height adjustment model complete kit Car manufacturer: Honda Model: Civic Type R Model: FL5 Year : 2023~ Drive: FF Compatibility details: Specifications: Sub-valve: DFV equipped model Free length [F|R] (mm): 180|180 Rate [F|R] (N/mm): 60|100 Down amount [F|R]: 15|25 Cancellation kit: 35020-25 Remarks: Caution: Spring rate cannot be changed at the time of purchase. The standard down amount is data measured during testing by the manufacturer and is only a guide (it may change due to individual vehicle differences, etc.)
-
Compatible models: Toyota GR Supra Applicable model: DB42/DB02 Year : 2019-2025 ■ Height adjustment range Standard vehicle height (adjustment range +/-) Front -15mm (+15/-5mm) Rear -15mm (-/-mm) ■ Spring rate Front 9Kgf/mm Rear 16Kgf/mm ■ Type HAL/DFV ■ Remarks This kit is a complete kit. The image is a product image. If you need a cancellation kit (35020-30), please contact us. * This product is ordered from the manufacturer. If the manufacturer has stock, it can be prepared in a few days. However, if the manufacturer is out of stock or some made-to-order products are made to order, it may take some time to prepare the product. * Product delivery dates are constantly changing. If you need it urgently, please check the delivery date before placing your order. When you place an order , we will check the information of your car, such as the year and model, on the vehicle inspection certificate, etc., as there may be cases where it can be installed. *The vehicle height adjustment range is an estimate. Errors may occur due to the grade of the vehicle being installed, equipment, and changes in parts over time. *The photos shown are product images. Actual product may differ depending on size and specifications. *Regarding vehicle inspection compliance: Please use the product at your own risk and make sure you understand the safety standards of the Road Transport Act before using it.
-
Compatible models: TOYOTA GT86 / SUBARU BRZ Applicable model: ZN6 / ZC6 Year : 2012-2020 Product type: HAL / DFV Upper mount: Front Pillow ball, camber adjustable Rear Rubber mount, camber fixed ■ Standard lowering amount (height adjustment range): Front -15mm (-30 to +5mm) Rear -15mm (-30 to +5mm) ■ Free length / spring rate: Front 180mm / 9K Rear 180mm / 7K -
Compatible models: TOYOTA GR86 / SUBARU BRZ Applicable model: ZN8 / ZD8 Year : 2022- Product type: HAL / DFV Upper mount: Front Pillow ball, camber adjustable Rear Rubber mount, camber fixed ■ Standard lowering amount (height adjustment range): Front -15mm (-30 to +5mm) Rear -15mm (-30 to +5mm) ■ Free length / spring rate: Front 180mm / 9K Rear 180mm / 7K
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 90 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 30mm down – Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
