Skip to content
-
- Genuine Nismo
- Old Nissan OEM no. 28860-01U00, 28850-01U00
- Kit contents: Pivot holder, washer, C ring, dust seal
(pivot arm and bending washer are reused)
(This kit replaces NISMO Heritage Parts 28860=RHR20)
- Qty required per car. 1 or 2 kit
-
-
- Genuine PITWORK / Nissan
- Code: 13070M
- Required qty. per car: 1 pcs
-
- Genuine Honda
- Set of two visors (left and right)
-
- Genuine Works Bell
- Note: Super Hicas
- For None SRS (Airbag) models
- Type: Standard
- Length: 65mm
-
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Honda Genuine Part Number: 51350-SJ7-003
-
- Honda Genuine Part Number: 51360-SJ7-003
-
- Genuine Nismo
- Rear mount (Transmission)
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Cap
- Often lead time is about ~8 weeks from ordering
-
- Full Carbon
- Made in Japan
- High Quality
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of B Pillar Seatbelt Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine DIXCEL
- PD Type
- Set of 2 pcs.
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine TRUST
- Outer color: Black
- Inner color: Blue
- White GReddy logo
- Kit contains: 2 hoses and tridon stainless hose bands
- Genuine replacement type silicon & fiber 3-layer radiator hose upper/lower set.
- Compared to the genuine hose, it is upgraded in terms of pressure resistance, heat resistance, corrosion resistance and durability, and maintains high cooling performance in various environments.
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Switch Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine DIXCEL
- Set of two discs (left and right)
-
- OEM Quality
- OEM part no. 22020-50F00
-
- Genuine Gasket Tech
- Compatible with: Today, Acty VAN, Acty Truck, Street, etc.
- Engine model: E05A 550cc 3-cylinder engine
- Metal gasket Bore diameter φ63.5 (various bore)
- Thickness: Standard specification 1.08mm/1.0mm (genuine 1.05mm)
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
-
-
-
-
- Genuine Nissan
- Blank master key
- GT-R Logo
- Til R33 og R32 GT-R
-
- Genuine Nismo
- Nissan part no. 26124-05U00
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Muse Concept Design
- Made of ABS (Textured)
- Top Mounting Cover and Sensor Cover
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine Jura Tec
- For early model BNR32
-
- Genuine Works Bell
- Specific for Skyline R32 GT-R (BNR32)
- Can be used for both types of steering connector (7 and 12 o'clock direction)
- For 12 o'clock direction connector with normal RAPFIX II, you need this: Connector 12 RAPFIX II Plug (12,100 yen)
- Boss cover is not included, please purchase seperately (9,680 yen)
-
-
- Genuine Nissan
- Set of two visors (left and right)
-
- Genuine Beat-Sonic
- Type: SLA-70
- For vehicles with Toyota Super Live Sound
- Not compatible with vehicles with Electro Multi-Vision (EMV).
- For genuine connector with 15 or 14Pin (Single connector)
- For replacement of genuine headunit/system to aftermarket 1DIN or 2DIN
-
-
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
-
- OE Products
- Made in Japan
- Complete timingbelt replacement set
- Timingbelt
- Waterpump
- Idler + tensioner
-
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
-
- Genuine Muse Concept Design
- Made of ABS
- Dashboard Defrost Vents Left and Right
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right vent
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54476-RS590
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster lower cover trim
- Often lead time is about ~8 weeks from ordering
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
- Replaces genuine part no.: 31200-PN3-003
- OE Rebuild product
-
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
-
- Genuine Muse Concept Design
- Made of ABS
- 2 Pieces that clicks into one
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster cover panel
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 89MM Test Pipe
- Weight 600g
- Simple solution to eliminate exhaust restriction in GT-R exhaust systems
- Often lead time is about ~8 weeks from ordering
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Abflug
- Material: Fiberglass
-
- Genuine Nismo
- Nissan OEM part no.: 12303-05U01
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55045-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54535-RS520
-
- Genuine Garage Mak
- Fiberglass (FRP)
- Width: 1016 mm
-
- Genuine Spirit Rei
- Material: Carbon
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material 3K Dry Carbon Fiber
- RAW Dry Carbon requires top clear coating or painting
- Weight 20g
- Often lead time is about ~8 weeks from ordering
- Compatibility, OEM Aluminum Bonnets for BNR32, BCNR33, BNR34 (cutting & inlay required, template included)
-
- Genuine Abflug
- Material: Fiberglass
-
- Genuine NAPREC
- Head diameter:
- IN: φ36 (+1.5)
- EX: φ31.5 (+1.5)
- Stem diameter:
- IN: φ6
- EX φ6 (No Sodium)
- Stem length:
- IN: STD
- EX: STD
- Weight:
IN: 49.3 (-0.5g)
EX: 42g (+-0)
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine BN Sports
- Material: FRP Fiberglass
- Set of right and left sideskirt
-
- OE Quality
- OEM No. G2712-05U01 / 72712-05U01
- With bronze tone
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nismo
- Heritage product
-
- Genuine Abflug
- Material: Fiberglass
- Set of right and left
-
- Genuine Nismo
- OEM part no.
- 68742-01U00
- 68743-01U00
- 68740-01U00
- 68741-01U00
- Delivery starts from mid april 2024
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Jura Tec
- Kit contains:
- Caliper brackts (LH+RH)
- Bolts and hardware for installation
- Special made genuine drum shoe set (LH+RH) to fit R35 GT-R brake drum bell
**All shown in the photo
-
- Genuine Muse Concept Design
- Made of ABS plastic
- Reducing wight and increase structual rigidity for preventing the surface to make cracks in the pait over time.
- Comes as a pair of left and right rear spat
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Weight 135g per side
- Comes as a pair of left and right brake duct
- Reducing weight and increase structural strength
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Fujitsubo
- Pipe diameter: 60.5
- Outlet shape: φ90 slash (12°･RL)
- Weight: 17.6
- Volume idling: 67dB (68dB)
- Prox exhaust noise at 5.250rpm: 95dB (97dB)
- 3000rpm: 83dB (84dB)
- 5000rpm: 95dB (96dB)
- 4000~6000rpm: 103dB (101dB)
-
- Genuine TOMEI
- SUS316 Full Cast
- Exit diameter: ~66mm
- Volume: 800cc / 900cc
- Pipe thickness: ~2.8mm
- Flange thickness: ~11mm
- Weight: 1.85kg / 2.10kg
Page load link
