- Genuine Honda
- No# 5
-
-
- Genuine Toyota
- Code: 11101E
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Works Bell
- Note: Super Hicas
- For None SRS (Airbag) models
- Type: Standard
- Length: 65mm
-
- Genuine Honda
-
- Genuine Honda
- Inner moulding
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine Nismo
- Heritage product
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- DISCONTINUED ITEM - ONLY AVALIABLE AS LONG AS WE HAVE STOCK!
- Genuine TRD
- Includeing gasket
- Brand new unused item (old stock)
-
- OEM Quality
- OEM part no. 22020-50F00
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine Toyota
- Code: 31231B
-
- Genuine TOMEI
-
- Genuine Honda
- Set of two visors (left and right)
-
- Genuine Honda
-
- Genuine Nissan
- Code:
-
- Genuine Nismo
- Old Nissan OEM no. 28860-01U00, 28850-01U00
- Kit contents: Pivot holder, washer, C ring, dust seal (pivot arm and bending washer are reused) (This kit replaces NISMO Heritage Parts 28860=RHR20)
- Qty required per car. 1 or 2 kit
-
- Genuine Nismo
- OEM part no. - 68742-01U00 - 68743-01U00 - 68740-01U00 - 68741-01U00
- Delivery starts from mid april 2024
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
- Genuine Honda
- M8 x 95 mm
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Maruichi Rubber Ind.
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 44333-SJ6-300
-
- Seiken
- Fits: Rear Right & Left inner.
- Includes 1 pcs.
- Genuine no. 44333-ST5-J01
-
- Honda Oem
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42335-SJ6-013
-
- Maruichi Rubber Ind.
- Fits: Front Right & Left inner .
- Includes 1 pcs.
- Genuine no. 44315-SD5-013
-
- Seiken
- Fits: Front Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42018-SR7-J21
-
- Sankei 555
- Fits: Right & Left
- Includes 1 pcs.
- Genuine no. 53540-SJ6-003
-
- Honda Genuine Part Number: 51360-SJ7-003
-
- Honda Genuine Part Number: 51350-SJ7-003
-
- Genuine Garage Mak
- Fiberglass (FRP)
- Width: 1016 mm
-
- Genuine T & E Vertex
- Kit contains: - Front bumper - Sideskirts - Rear bumper
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Honda
- Required per car: 4 pcs.
-
Out of stock
- Genuine Honda
- Required per car: 4 pcs.
- 8X94
-
- Genuine Honda
- Required per car: 4 pcs.
- 12 POINT 8X23.5
-
- Genuine DIXCEL
- Set of two discs (left and right)
-
- Genuine Works Bell
- Specific for Skyline R32 GT-R (BNR32)
- Can be used for both types of steering connector (7 and 12 o'clock direction)
- For 12 o'clock direction connector with normal RAPFIX II, you need this: Connector 12 RAPFIX II Plug (12,100 yen)
- Boss cover is not included, please purchase seperately (9,680 yen)
-
-
- Genuine Honda
-
-
- Genuine Miyaco Motors
