- Genuine Nismo
- Left mount
-
Out of stock
- Estimated shipping date of this products, is a dummy date - not the actual date, as it's UNKNOWN!
- UNKNOWN ETA, MANUFACTURE AREN'T TAKING NEW ORDERS ATM.
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!