- Genuine Toyota
- Intake side
-
Out of stock
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment: - Front: 30 steps - Rear: 30 steps
- Spring rate: - Front: 22.0 kgf/mm (216 N/mm) - Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate: - Front: 19.8 kgf/mm - Rear: 19.8 kgf/mm
- Free length: - Front: 170mm - Rear: 200mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine Fujitsubo
- Outlet pipe diameter: 117mm (8°)
- Main pipe diameter: 76.3mm
- Maximum output: 222.4kw(302.5ps)/5670rpm
- Maximum torque: 399.8N・m(40.8kg・m)/4590rpm
- Muffler weight: 12.5kg (19.2kg)
- Exhaust noise (4200rpm): 90dB (87dB)
- *(Factory specifications)
- Made to order, lead time about ~1,5-2,5 month
-
- Genuine DENJI
- Driving type: RHD
- Housing: Chrome
- Lens color: Blue/Clear
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Chrome
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: Blue/Clear
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Black
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: Clear/blue lens
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13