- Genuine Aero Palace
- Made of fiberglass (FRP)
-
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BCNR33 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine Beat-Sonic
- Type: SLA-70
- For vehicles with Toyota Super Live Sound
- Not compatible with vehicles with Electro Multi-Vision (EMV).
- For genuine connector with 15 or 14Pin (Single connector)
- For replacement of genuine headunit/system to aftermarket 1DIN or 2DIN
-
Out of stock
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: – OEM: 87 – NÜR SPEC-R: 94
-
- Genuine BN Sports
- Material: FRP Fiberglass
-
- Genuine BN Sports
- Material: FRP Fiberglass
- Set of right and left sideskirt
-
- Genuine BOMEX
- Fog and indicator -lights is not included.
-
- Genuine BOMEX
-
- Genuine BOMEX
-
- Genuine BOMEX
- Set for left and right side
-
- Genuine BOMEX
- Set of left and right sideskirt
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 30mm (std. 26.5mm)
- Ratio: 160%
- Color: Blue
- Position: Front
- Including bushes
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 21mm
- Ratio: 131%
- Color: Blue
- Position: Rear
- Including bushes
-
- Genuine D-Max
- Set of left and right fender
- 30mm wider than stock fenders
- Made of FRP (Fiberglass)
- Lead time: ~1,5 month
- Fitment and quality from this manufacture is for drift/race, so please expect that modifications are required.
-
- Genuien D-Max
- Type: D1Spec
- Material: Carbon
-
- Genuine D-Max
- Smoked lens
- Chrome housing
- Set contains: Right + Left lamp and center garnish panel (3 pieces)
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: Clear/blue lens
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Black
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: Blue/Clear
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Chrome
- Lens color: Blue/Clear
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Chrome
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
- Genuine Do-Luck
- Adjustable cross bar
- Plated steel
-
- Genuine Fujitsubo
- Type: Legalis R
- Material: Stainless steel
- Pipe diameter: 60.5
- Tailtip style: 90mm
- dB specification: 90db (4800 rpm) - STD: 84 dB (4800 rpm)
- Weight: ~14.1kg
-
- Genuine Fujitsubo
- Pipe diameter: 60.5
- Outlet shape: φ90 slash (12°･RL)
- Weight: 17.6
- Volume idling: 67dB (68dB)
- Prox exhaust noise at 5.250rpm: 95dB (97dB)
- 3000rpm: 83dB (84dB)
- 5000rpm: 95dB (96dB)
- 4000~6000rpm: 103dB (101dB)
-
- Genuine Fujitsubo
- Outlet pipe diameter: 117mm (8°)
- Main pipe diameter: 76.3mm
- Maximum output: 222.4kw(302.5ps)/5670rpm
- Maximum torque: 399.8N･m(40.8kg･m)/4590rpm
- Muffler weight: 12.5kg (19.2kg)
- Exhaust noise (4200rpm): 90dB (87dB)
- *(Factory specifications)
- Made to order, lead time about ~1,5-2,5 month
-
- Genuine Fujitsubo
- Pipe diameter: 42.7φ-50.8φ-70.0φ
- Maximum output: 134.4kw(182.8ps)/6520rpm
- Volume idling: 67dB
- Proximity exhaust noise (4800rpm): 88.dB
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Mak
- Fiberglass (FRP)
- Width: 1016 mm
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Only avaliable as long as we have stock!
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
Out of stock
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment: - Front: 30 steps - Rear: 30 steps
- Spring rate: - Front: 22.0 kgf/mm (216 N/mm) - Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate: - Front: 19.8 kgf/mm - Rear: 19.8 kgf/mm
- Free length: - Front: 170mm - Rear: 200mm
-
- Genuine HKS
- Location: Left side, behind bumper
- Core size: 200 x 220 x 48 (15 Row)
- Hose size: #10
- Adapter Thermo: M12×P1.25 (1 hole), PT1/8 (1 hole)
- - Thermostat valve operation start temperature 70°C (±3°C) - Thermostat valve fully closed temperature 80°C (±3°C)
- Includes oil filter relocation
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Genuine HKS
- Material: S304 (Stainless steel)
- Tail outer diameter: 124 mm
- Pipe diameter: 85 mm
- Exhaust noise: 97 dB (STD: 95 dB)
-
- Genuine Honda
- Required qty. per car: 1 pcs.
-
- Genuine Honda
-
- Genuine KOYO
- Toyota OEM no. 90369-49002
-
- Genuine KOYORAD
- Genuine replacement
-
- Genuine KOYORAD
- Material: Copper
- Thickness: 3-Layer
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine Miyaco Motors
-
- Genuine NAPREC
- Head diameter: - IN: φ36 (+1.5) - EX: φ31.5 (+1.5)
- Stem diameter: - IN: φ6 - EX φ6 (No Sodium)
- Stem length: - IN: STD - EX: STD
- Weight: IN: 49.3 (-0.5g) EX: 42g (+-0)
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine Nismo
- Left mount
-
- Genuine Nismo
- Rear mount (Transmission)
-
- Genuine Nismo
- Right side
-
- Genuine Nismo
-
- Genuine Nismo
- Nissan OEM no.: 14808-05U10
- Label type: Caution emission control
- BNR32: '93/02~ BCNR33: '95/01~
-
Out of stock
- Estimated shipping date of this products, is a dummy date - not the actual date, as it's UNKNOWN!
- UNKNOWN ETA, MANUFACTURE AREN'T TAKING NEW ORDERS ATM.
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Nismo
- Heritage product
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nismo
- Set of two pcs (left and right ornament plate)
-
- Genuine Nismo
- Material: FRP
- Comes as a pair (left and right side)
- Including all hardware needed for installation
- Avaliable for seperate purchase, if you only need left of right sideskirt
-
- Genuine Nismo
-
- Genuine Nissan
-
- Genuine Nissan
-
Genuine Nissan
-
- Genuine Nissan
- Blank master key
- GT-R Logo
- Til R33 og R32 GT-R
-
Genuine Nissan
-
- Genuine Nissan
- Required qty. per car: 8 pcs.
-
- Genuine Nissan
-
- Genuine Nissan
- Code: 40202
- Compatible for Right and Left side
-
- Genuine Nissan
-
- Genuine Nissan
-
- Genuine Nissan
- Code: 49725MD
-
- Genuine Nissan
- Part Code: 44217A
- Required qty. per car: 2 pcs
- Price is listed per clip
-
- Genuine Nissan
- Code: 92425
- Required qty. per car: 1 pcs
