- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine Toyota
- Code: 75533
- Required qty. pr. car. 1 pcs
-
Out of stock
- Genuine Nismo
- Aluminium
- Complete kit with installation hardware
- Better and quicker response
-
- Genuine Toyota
- Color code: 057
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Toyota
- Original number: 81570-22130-C0
- For cars without rear wiper
- For cars with out rear spoiler
- Trim color: BLACK, TRIM2#
-
- Genuine TOMEI
- Material: Titanium
- Main pipe diameter: Φ80.0
- Main pipe thickness: 1mm
- Silencer diameter: Φ152
- Silencer thickness: 1mm
- Sub silencer diameter: Φ120
- Exit diameter: Φ115
- Exit thickness: 1mm
- Flange thickness: 8.0mm
- Weight: 6.0kg (STD: 16.0kg)
- NOTES: For off road use only!
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine Toyota
- Price is pr. set
- Required pr. car: 1 set (1 set contains repair seals for right and left rear brake caliper)
-
- Genuine Toyota
- Price is pr. set
- Required pr. car: 1 set (1 set contains repair seals for right and left rear brake caliper)
-
- Genuine Toyota
- Price is pr. piece
- Required pr. car: 2 pcs. (1 piston per caliper)
-
- Genuine Toyota
- Price is pr. piece
- Required pr. car: 4 pcs. (2 piston per caliper)
-
- Genuine Nissan
- Discontinued
- Replacement for this part can be found here Nissan Front Hub Seal
-
- Genuine BLITZ
- Lightweight all-aluminum radiator realizing low price of threat by adopting new core and reviewing manufacturing method.
- A 42 mm thick core and a large capacity tank realize substantial heat capacity increase.
- Design that can install genuine electric fan and fan shroud. (Depending on the model, processing may be necessary for mounting).
- Buff finish on tank, quality is a commitment at a low price.
- Convenient to take out the water temperature sensor, with 1 / 8PT service hall.
- Adopting a new type of outer fin to enhance heat dissipation.
- Designed exclusively for each type of vehicle, adopting different tube pitches depending on the model.
- Alumite finished drain bolt and BLITZ original radiator cap are standard equipment.
-
- Genuine Toyota Rebuild
- Genuine no.# 28100-46140
- Return core is not required
-
- Genuine SARD
- Fitting: 8mm
- Color: Gold
- REMARK: Cannot be used with genuine injectors.
-
- Genuine Jura Tec
- Kit contains: - Caliper brackts (LH+RH) - Bolts and hardware for installation - Special made genuine drum shoe set (LH+RH) to fit R35 GT-R brake drum bell **All shown in the photo
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
