- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 90 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 30mm down – Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- OE Parts
- Timingbelt
- Tensioner
- Waterpump
-
OE replacement spare parts, OE quality made in Japan. This is a complete timingbelt replacement set. The set includes:
- Timingbelt
- Waterpump
- Idler
- Tensioner
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left rear brake caliper
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left front brake caliper
-
- Genuine Nissan
- Code: 27441
- Required qty. per car: 2 pcs.
- Replaces OLD part no.: 28931-80F00, B8930-50Y00
-
- Genuine Nissan
- Required qty. per car: 2 pcs
-
- Genuine Nissan
- Price is listes as per pcs.
- Required qty pr. car: 2 pcs
-
- Genuine Nissan
- Code: 92425
- Required qty. per car: 1 pcs
-
- Genuine Nissan
- 180SX Type X Rear Center Lamp Assembly
-
- Genuine Nissan
- Part Code: 44217A
- Required qty. per car: 2 pcs
- Price is listed per clip
-
- Genuine Nissan
- Code: 49725MD
-
- Genuine Nissan
- Code: 40202
- Compatible for Right and Left side
-
- Genuine Nissan
- Discontinued
- Replacement for this part can be found here Nissan Front Hub Seal
-
- Genuine Nissan
- OEM Carbon Fiber Rear Center Finisher Backdoor
- RPS13
-
- Genuine Nissan
- 180SX Type X Tail Lamp Assembly RH
-
- Genuine Nissan
- 180SX Type X Tail Lamp Assembly LH
-
- Genuine Nissan
- Blank master key
- GT-R Logo
- Til R33 og R32 GT-R
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Material: FRP
- Comes as a pair (left and right side)
- Including all hardware needed for installation
- Avaliable for seperate purchase, if you only need left of right sideskirt
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
Out of stock
- Genuine Nismo
- Set of two pcs (left and right ornament plate)
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55045-RS580
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Nismo
- Nissan OEM no.: 14808-05U10
- Label type: Caution emission control
- BNR32: '93/02~ BCNR33: '95/01~
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54535-RS520
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54476-RS590
-
- Genuine Nismo
- Rear mount (Transmission)
-
Out of stock
- Genuine Nismo
- Aluminium
- Complete kit with installation hardware
- Better and quicker response
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine NAPREC
- Head diameter: - IN: φ36 (+1.5) - EX: φ31.5 (+1.5)
- Stem diameter: - IN: φ6 - EX φ6 (No Sodium)
- Stem length: - IN: STD - EX: STD
- Weight: IN: 49.3 (-0.5g) EX: 42g (+-0)
-
- Genuine Nagisa Auto
- Adjustable range: -10 to -12mm
- Position: Rear
- Set of two pcs.
-
- Genuine Nagisa Auto
- Adjustable range: 95-110mm
- Position: Front
- Set of two pcs.
-
- Genuine Muse Concept Design
- Material Titanium
- 89MM Test Pipe
- Weight 600g
- Simple solution to eliminate exhaust restriction in GT-R exhaust systems
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- Titanium Front Y Pipe
- Pipe Size φ70 x2 -φ89
- Even Length Type
- Weight 2.7KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- High Performance 89MM High Flow Catalytic Converter
- Weight 1.3KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.6KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- RAW Dry Carbon requires top clear coating or painting
- Original Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Plug-and-play installation, no wiring modifications required, connects directly to the factory cigarette lighter harness
- 1 Type C and 1 USB Charger outputs
- Can be directly inserted into the factory expansion slot of R33 and R34 models
- For installation in the Center Armrest of R32, R33, or R34, a cutout is required, a cutout template is included for easy installation
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material 3K Dry Carbon Fiber
- RAW Dry Carbon requires top clear coating or painting
- Weight 20g
- Often lead time is about ~8 weeks from ordering
- Compatibility, OEM Aluminum Bonnets for BNR32, BCNR33, BNR34 (cutting & inlay required, template included)
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22120
