Skip to content
-
- Genuine Aero Palace
- Made of fiberglass (FRP)
-
- Genuine Apexi
- Set indluding hand controller (FC Commander)
- Automatic transmission
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BCNR33 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine Beat-Sonic
- Type: SLA-70
- For vehicles with Toyota Super Live Sound
- Not compatible with vehicles with Electro Multi-Vision (EMV).
- For genuine connector with 15 or 14Pin (Single connector)
- For replacement of genuine headunit/system to aftermarket 1DIN or 2DIN
-
-
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level:
- OEM: 86
- NÜR SPEC-R: 99
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level:
– OEM: 87
– NÜR SPEC-R: 94
-
- Genuine BLITZ
- Filter colors avaliable: Blue and red
-
- Genuine BN Sports
- Material: FRP Fiberglass
-
- Genuine BN Sports
- Material: FRP Fiberglass
- Set of right and left sideskirt
-
- Leadtime: ~3 month from ordering
- Genuine BN Sports
- Kit contains:
- Front bumper
- Sideskirts
- Rear bumper
- Material: FRP Fiberglass
-
- Genuine BOMEX
- Fog and indicator -lights is not included.
-
-
-
- Genuine BOMEX
- Set for left and right side
-
- Genuine BOMEX
- Set of left and right sideskirt
-
- Genuine BRIDE
- Type: MO
- Passenger side (Left hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
- Genuine BRIDE
- Type: MO
- Drivers side (Right hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Clear crystal glass
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Smoked crystal clear glass
-
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 30mm (std. 26.5mm)
- Ratio: 160%
- Color: Blue
- Position: Front
- Including bushes
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 21mm
- Ratio: 131%
- Color: Blue
- Position: Rear
- Including bushes
-
- Genuine D-Max
- Set of left and right fender
- 30mm wider than stock fenders
- Made of FRP (Fiberglass)
- Lead time: ~1,5 month
- Fitment and quality from this manufacture is for drift/race, so please expect that modifications are required.
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuien D-Max
- Type: D1Spec
- Material: Carbon
-
- Genuine D-Max
- Smoked lens
- Chrome housing
- Set contains: Right + Left lamp and center garnish panel (3 pieces)
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
- Genuine Do-Luck
- Adjustable cross bar
- Plated steel
-
- Genuine FINAL Konnexion
- 20mm wider than stock fenders
- Set of left and right side
-
- Genuine FINAL Konnexion
- 50mm wider than stock fenders
- Set of left and right side
-
- Genuine Fujitsubo
- Type: Legalis R
- Material: Stainless steel
- Pipe diameter: 60.5
- Tailtip style: 90mm
- dB specification: 90db (4800 rpm)
- STD: 84 dB (4800 rpm)
- Weight: ~14.1kg
-
- Genuine Fujitsubo
- Pipe diameter: 60.5
- Outlet shape: φ90 slash (12°･RL)
- Weight: 17.6
- Volume idling: 67dB (68dB)
- Prox exhaust noise at 5.250rpm: 95dB (97dB)
- 3000rpm: 83dB (84dB)
- 5000rpm: 95dB (96dB)
- 4000~6000rpm: 103dB (101dB)
-
- Genuine Fujitsubo
- Outlet pipe diameter: 117mm (8°)
- Main pipe diameter: 76.3mm
- Maximum output: 222.4kw(302.5ps)/5670rpm
- Maximum torque: 399.8N･m(40.8kg･m)/4590rpm
- Muffler weight: 12.5kg (19.2kg)
- Exhaust noise (4200rpm): 90dB (87dB)
- *(Factory specifications)
- Made to order, lead time about ~1,5-2,5 month
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Mak
- Fiberglass (FRP)
- Width: 1016 mm
-
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Only avaliable as long as we have stock!
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment:
- Front: 30 steps
- Rear: 30 steps
- Spring rate:
- Front: 22.0 kgf/mm (216 N/mm)
- Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate:
- Front: 19.8 kgf/mm
- Rear: 19.8 kgf/mm
- Free length:
- Front: 170mm
- Rear: 200mm
-
- Genuine HKS
- Location: Left side, behind bumper
- Core size: 200 x 220 x 48 (15 Row)
- Hose size: #10
- Adapter Thermo: M12×P1.25 (1 hole), PT1/8 (1 hole)
- - Thermostat valve operation start temperature 70°C (±3°C)
- Thermostat valve fully closed temperature 80°C (±3°C)
- Includes oil filter relocation
-
- Genuine HKS
- Size (mm): 200-100
- Filter Color: Red (2-layer polyurethane form)
- Replacement filter element: 70001-AK032
- Only for Turbo Vehicles
- NOTE! JZA80: Not Compatible with VVT-i Vehicles
- NOTE! Cannot be mounted in combination with HKS Super SQV
-
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Genuine HKS
- Material: S304 (Stainless steel)
- Tail outer diameter: 124 mm
- Pipe diameter: 85 mm
- Exhaust noise: 97 dB (STD: 95 dB)
-
-
- Genuine Honda
- Required qty. per car: 1 pcs.
-
-
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- Stainless Steel
- J-Pipe delete system
- Stainless filter included
- Includes all hardware needed for installation
-
- Genuin HPI
- Type: Evolve
- Aluminium radiator
- Core size: 57mm
- STD series
- Compatible with MT and AT models
-
- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed.
- Repair parts for old and new type is avaliable.
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed.
- Repair parts for old and new type is avaliable.
-
-
- Genuine JURAN
- Left side (Passenger Side)
- Type: T100
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine JURAN
- Right side (Driver Side)
- Type: T099
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine K.Break
- Material: Fiberglass (FRP)
-
- LEAD TIME: 2-3 months from ordering
- Genuine Kazama Auto
- Made of FRP (Fiberglass reinforcement plastic)
- GT-R racing look front grill
- Including mesh
-
- Genuine Kazama Auto
- Type: Promode
- Material: FRP Fiberglass
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine KOYO
- Toyota OEM no. 90369-49002
-
- Genuine KOYORAD
- Aluminium condenser
- Core size: 670 × 370 × 16
- OEM No. 88460-22560
-
- Genuine KOYORAD
- Genuine replacement
-
- Genuine KOYORAD
- Type: Type R
- Material: Copper
- Core layer: 3
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22090
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22120
-
-
- Genuine Nagisa Auto
- Adjustable range: 95-110mm
- Position: Front
- Set of two pcs.
-
- Genuine Nagisa Auto
- Adjustable range: -10 to -12mm
- Position: Rear
- Set of two pcs.
-
- Genuine NAPREC
- Head diameter:
- IN: φ36 (+1.5)
- EX: φ31.5 (+1.5)
- Stem diameter:
- IN: φ6
- EX φ6 (No Sodium)
- Stem length:
- IN: STD
- EX: STD
- Weight:
IN: 49.3 (-0.5g)
EX: 42g (+-0)
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
Page load link
