- Genuine Tomei
- Gearing: 3.692
- For front and rear differential
-
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment: - Front: 30 steps - Rear: 30 steps
- Spring rate: - Front: 22.0 kgf/mm (216 N/mm) - Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate: - Front: 19.8 kgf/mm - Rear: 19.8 kgf/mm
- Free length: - Front: 170mm - Rear: 200mm
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: CFRP
- Standard factory bonnet weight: 12.6kg
- Varis carbon bonnet weight: 9.7kg
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R34 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS Plastic wrapped in Alcantara
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pillar Set includes A, B/C pillars (Both Sides)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Wing Blade and Wing Stay are sold separately
- Weight approx 2kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Front Undertray has been treated with high gloss clear coating. Wing stand does not have a surface clear coat
- Extra 20mm lip provides a more sporty look
- Designed to be a complete plug and play replacement
- Weight approx 3.5KG
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
- Kit contains: - FRP Front bumper w/Carbon spoiler lip (2 pcs.) - FRP Sideskirts w/Carbon under panel (4 pcs.) - FRP Rear bumper and rear side addons w/Carbon under panel (4 pcs.)
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Muse Concept Design
- Material Dry Carbon with 5mm Honeycomb Core Layer
- Featuring the N1-Style Air Vent Design
- Weight approx 5kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
