- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type R
- Material: Copper
- Core layer: 3
-
- Genuine KOYORAD
- Genuine replacement
-
- Genuine KOYO
- Toyota OEM no. 90369-49002
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine K.Break
- Material: Fiberglass (FRP)
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Carbon Fiber
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed. - Repair parts for old and new type is avaliable.
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed. - Repair parts for old and new type is avaliable.
-
- Genuin HPI
- Type: Evolve
- Aluminium radiator
- Core size: 57mm
- STD series
- Compatible with MT and AT models
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine HKS
- Part no. 31029-AN003
- SSR (Super Turbo Muffler)
- Material: S304 Stainless steel
- Tail outer diameter: 124mm
- Main pipe diameter: 85
- Exhaust noise: - STD: 95dB - HKS: 94dB
- Used/Second hand product
- Really good condition, please judge by photos
- Including original documents
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Genuine HKS
- Size (mm): 200-100
- Filter Color: Red (2-layer polyurethane form)
- Replacement filter element: 70001-AK032
- Only for Turbo Vehicles
- NOTE! JZA80: Not Compatible with VVT-i Vehicles
- NOTE! Cannot be mounted in combination with HKS Super SQV
-
- Genuine HKS
- Location: Left side, behind bumper
- Core size: 200 x 220 x 48 (15 Row)
- Hose size: #10
- Adapter Thermo: M12×P1.25 (1 hole), PT1/8 (1 hole)
- - Thermostat valve operation start temperature 70°C (±3°C) - Thermostat valve fully closed temperature 80°C (±3°C)
- Includes oil filter relocation
-
- Genuine HKS
- Clutch type: Single disk
- Method: Push
- Flywheel weight: 7.2kg (stock flywheel 12.3kg)
- Clutch capacity: 800Nm (178% compared to stock)
- Treading force: 221N (170% compared to stock)
- Bolt On Design (all hardware required is included)
- Repair parts avaliable
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side - Side steps - Rear under spoilers
- Under spoilers fits factory rear bumper
-
- Genuine HKS
- S-Series
- Spring rate: F=98(10)/R=78(8)
- Free length: 200/220(Barrel)
- Standard setting: F: -41(0 - -55) R: -34(0 - -83)
- Daming force adjustment: 30 levels (Front and Rear)
- Upper Mount: Rubber
- Helper spring: Yes (19.8 N/mm)
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment: - Front: 30 steps - Rear: 30 steps
- Spring rate: - Front: 22.0 kgf/mm (216 N/mm) - Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate: - Front: 19.8 kgf/mm - Rear: 19.8 kgf/mm
- Free length: - Front: 170mm - Rear: 200mm
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
Out of stock
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Only avaliable as long as we have stock!
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
- Mounting by double-sided tape or adhesive
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: GMR-3301
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
