- Genuine HKS
- Clutch type: Single disk
- Method: Push
- Flywheel weight: 7.2kg (stock flywheel 12.3kg)
- Clutch capacity: 800Nm (178% compared to stock)
- Treading force: 221N (170% compared to stock)
- Bolt On Design (all hardware required is included)
- Repair parts avaliable
-
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side - Side steps - Rear under spoilers
- Under spoilers fits factory rear bumper
-
- Genuine HKS
- S-Series
- Spring rate: F=98(10)/R=78(8)
- Free length: 200/220(Barrel)
- Standard setting: F: -41(0 - -55) R: -34(0 - -83)
- Daming force adjustment: 30 levels (Front and Rear)
- Upper Mount: Rubber
- Helper spring: Yes (19.8 N/mm)
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment: - Front: 30 steps - Rear: 30 steps
- Spring rate: - Front: 22.0 kgf/mm (216 N/mm) - Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate: - Front: 19.8 kgf/mm - Rear: 19.8 kgf/mm
- Free length: - Front: 170mm - Rear: 200mm
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
Out of stock
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Only avaliable as long as we have stock!
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
- Mounting by double-sided tape or adhesive
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: GMR-3301
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3601A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine Kagotani Garage
- Material: Fiberglass
- Set of left and right fender
- NOTE! Carbon louvers is not inculded, these has to be ordered seperately.
-
- Genuine Garage Kagotani
- Material: Carbon
- Set of left and right louver
- For GK front fenders
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Fujitsubo
- Tailtip style: Round slash φ102 with burning gradiation
- Pipe diameter: 60.5φ - 50.8φ
- Weight: 15.9kg (STD: 19.6kg)
- Volume idling: 60dB (STD: 56dB)
- Proximity exhaust noise (4800 rpm): 89dB (STD: 84dB)
- Exhaust noise 4000rpm~6000rpm: 103dB (STD: 98dB)
- Roof height: 1315mm (Vehicle inspection 1310mm)
- Ground Clearance: 112mm
-
- Genuine Fujitsubo
- Tailtip style: Round slash φ102
- Pipe diameter: 60.5φ - 50.8φ
- Weight: 15.9kg (STD: 19.6kg)
- Volume idling: 60dB (STD: 56dB)
- Proximity exhaust noise (4800 rpm): 89dB (STD: 84dB)
- Exhaust noise 4000rpm~6000rpm: 103dB (STD: 98dB)
- Roof height: 1315mm (Vehicle inspection 1310mm)
- Ground Clearance: 112mm
-
- Genuine Fujitsubo
- Outlet shape: φ101.6 slash (8°)
- Pipe diameter: 60.5φ
- Maximum output: 124.7kw (169.6ps)/6910rpm
- Maximum torque: 187.2N･m(19.1kg･m)/4990rpm
- Muffler weight: 9.9kg
- Volume idling: 69dB
- Proximity exhaust noise (5700rpm): 89dB
- LEAD TIME: Made-to-order ~1 month
-
- Genuine Do-Luck
- Adjustable cross bar
- Plated steel
-
- Genuine D-Max
- Replacement headlamps
- OE style headlamps
- Housing color: Black
- Low beam bulb: H1 (12V 55W)
- High beam bulb: HB3 (12V 65W)
- For models with halogen headlamps - For HID vehicles, you need conversion heaness kit to convert your car in to Halogen (Genuine HID bulbs can't be installed in these headlights)
-
- Genuine D-Max
- Includes mall
- Replacement headlight covers for S15 headlights
- Set of covers for left and right headlight
- Do NOT wipe the covers with a dry cloth only as it's easily scratches.
-
- Genuine Craft Square
- Material: Aluminium/Carbon
- Blue lens is avaliable as optional
- Weight: 430g pr. mirror
- Lead time: ~7-8 month from ordering
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Genuine BRIDE
- Set includes: front and rear floor mats (4 pcs. set)
- Gradiation BRIDE fabric
-
- Genuine BOMEX
- Set of left and right sideskirt
-
- Genuine BOMEX
- Set for left and right side
