- Genuine Toyota
- Code: 89428
-
-
- Genuine TOMEI
- Pump size: 255 L/h
- Including all hardware needed for installation
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- DISCONTINUED ITEM - ONLY AVALIABLE AS LONG AS WE HAVE STOCK!
- Genuine TRD
- Includeing gasket
- Brand new unused item (old stock)
-
- Genuine BLITZ
- Type: A1C
-
- Genuine Toyota
- Code: 31231B
-
- Genuine Drive Joy
- OE Product
- OE Quality
- OEM part no. 90916-02310
- Belt length: 1940mm
-
- Front Pipe Gasket 1JZ-GTE
-
- Original Part No: 31236-14020
-
- Part No: 31234-14030
-
- Part No: 90480-18001
-
- Genuine: Toyota
- Genuine Part No: 35106-24020
-
- Genuine Toyota
- Old part no./Replaces 11214-46010
-
- Genuine Toyota
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22090
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22120
-
- Genuine Toyota
- Code: 04479A
- Set for left and right side
-
- Genuine Toyota
-
- Genuine Origin Labo
- Material: FRP (Fiberglass)
- Type 2 version
-
- Genuine Kazama Auto
- Type: Promode
- Material: FRP Fiberglass
-
- Genuine Toyota
- Intake side
-
- Genuine Toyota
- Exhaust side
-
- Genuine T And E VERTEX
-
- Genuine BLITZ
- Type: ST-36B
-
- Genuine Toyota
- Required qty. per car: 2 pcs
-
- Genuine Nagisa Auto
- Adjustable range: -10 to -12mm
- Position: Rear
- Set of two pcs.
-
- Genuine Nagisa Auto
- Adjustable range: 95-110mm
- Position: Front
- Set of two pcs.
-
- Genuine Toyota
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine BRIDE
- Type: MO
- Drivers side (Right hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
- Genuine BRIDE
- Type: MO
- Passenger side (Left hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
- Genuine Apexi
- Set indluding hand controller (FC Commander)
- Automatic transmission
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 30mm (std. 26.5mm)
- Ratio: 160%
- Color: Blue
- Position: Front
- Including bushes
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 21mm
- Ratio: 131%
- Color: Blue
- Position: Rear
- Including bushes
-
- Genuine Toyota
- Code: 99999
-
- Genuine TOMEI
- Bore: φ87.5
- Thickness: 1.5mm
- Material: Metal
- Structure: Super Grommet
-
- Genuine TOMEI
- Bore: φ87.5
- Thickness: 2.0mm
- Material: Metal
- Structure: Super Grommet
- Compatible with VVTi and Non VVTi
-
- Genuine Beat-Sonic
- Type: SLA-70
- For vehicles with Toyota Super Live Sound
- Not compatible with vehicles with Electro Multi-Vision (EMV).
- For genuine connector with 15 or 14Pin (Single connector)
- For replacement of genuine headunit/system to aftermarket 1DIN or 2DIN
-
- Genuine JURAN
- Right side (Driver Side)
- Type: T099
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine JURAN
- Left side (Passenger Side)
- Type: T100
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine RS-R
- Series: RS-R HD
- Lowering: – Front: 35~30mm – Rear: 30~25mm
- Spring rate: – Front: 7.49kg/mm – Rear: 3.84kg/mm
- Spring color: Black
- Avaliable as seperate front and rear set.
-
- Genuine Project Mu
- Color: Smoke
- Stainless steel fittings
- Teflon hose
- Set of 4 hoses (front and rear)
-
- Genuine TRUST
- Material: Aluminium
- Diamter: 35mm
- W/sensor attatchment
-
- Genuine TRUST
- Material: Aluminium
- Diamter: 35mm
- W/sensor attatchment
-
- DISCONTINUED PRODUCT - ONLY AVALIABLE WHILE IN STOCK.
- Genuine TRD
- JZX100 1JZ-GE please use 17801-JX010
-
- Genuine Toyota
- Code: 53301B
- Required qty. per car: 2 pcs
-
- Genuine Toyota
- Code: 47275
- Required qty. per car: 1 pcs
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Toyta
- Code: 77169A
- Required qty. per car: 1 pcs
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine Top Secret
- Full set with 5 mats (2 front and 3 for the rear)
- Leadtime: ~2-3 weeks
-
- Genuine Toyota
- Code: 58191
- Required qty. pr. car.: 1 pcs
-
- Genuine Rasty
- Material: Stainless steel
- Pipe: 80mm
- Bolt on
- For offroad use ONLY
- Bolts on to stock elbow, and direct catalyzer replacement.
-
- Genuine Rasty
- Plug including o-seal, lock and bolt
- Made of aluminium
-
- Genuine Toyota
- Code: 58206C
- For M/T
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine Advance
- Type: Black Alternator
- Output: 130A
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- LEAD TIME: 2-3 months from ordering
- Genuine Kazama Auto
- Made of FRP (Fiberglass reinforcement plastic)
- GT-R racing look front grill
- Including mesh
-
- Genuine KOYORAD
- Aluminium condenser
- Core size: 670 × 370 × 16
- OEM No. 88460-22560
-
- Genuine Toyota
- For JZX100 with manuel gear
-
- Ganuine JULIUS
- Material: Carbon / Matt finish
- Installation tape included
-
- Genuine KTS
- Material: Steel
- Type: Pillow Ball
- Set of left and right side
- Adjustable
-
- Genuine URAS
- Material: Fiberglass (FRP)
- Type: Style-L
- Lead time: ~2-3 month from ordering
-
- Genuine URAS
- Material: FRP (Fiberglass)
- Type: Style-L
- Set of Left and Right side
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- Stainless Steel
- J-Pipe delete system
- Stainless filter included
- Includes all hardware needed for installation
-
Out of stock
- Genuine Toyota
- Set includes left and right center pillar panel - Comes with 8 pcs clips for installation
- Gloss black color
- Discontinued product! - So only avaliable while in stock.
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Clear crystal glass
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Smoked crystal clear glass
-
- Genuine Toyota
- Set of left and right
-
- Genuine Project Mu
- Set for both left and right side
- Oversize brake shoes for handbrake, with upgraded Supra JZA80 rear calipers and rotors.
-
- Genuine Toyota
- Original number: 81570-22130-C0
- For cars without rear wiper
- For cars with out rear spoiler
- Trim color: BLACK, TRIM2#
-
- Genuine Toyota
- Code: 87240
- Part no.: 87240-22370
-
- Genuine HKS
- Belt size: 6PK1940
- Fan belt
-
- Genuin HPI
- Type: Evolve
- Aluminium radiator
- Core size: 57mm
- STD series
- Compatible with MT and AT models
-
- Genuine Toyota
-
- Genuine HKS
- Compatible with all 1JZ engines
-
- Genuine HKS
-
- Genuine TRD
- Relief pressure 127kPa(1.3kgf/cm²)
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: - OEM: 86 - NÜR SPEC-R: 99
-
- Genuine BLITZ
- Filter colors avaliable: Blue and red
-
- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
