Skip to content
-
- Bumper (FRP), Front Lip (CARBON)
- The kit does not include the genuine daylight kit. If you need it, please order it separately.
- Canards not included. Can be purchased here: Varis Front Bumper Canards Ver. 3 R35 GT-R
- Included: Carbon Lip, Daylight Cover, FRP Bumper Body, Under Panel
- Original GT-R emblem and genuine daylight components can be used
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Genuine Toyota
- Price is pr. set
- Required pr. car: 1 set (1 set contains repair seals for right and left rear brake caliper)
-
-
- Genuine Nissan
- Replacement for 40232-33P55 (discontinued)
-
-
- Genuine Varis
- Material: Dry Carbon VSDC
- 5kg lighter than OEM
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Genuine Varis
- Material: Carbon
- 3kg lighter than OEM
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Clear coat finish
- Often lead time is about ~26 weeks from ordering
-
- Genuine Varis
- Material: Fiberglass
- Type: Fiberglass
- Set includes Left and Right
- 20mm wider on each side
- Often lead time is about ~26 weeks from ordering
-
- Genuine Varis
- Material: Carbon & Fiberglass
- Type: CFRP+FRP
- Set includes Left and Right
- 20mm wider on each side
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Material: Carbon
- Only includes: Front Bumper Canards
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Genuine BLITZ
- Lightweight all-aluminum radiator realizing low price of threat by adopting new core and reviewing manufacturing method.
- A 42 mm thick core and a large capacity tank realize substantial heat capacity increase.
- Design that can install genuine electric fan and fan shroud. (Depending on the model, processing may be necessary for mounting).
- Buff finish on tank, quality is a commitment at a low price.
- Convenient to take out the water temperature sensor, with 1 / 8PT service hall.
- Adopting a new type of outer fin to enhance heat dissipation.
- Designed exclusively for each type of vehicle, adopting different tube pitches depending on the model.
- Alumite finished drain bolt and BLITZ original radiator cap are standard equipment.
-
-
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine KOYORAD
- Type: Type-F
- Material: Aluminium
- 2-Layer
- Color: Aluminium (Buffed)
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass.
Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon.
Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon.
Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Muse Concept Design
- Made of ABS Plastic wrapped in Alcantara
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pillar Set includes A, B/C pillars (Both Sides)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 1.1mm thick polished titanium plate
- Lightweight Design
- Precision Fit (Easy install, no modifications needed).
- High-Strength Titanium alloy to enhance vehicle cooling performance and overall power output
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon with 5mm Honeycomb Core Layer
- Featuring the N1-Style Air Vent Design
- Weight approx 5kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Aftermarket alternative for 1JZ-GE 2JZ-GE 2JZ-GTE
- OEM Quality
-
- Aftermarket alternative for 1JZ-GTE
- Size 137MY25
- OEM Quality
-
- Genuine Toyota
- Front LH Caliper, Supra JZA80
-
- Genuine Toyota
- Front RH Caliper, Supra JZA80
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass.
Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon.
Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon.
Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Material Fiberglass (FRP)
- Bolt-on installation (Reuse the original lip mounting parts)
- (SOME PICTURES ARE OF THE CARBON FIBER VARIANT)
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon Fiber (CFRP)
- Weight 2.25 kg
- Bolt-on installation (Reuse the original lip mounting parts)
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Front Undertray has been treated with high gloss clear coating. Wing stand does not have a surface clear coat
- Extra 20mm lip provides a more sporty look
- Designed to be a complete plug and play replacement
- Weight approx 3.5KG
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- RAW Dry Carbon requires top clear coating or painting
- Original Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left front brake caliper
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55045-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54535-RS520
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54476-RS590
-
-
-
-
-
-
-
-
- Genuine Nissan
- Price per pcs.
-
-
- Genuine HKS
- Complete Kit (4 pcs.)
- Front bumper spoiler (GFRP+CFRP)
- Side skirts (ABS+CFRP)
- Rear bumper spoiler (CFRP)
- Duck tail spoiler (CFRP)
- All parts in this kit is avaliable for seperate purchase
-
-
-
-
-
- Genuine Kondo Engineering Takumi Project
- Takumi - All-Round Spec
- For late models with Brembo 6-Piston
- 2-Piece rotor base
- Size ⌀ 357mm
- Bracket Included
- Set of 2
-
- Genuine Kondo Engineering Takumi Project
- KIWAMI Extreme - Circuit Spec
- For late models with Brembo 6-Piston
- 2-Piece rotor base
- Size ⌀ 357mm
- Bracket Included
- Set of 2
-
- Genuine Kondo Engineering Takumi Project
- Set includes brake lines for both front and rear
- For models equipped with Brembo
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front and rear brake pads (Set)
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 6-Pot Front 2-Pot Rear
- Sport Spec with a temperature range of 0°C to 750°C
- 6-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- 6-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers
- Sport spec for circuit with a temperature range of 0°C to 750°C
- 4-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- 4-POT
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon
- Fits the Takumi Project Aero Bonnet and Genuine OEM Bonnets
- Smoother opening and closing of the bonnet and improves workability
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Fiberglass (FRP)
- Fiberglass Front and Back
-
- Genuine Kondo Engineering Takumi Project
- The backbone is made of lightweight and strong hard carbon. Areas where stress is concentrated are reinforced with honeycomb.
- Waterproof design prevents rainwater from entering without a duct cover
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Pictures are only reference, the MIYABI Version II Bonnet is made of Glassfibre, not Carbon Fibre!
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version I
-
- Genuine Nissan
- For left side
- Code: 62673P
-
- Genuine Nissan
- For left side
- Code: 62674P
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of B Pillar Seatbelt Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Cap
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Switch Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
Page load link
