- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
-
- Genuine D-Max
- Set of left and right fender
- 30mm wider than stock fenders
- Made of FRP (Fiberglass)
- Lead time: ~1,5 month
- Fitment and quality from this manufacture is for drift/race, so please expect that modifications are required.
-
- Genuine Nismo
-
- Genuine KOYORAD
- Aluminium condenser
- Core size: 670 × 370 × 16
- OEM No. 88460-22560
-
- Gebuine Wise Square
- Highly durable material
- Original polycarbonate product
- Lens surface is heat coeated
- Original Nissan butyl rubber is included for installation
- Comes as a set of two (left and right)
-
- Leadtime: 1.5 month from ordering
- Genuine Hello Special
- Material: Fiberglass
- Set includes front and rear overfenders
-
- Leadtime: 1.5 month from ordering
- Genuine Hello Special
- Material: Fiberglass
-
- Genuine M.Speed
- Set of left and right wheel hub
- Front hubs
- 4 Stud type
-
- OE Product
- OEM Quality
- OEM no. 56101-14021
-
Out of stock
- Genuine TRD
- Material: Steel
- Finish: Metallic grey powder coating
- With TRD emblem
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: Clear/blue lens
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Chrome
- Lens color: Blue/Clear
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: Blue/Clear
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine Nismo
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BNR34 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BCNR33 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine DENJI
- Driving type: RHD
- Housing: Black
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: RHD
- Housing: Chrome
- Lens color: ION Blue
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine K.Break
- Material: Fiberglass (FRP)
-
- Genuine Jura Tec
- Carbon Fiber
-
- Genuine Over Tech
- Gloss Black
-
- Genuine FINAL Konnexion
- 20mm wider than stock fenders
- Set of left and right side
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Abflug
- Material: Fiberglass
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine Kazama Auto
- Type: Promode
- Material: FRP Fiberglass
-
- Set of 2 Aluminum brackets for headlight beam conversion. (Converts beam pattern from Japanese standard to European & US standards)
- Suitable for all: Nissan R32 with DE Lens headlights
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine WALD
- Front and rear set
- Fiberglass
- Modifications requied on the panels for installation
-
- Genuine D-Max
- Replacement headlamps
- OE style headlamps
- Housing color: Black
- Low beam bulb: H1 (12V 55W)
- High beam bulb: HB3 (12V 65W)
- For models with halogen headlamps - For HID vehicles, you need conversion heaness kit to convert your car in to Halogen (Genuine HID bulbs can't be installed in these headlights)
-
- OE Quality
- OEM No. G2712-05U01 / 72712-05U01
- With bronze tone
-
- Genuine M.Speed
- With top tone (Two tone)
-
- Genuin HPI
- Type: Evolve
- Aluminium radiator
- Core size: 57mm
- STD series
- Compatible with MT and AT models
-
- Genuine Garage Kagotani
- Material: Carbon
- Set of left and right louver
- For GK front fenders
-
- Genuine SPEED FORME
- Made in Japan
- Material: FRP (Fibre reinforced plastic)
- This product is unpainted
-
- Genuine BOMEX
-
- Genuine T And E VERTEX
-
- Genuine KOYORAD
- Material: Copper
- Thickness: 3-Layer
-
Out of stock
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine Kagotani Garage
- Material: Fiberglass
- Set of left and right fender
- NOTE! Carbon louvers is not inculded, these has to be ordered seperately.
-
- Genuine HKS
- Location: Left side, behind bumper
- Core size: 200 x 220 x 48 (15 Row)
- Hose size: #10
- Adapter Thermo: M12×P1.25 (1 hole), PT1/8 (1 hole)
- - Thermostat valve operation start temperature 70°C (±3°C) - Thermostat valve fully closed temperature 80°C (±3°C)
- Includes oil filter relocation
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed. - Repair parts for old and new type is avaliable.
-
- Genuine 78WORKS
- Set of left and right headlight
- Full LED
- Black housing
- Clear lens cover
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
- Genuine BN Sports
- Material: FRP Fiberglass
-
- Genuine AutoSelect
- Material: Fiberglass (FRP)
-
- Genuien D-Max
- Type: D1Spec
- Material: Carbon
-
- Genuine D-Max
- Material: Carbonfiber (CFRP)
- Type: D1Spec
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine BOMEX
- Fog and indicator -lights is not included.
-
- Genuine Varis
- Series: RIDOX
- NOTE! Carbon louver fender panel is not included, but can be purchased seperately.
-
- Genuine Aero Tech Japan
- Kit includes: - Front bumper - Side skirts - Rear bumper
- Optional: - 1pcs Rear wing - FRP eye line
-
- Genuine Varis
- Series: RIDOX
-
- Genuine: Top Secret
- Material: CFRP (Carbon)
- Type: G-Force
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
- Genuine VOLTEX
- Type: Street Version
- Material: - Upper part: Fiberglass (FRP) - Lower part: Wet carbon + FRP
-
- Genuine HKS
- Core size: 200 x 220 x 48.5/15
- Core mounting position: Inside left fender
-
- Genuine Nismo
- Lead time: UNKNOWN ETA
-
- Genuine TRUST
- Avaliable in 6 different options
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass
- Includes: - Front bumper beam - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass (+ Carbon Option)
- Includes: - Front bumper beam (Carbon Option) - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
