- Genuine Nissan
- Code: 79616
- Reqired qty. per car: 1 pcs
- Old part number: G2716-89901
-
-
- Genuine Nissan
- Code: 79816
- Reqired qty. per car: 1 pcs
-
- Genuine Nissan
- Code: 27441
- Required qty. per car: 2 pcs.
- Replaces OLD part no.: 28931-80F00, B8930-50Y00
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left front brake caliper
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
- Genuine SOFT99
- Glaco
- Replacement rubber
- Size/Length: 375mm
-
- Genuine SOFT99
- Glaco
- Replacement rubber
- Size/Length: 400mm
-
- Genuine SPEED FORME
- Made in Japan
- Material: FRP (Fibre reinforced plastic)
- This product is unpainted
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- Genuine T & E Vertex
- Kit contains: - Front bumper - Sideskirts - Rear bumper
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers
- Sport spec for circuit with a temperature range of 0°C to 750°C
- 4-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 6-Pot Front 2-Pot Rear
- Sport Spec with a temperature range of 0°C to 750°C
- 6-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- 4-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- 6-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front and rear brake pads (Set)
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- The backbone is made of lightweight and strong hard carbon. Areas where stress is concentrated are reinforced with honeycomb.
- Waterproof design prevents rainwater from entering without a duct cover
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Fiberglass (FRP)
- Fiberglass Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Pictures are only reference, the MIYABI Version II Bonnet is made of Glassfibre, not Carbon Fibre!
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Takumi - All-Round Spec
- For late models with Brembo 6-Piston
- 2-Piece rotor base
- Size ⌀ 357mm
- Bracket Included
- Set of 2
-
- Genuine Kondo Engineering Takumi Project
- KIWAMI Extreme - Circuit Spec
- For late models with Brembo 6-Piston
- 2-Piece rotor base
- Size ⌀ 357mm
- Bracket Included
- Set of 2
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon
- Fits the Takumi Project Aero Bonnet and Genuine OEM Bonnets
- Smoother opening and closing of the bonnet and improves workability
