- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine TAKEROS
- Material: Fiberglass
- Lead time: ~1 month (Made on order)
- Shipping calculation on this product is just a estimate, may change when the item is ready to be shipped due to oversize volume.
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine D-Max
- Includes mall
- Replacement headlight covers for S15 headlights
- Set of covers for left and right headlight
- Do NOT wipe the covers with a dry cloth only as it's easily scratches.
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine Nissan
- Code: 49726
- Required qty. depending on model minimum: 2 pcs.
-
- Genuine HKS
- AN001 is compatible with: - Nissan (CA18, CG10, CG13, CGA3, CR10, CR12, CR14, GA15, GA16, HR12, HR15, HR16, KA24, MA10, MR16, MR18, MR20, QG15, QG18, QR20, QR25, RB20, RB25, RB26, SR18, SR20, VG20, VG30, VH41, VH45, VK45, VQ25, VQ30, VQ35, VQ37, VR38) - Honda (B16, B18, B20, D13, D15, D16, E07, F18, F20, F22, F23, H22, J30, K20, K24, L13, L15, LDA, LEA, LEB, P07, R18, R20, S07, ZC) - Suzuki (K6, K12, M15, M16)
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
Out of stock
LIMITED! ONLY AS LONG AS WE HAVE STOCK! Nismo combination meter is a one-piece housing assembly, that can be quicly installed. Simply remove the OEM meter and pud in this new high scale meter.- Genuine Nismo
- OEM Plug'n'Play
- High scale speedo
- Speedo meter scale: 280km/t
- Tacho meter scale: 10,000rpm
- Kms adjustment service is avaliable for 20,000yen extra, please enter the mileage you want it adjusted to in the order comment field.
-
OE replacement spare parts, OE quality made in Japan. This is a complete timingbelt replacement set. The set includes:- Timingbelt
- Waterpump
- Idler
- Tensioner
-
- Genuine 326PoWER
- Lens tint-color: Blue
- Compatible with all S15 models
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine DIXCEL
- Set for left and right side
- RGM type
- Genuine replacement sidebrake inner drum shoes
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine SONAR
- Version 1
- Bulb winker
- LED light/brakelight
- Bulb reverse light
- Black housing
- Smoked cover
-
- Genuine SONAR
- Version 1
- Bulb winker
- LED light/brakelight
- Bulb reverse light
- Black housing
- Clear cover
-
- Genuine Nissan
- For series-2 BNR34 08/2000-
- Compatible with series-1 BNR34's 01/1999-
- Thread type: M12
-
- Genuine TOMEI
- Chrome Moly Alloy (SCM435)
- Up to 10,000 RPM
- M6 P1.00
- Contents: - Bolt x 28 - Nut x 28
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Pair of left and right side
-
- Genuine TAKERO’S
- Material: Carbon fiber (CF)
- Fits typeZERO front bumper spoiler lip
-
- Genuine Nissan
- Code: 49310A
- Required qty. depending on model minimum: 1 pcs.
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine TOMEI
- Material: Titanium
- Main pipe diameter: Φ80.0
- Main pipe thickness: 1mm
- Silencer diameter: Φ152
- Silencer thickness: 1mm
- Sub silencer diameter: Φ120
- Exit diameter: Φ115
- Exit thickness: 1mm
- Flange thickness: 8.0mm
- Weight: 6.0kg (STD: 16.0kg)
- NOTES: For off road use only!
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nismo
- Nissan OEM no.: 65810-83L00
- Qty. per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine 326PoWER
- Lens tint-color: Smoked
- Compatible with all S15 models
-
- Genuine 326PoWER
- Lens tint-color: Clear
- Compatible with all S15 models
-
- Genuine Nissan
- Fits RH+LH
- Reqired qty. per car: 2 pcs
- Replaces: 84431-AA400 / 84430-AA400
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Nissan
- Code: 27441
- Required qty. per car: 2 pcs.
- Replaces OLD part no.: 28931-80F00, B8930-50Y00
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Works Bell
- Note: Super Hicas
- For None SRS (Airbag) models
- Type: Standard
- Length: 65mm
-
- Made in Japan
- Genuine leather
- Black leather
- Purple stitching
-
- Material: Body/Polyester taffeta
- Wire / Carbon Steel
- Front + storage case
- First generation NISMO logo print
-
- Material: PVC resin (Hiboscal)
- Carbon look
- First generation NISMO logo included
- Set of 2
-
- Color: Black, gray stitching
- Back: Resin spike pin
- Compliant with domestic safety standards
- First-generation NISMO logo plate included (front left and right, rear center)
- 1 year warranty
-
- Made by Sabelt
- 4-point
- Right seat model
- Belt width (shoulder/waist): 3 inches
- Belt color: Black
- Compliant with FIA standard "8854/98"
-
- Size: Body/Height 63mm, φ37, Screw 10mm
- 5-speed shift pattern plate
- Cannot be installed on A/T vehicles. *Can also be installed on NISMO solid shift and NISMO quick shift.
-
- Set for one vehicle (driver's seat, passenger seat, rear seat)
- Material : Body: PVC leather; Seat and backrest: Ultrasuede (punched), base fabric (tricot fabric)
- Color PVC leather fabric: Black Ultrasuede (punched) Base fabric (tricot fabric): Black Stitching: Black
- First generation NISMO logo (driver's seat, passenger seat)
- Seat back pockets (driver's seat, passenger seat)
- 1 year warranty
-
- Size: Outer diameter Φ350
- Material: Main body grip and center pad surface - genuine leather (part of grip is perforated leather)
- Body and stitching color: Black
- Spokes: Hairline finish
- First-generation NISMO logo (steering wheel body, center pad, horn button)
- Base steering wheel body: Made by ATC, which has a proven track record in "Gr-C type steering wheels." The cross section of the grip is a slightly thick oval shape, and the back of the grip is uneven.
-
- Size: Large (middle row) 100mm x 170mm, 2 pieces Medium (top row) 59mm x 100mm, 2 pieces Small (bottom row) 43mm x 74mm, 2 pieces
-
- Color: Silver (base) + Black (logo) Silver (base) + Blue (logo)
- Size: 25×100mm
- Material: Stainless steel
- Tape fastening type
-
- Material: PVC resin (Hiboscal)
- Carbon look
- First generation NISMO logo included
- Set of 2 (for 2 doors)
- *Cannot be installed on rear doors.
-
- Set of 3 lock bolts, 1 special key, 3 original NISMO logo stickers
- Lock bolt head size: diameter 18mm
- 1 year warranty
-
- Set of 3 lock bolts, 1 special key, 3 original NISMO logo stickers
- Lock bolt head size: diameter 18mm
- 1 year warranty
-
- Material: Machined aluminum
- Thread size: M33 pitch 3.5mm
- Heat-resistant rubber O-ring included
- First generation NISMO logo included
- Logo plate: Stainless steel sticker type
- 1 year warranty
-
- PRE-ORDER FROM October 25, 2024 (Friday) - January 31, 2025 (Friday)
- Price is listed per wheel
- Skyline GT-R (BNR32) all vehicles 18x9.0J inset 22 Reference tire size 245/40R18 (front and rear same size) **Note! Cannot be installed at the same time as NISMO Circuit Link
- Skyline GT-R (BCNR33, BNR34) All vehicles 18x9.5J inset 12 Reference tire size 265/35R18 (same size for front and rear)
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- Material: Sulfur free-cutting steel (SUM43L) (machined + hardened) + nickel chrome plating (excluding washer)
- Shape: Tapered seat
- First generation NISMO logo (lug nuts)
- Color: Dark Chrome
- Size: Total length 31.5mm, thread depth 12mm, thread size M12x1.25
- Made by McGuard
- 4 security lock nuts, 16 lug nuts, 1 security lock nut socket, 1 lug nut socket
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- Made from pure titanium
- Weight: 1.4kg
- First generation NISMO logo plate (stainless steel, riveted)
- Accessories: Complete set of mounting accessories
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- First generation NISMO logo included
- Outer diameter φ45
- Valve pressure P = 1.3kg/cm2
- Seal: Heat-resistant silicone rubber
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- First generation NISMO logo included
- 1 year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- When installing, please use the included cushioning material in areas with little space between the product and surrounding parts.
- Depending on the individual vehicle, installation may require skill, so please contact a specialist store that has the correct knowledge and know-how.
- When installing on the BCNR33, a protective tube or tie wrap may be required to avoid interference with the electric fan. Please purchase separately.
- When installing on a BCNR33, the intercooler upper mount stay needs to be modified.
- 1 Year warranty
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- Set of metal catalyst integrated front pipe + center silencer integrated center pipe + main muffler
- Material: Exhaust finisher: titanium alloy, other parts: stainless steel
- Exhaust finisher: DLC coating, riveted, with original NISMO logo
- Pipe diameter: Main φ80, Tail φ110
- Proximity noise level: 89dB
- 1 year warranty
- The NE-1 exhaust system is a semi-dual exhaust system that includes a sports catalyst and meets safety standards, and maximizes the performance of the RB26DETT engine.
- This product features an exhaust finisher (made from high-purity titanium alloy) with a DLC coating to achieve a distinctive, luxurious black color, and also features the first-generation NISMO logo.
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 90 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 30mm down – Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
