Skip to content
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine Jura Tec
- Kit contains:
- Caliper brackts (LH+RH)
- Bolts and hardware for installation
- Special made genuine drum shoe set (LH+RH) to fit R35 GT-R brake drum bell
**All shown in the photo
-
- Genuine Jura Tec
- Set of left and right brake drum shoe
- Special made for R35 brake drum (when installing R35 GT-R Brakes on BNR34 and BCNR33 Skyline)
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Made in Japan
- Genuine leather
- Black leather
- Purple stitching
-
-
-
- Genuine M.Speed
- With top tone (Two tone)
-
- Genuine M.Speed
- Material: FRP
- Set contains front and over rear fenders
- Reference to genuine Kenmeri GT-R
-
- Genuine M.Speed
- Diameter: 220mm
- Mounting hole: 100 x 70mm
-
- Genuine M.Speed
- Set of left and right wheel hub
- Front hubs
- 4 Stud type
-
- Genuine M.Speed
- Material: Steel
- Price is pr. panel
- Can be used for left and right side
- Length: ~120cm
- If out of stock lead time is about 2~3 weeks from ordering.
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material 3K Dry Carbon Fiber
- RAW Dry Carbon requires top clear coating or painting
- Weight 20g
- Often lead time is about ~8 weeks from ordering
- Compatibility, OEM Aluminum Bonnets for BNR32, BCNR33, BNR34 (cutting & inlay required, template included)
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R32 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R34 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material Dry Carbon Fiber with 5mm Honeycomb Core Layer
- RAW Dry Carbon requires top clear coating or painting
- Weight approx 5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon with 5mm Honeycomb Core Layer
- Featuring the N1-Style Air Vent Design
- Weight approx 5kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Weight approx 200g
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Plug-and-play installation, no wiring modifications required, connects directly to the factory cigarette lighter harness
- 1 Type C and 1 USB Charger outputs
- Can be directly inserted into the factory expansion slot of R33 and R34 models
- For installation in the Center Armrest of R32, R33, or R34, a cutout is required, a cutout template is included for easy installation
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Authentic Original Style Design
- Made of ABS with 1:1 top vinyl
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster cover panel
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster lower cover trim
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- Dashboard Defrost Vents Left and Right
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right vent
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 2 Pieces that clicks into one
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS (Textured)
- Top Mounting Cover and Sensor Cover
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Front Undertray has been treated with high gloss clear coating. Wing stand does not have a surface clear coat
- Extra 20mm lip provides a more sporty look
- Designed to be a complete plug and play replacement
- Weight approx 3.5KG
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Wing Blade and Wing Stay are sold separately
- Weight approx 2kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- OEM Wing Blade fit and finish, just carbon!
- Weight approx 690 grams
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- 100mm taller than the original wing stay, reduces weight improves downforce
- Weight approx 400g per side
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Weight 135g per side
- Comes as a pair of left and right brake duct
- Reducing weight and increase structural strength
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Very light weight 1.1KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Replacement inserts for your OEM R34 GT-R Seats
- 1 Pair (purchase 2 pairs if you need for both seats)
- Material ABS Plastic
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- RAW Dry Carbon requires top clear coating or painting
- Original Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Nappa Leather and Alcantara
- D-Shape Design
- Available in Grey and Red stitching
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS Plastic wrapped in Alcantara
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pillar Set includes A, B/C pillars (Both Sides)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Available in Grey and Red Stitching
- Material Alcantara
- Replacement for both RHD and LHD 2008-2016 model R35 GT-R
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Available in Grey and Red Stitching
- Material ABS Plastic and Alcantara
- 1 pair of doorhandles (Left and Right)
- Replacement for both RHD and LHD 2008-2016 model R35 GT-R
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- Catless
- Pipe Size φ89mm
- Even length type
- Weight 2.85kg
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS plastic
- Reducing wight and increase structual rigidity for preventing the surface to make cracks in the pait over time.
- Comes as a pair of left and right rear spat
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of B Pillar Seatbelt Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Available in Grey and Red Stitching
- D-Shape Steering Wheel
- 385mm diameter, flat bottom
- Nappa Leather and Alcantara trimmed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material ABS Plastic
- High quality replacement in satin black
- Compatible with all R34 Skylines
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.6KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- High Performance 89MM High Flow Catalytic Converter
- Weight 1.3KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 1.1mm thick polished titanium plate
- Lightweight Design
- Precision Fit (Easy install, no modifications needed).
- High-Strength Titanium alloy to enhance vehicle cooling performance and overall power output
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- Titanium Front Y Pipe
- Pipe Size φ70 x2 -φ89
- Even Length Type
- Weight 2.7KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 89MM Test Pipe
- Weight 600g
- Simple solution to eliminate exhaust restriction in GT-R exhaust systems
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- Main Pipe φ102mm Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 8.7KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Cap
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Switch Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine NAPREC
- Head diameter:
- IN: φ36 (+1.5)
- EX: φ31.5 (+1.5)
- Stem diameter:
- IN: φ6
- EX φ6 (No Sodium)
- Stem length:
- IN: STD
- EX: STD
- Weight:
IN: 49.3 (-0.5g)
EX: 42g (+-0)
-
- Genuine NAPREC
- Thickness: 2.75mm
-
- Genuine NAPREC
- Thickness: 2.80mm
-
- Genuine NAPREC
- Thickness: 3.50mm
-
- Genuine NAPREC
- Thickness: 3.55mm
-
- Genuine NAPREC
- Thickness: 3.60mm
-
- Material: PVC resin (Hiboscal)
- Carbon look
- First generation NISMO logo included
- Set of 2 (for 2 doors)
- *Cannot be installed on rear doors.
-
- Material: PVC resin (Hiboscal)
- Carbon look
- First generation NISMO logo included
- Set of 2
-
- Color: Black, gray stitching
- Back: Resin spike pin
- Compliant with domestic safety standards
- First-generation NISMO logo plate included (front left and right, rear center)
- 1 year warranty
-
- Size: Body/Height 63mm, φ37, Screw 10mm
- 5-speed shift pattern plate
- Cannot be installed on A/T vehicles.
*Can also be installed on NISMO solid shift and NISMO quick shift.
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) - March 31, 2025 (Monday)
- When installing, please use the included cushioning material in areas with little space between the product and surrounding parts.
- Depending on the individual vehicle, installation may require skill, so please contact a specialist store that has the correct knowledge and know-how.
- When installing on the BCNR33, a protective tube or tie wrap may be required to avoid interference with the electric fan.
Please purchase separately.
- When installing on a BCNR33, the intercooler upper mount stay needs to be modified.
- 1 Year warranty
-
- PRE-ORDER FROM October 25, 2024 (Friday) - January 31, 2025 (Friday)
- Price is listed per wheel
- Skyline GT-R (BNR32) all vehicles
18x9.0J inset 22 Reference tire size 245/40R18 (front and rear same size)
**Note! Cannot be installed at the same time as NISMO Circuit Link
- Skyline GT-R (BCNR33, BNR34) All vehicles
18x9.5J inset 12 Reference tire size 265/35R18 (same size for front and rear)
-
- Size: Large (middle row) 100mm x 170mm, 2 pieces
Medium (top row) 59mm x 100mm, 2 pieces
Small (bottom row) 43mm x 74mm, 2 pieces
Page load link
