- Genuine Kondo Engineering Takumi Project
- Bolt-on bracket included, no drilling required.
- Material Carbon and Fiberglass
- Back side clear coated (Side facing up)
- Weight 1.8kg
-
-
- Genuine Kondo Engineering Takumi Project
- Weight approx 4.5 kg
- Material Carbon and Fiberglass (CFRP/FRP)
- UV-Resistant clear gel coat finish
- Reinforced wing base
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Weight 3.5 kg
- Material Hard Carbon (with honeycomb layer)
- UV-Resistant clear gel coat finish
- Reinforced wing base
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 94
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 93
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 90
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 89
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 89
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 89
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 93
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 94
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Material Fiberglass (FRP)
- Bolt-on installation (Reuse the original lip mounting parts)
- (SOME PICTURES ARE OF THE CARBON FIBER VARIANT)
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon Fiber (CFRP)
- Weight 2.25 kg
- Bolt-on installation (Reuse the original lip mounting parts)
