- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Fiberglass (FRP)
- Fiberglass Front and Back
-
- Genuine Kondo Engineering Takumi Project
- The backbone is made of lightweight and strong hard carbon. Areas where stress is concentrated are reinforced with honeycomb.
- Waterproof design prevents rainwater from entering without a duct cover
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the front brake pads
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Spoon Sports
- Made in Japan
- For street and track use
-
- Genuine SilkRoad
- Set of 2 pcs. (left and right)
- For rear knuckle lower arm
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
-
- Genuine RS-R
- Series: RS-R HD
- Lowering: – Front: 35~30mm – Rear: 30~25mm
- Spring rate: – Front: 7.49kg/mm – Rear: 3.84kg/mm
- Spring color: Black
- Avaliable as seperate front and rear set.
-
- Genuine RS-R
- Series: Ti2000 DOWN
- Lowering: – Front: 35~40mm – Rear: 20~25mm
- Spring rate: – Front: 8.33kg/mm – Rear: 4.20kg/mm
- Spring color: Black
- JAN Code: 227880
- Avaliable as seperate front and rear set
-
- Genuine Revolfe S.A.
- Kit includes: - 3 blue silicone hoses - 6 stainless steel hose bands
-
- Genuine Rasty
- Material: Stainless steel
- Pipe: 80mm
- Bolt on
- For offroad use ONLY
- Bolts on to stock elbow, and direct catalyzer replacement.
-
- Genuine Rasty
- Plug including o-seal, lock and bolt
- Made of aluminium
-
- Genuine Project Mu
- Color: Smoke
- Stainless steel fittings
- Teflon hose
- Set of 4 hoses (front and rear)
-
- Genuine Project Mu
- Set for both left and right side
- Oversize brake shoes for handbrake, with upgraded Supra JZA80 rear calipers and rotors.
-
- OE replacement parts
- Kit includes: - Oil filter - Air filter - 3x Spark plugs - Alternator belt - Air conditioning belt
- Manufacture could be different in the actual set, but will still be same type of product
-
- Aftermarket replacement part
- Full set
- Includes installation tool
-
- Genuine PIT WORK
- Replacement part
- Gasket included
- Full set
-
- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
-
- Genuine Origin Labo
- Material: FRP (Fiberglass)
- Type 2 version
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine ORC
- System: Push type
- With spring dampers
- Discs: Single
- Disc Outer Diameter: 200mm
- Torque response Nm (kgfm): 340(35)
- Kit includes: - Clutch cover - Clutch disc - Flywheel - Flywheels bolts - Release bearing - Pilot bearing
-
- Genuine Okuyama Carbing
- Material: Carbon fiber
-
- Genuine Okuyama Carbing
- Material: Aluminium
-
Compatible models: TOYOTA GT86 / SUBARU BRZ Applicable model: ZN6 / ZC6 Year : 2012-2020 Product type: HAL / DFV Upper mount: Front Pillow ball, camber adjustable Rear Rubber mount, camber fixed ■ Standard lowering amount (height adjustment range): Front -15mm (-30 to +5mm) Rear -15mm (-30 to +5mm) ■ Free length / spring rate: Front 180mm / 9K Rear 180mm / 7K -
Compatible models: TOYOTA GR86 / SUBARU BRZ Applicable model: ZN8 / ZD8 Year : 2022- Product type: HAL / DFV Upper mount: Front Pillow ball, camber adjustable Rear Rubber mount, camber fixed ■ Standard lowering amount (height adjustment range): Front -15mm (-30 to +5mm) Rear -15mm (-30 to +5mm) ■ Free length / spring rate: Front 180mm / 9K Rear 180mm / 7K
-
Compatible models: Toyota GR Supra Applicable model: DB42/DB02 Year : 2019-2025 ■ Height adjustment range Standard vehicle height (adjustment range +/-) Front -15mm (+15/-5mm) Rear -15mm (-/-mm) ■ Spring rate Front 9Kgf/mm Rear 16Kgf/mm ■ Type HAL/DFV ■ Remarks This kit is a complete kit. The image is a product image. If you need a cancellation kit (35020-30), please contact us. * This product is ordered from the manufacturer. If the manufacturer has stock, it can be prepared in a few days. However, if the manufacturer is out of stock or some made-to-order products are made to order, it may take some time to prepare the product. * Product delivery dates are constantly changing. If you need it urgently, please check the delivery date before placing your order. When you place an order , we will check the information of your car, such as the year and model, on the vehicle inspection certificate, etc., as there may be cases where it can be installed. *The vehicle height adjustment range is an estimate. Errors may occur due to the grade of the vehicle being installed, equipment, and changes in parts over time. *The photos shown are product images. Actual product may differ depending on size and specifications. *Regarding vehicle inspection compliance: Please use the product at your own risk and make sure you understand the safety standards of the Road Transport Act before using it. -
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- OE Parts
- Timingbelt
- Tensioner
- Waterpump
-
- OE Product
- Made in Japan
- OEM Quality parts
- Kit includes: - Timingbelt - Waterpump - Idler tensioner - Timing tensioner
-
- Genuine Nagisa Auto
- Adjustable range: -10 to -12mm
- Position: Rear
- Set of two pcs.
-
- Genuine Nagisa Auto
- Adjustable range: 95-110mm
- Position: Front
- Set of two pcs.
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22120
-
- Genuine Miyaco Motors
- Genuine part no. 04479-22090
-
- Aftermarket alternative for 1JZ-GTE
- Size 137MY25
- OEM Quality
-
- Aftermarket alternative for 1JZ-GE 2JZ-GE 2JZ-GTE
- OEM Quality
-
- Genuine LAILE
- Material: Aluminium
- Material thickness: 2.0mm
- Weight: 3.3kg
- Bolt On with genuine radiator
