-
- Genuine Kondo Engineering x RAYS
- Size: 18×9.5J
- Offset: +34
- PCD: 5x114.3
- Face4
- Color: Matte Blue Gunmetal
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers
- Sport spec for circuit with a temperature range of 0°C to 750°C
- 4-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 6-Pot Front 2-Pot Rear
- Sport Spec with a temperature range of 0°C to 750°C
- 6-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Sport Spec with a temperature range of 0°C to 750°C
- Rear 2-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 6-Pot Front 2-Pot Rear
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the rear brake pads
- Rear 2-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- 4-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- 6-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 6-Pot Front 2-Pot Rear
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
- Rear 2-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru Imprezas with Brembo Calipers 4-Pot Front 2-Pot Rear
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
- Rear 2-POT
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front and rear brake pads (Set)
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Street Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the rear brake pads
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Weight 2.72 kg
- Material Hard Carbon
- UV-Resistant clear gel coat finish
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Weight 3.5 kg
- Material Hard Carbon (with honeycomb layer)
- UV-Resistant clear gel coat finish
- Reinforced wing base
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Weight approx 4.5 kg
- Material Carbon and Fiberglass (CFRP/FRP)
- UV-Resistant clear gel coat finish
- Reinforced wing base
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- The backbone is made of lightweight and strong hard carbon. Areas where stress is concentrated are reinforced with honeycomb.
- Waterproof design prevents rainwater from entering without a duct cover
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Fiberglass (FRP)
- Fiberglass Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Pictures are only reference, the MIYABI Version II Bonnet is made of Glassfibre, not Carbon Fibre!
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Takumi - All-Round Spec
- For late models with Brembo 6-Piston
- 2-Piece rotor base
- Size ⌀ 357mm
- Bracket Included
- Set of 2
-
- Genuine Kondo Engineering Takumi Project
- KIWAMI Extreme - Circuit Spec
- For late models with Brembo 6-Piston
- 2-Piece rotor base
- Size ⌀ 357mm
- Bracket Included
- Set of 2
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon
- Fits the Takumi Project Aero Bonnet and Genuine OEM Bonnets
- Smoother opening and closing of the bonnet and improves workability
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon Fiber (CFRP)
- Weight 2.25 kg
- Bolt-on installation (Reuse the original lip mounting parts)
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 89
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 89
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 90
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 89
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Fiberglass (FRP)
- Bolt-on installation (Reuse the original lip mounting parts)
- (SOME PICTURES ARE OF THE CARBON FIBER VARIANT)
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 94
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Tail hardened with Takumi Project logo laser engraved
- Material Titanium
- Weight 5.25kg
- Sound dB 93
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 94
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering Takumi Project
- Material Titanium
- Weight 5.25kg
- Sound dB 93
- Main pipe diameter ⌀ 76.3 mm
- Tail end diameter ⌀ 114 mm
-
- Genuine Kondo Engineering x RAYS
- Size: 17×9J
- Offset: +38
- PCD: 5x100
- Face3
- Color: Bronze
-
- Genuine Kondo Engineering x RAYS
- Size: 17×9J
- Offset: +38
- PCD: 5x100
- Face3
- Color: Dash White
-
- Genuine Kondo Engineering x RAYS
- Size: 17×9J
- Offset: +38
- PCD: 5x100
- Face3
- Color: Diamond Dark Gunmetal
