- Ganuine JULIUS
- Material: Carbon / Matt finish
- Installation tape included
-
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine BRIDE
- Colour: Gradiation version
- Shell Materials: Super Aramid (carbon)
- System: LOWMAX
- This WIDE model is 30mm wider than standard model
- Weight: 8kg
- Cover material: Flame retardant fabric
- FIA Approved: YES
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine TAKERO’S
- Material: Carbon fiber (CF)
- Fits typeZERO front bumper spoiler lip
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Nismo
- Printed with little Nismo logo
- Dry-carbon material
- Installed with double sided tape
- Plug'n'Play install
-
- Genuine Garage Active
- Material: Carbon
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
-
- Genuine Kondo Engineering Takumi Project
- Weight approx 4.5 kg
- Material Carbon and Fiberglass (CFRP/FRP)
- UV-Resistant clear gel coat finish
- Reinforced wing base
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Weight 3.5 kg
- Material Hard Carbon (with honeycomb layer)
- UV-Resistant clear gel coat finish
- Reinforced wing base
- Remove both torsion bars (trunk springs) before installing
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass. Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon. Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon. Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Lower piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon Fiber (CFRP)
- Weight 2.25 kg
- Bolt-on installation (Reuse the original lip mounting parts)
-
- Genuine Kondo Engineering Takumi Project
- Weight 2.72 kg
- Material Hard Carbon
- UV-Resistant clear gel coat finish
- Remove both torsion bars (trunk springs) before installing
-
- Genuine HKS
- Complete Kit (4 pcs.) - Front bumper spoiler (GFRP+CFRP) - Side skirts (ABS+CFRP) - Rear bumper spoiler (CFRP) - Duck tail spoiler (CFRP)
- All parts in this kit is avaliable for seperate purchase
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon
- Fits the Takumi Project Aero Bonnet and Genuine OEM Bonnets
- Smoother opening and closing of the bonnet and improves workability
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine Kondo Engineering Takumi Project
- The backbone is made of lightweight and strong hard carbon. Areas where stress is concentrated are reinforced with honeycomb.
- Waterproof design prevents rainwater from entering without a duct cover
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version I
-
- Genuine BRIDE
- Colour: Gradiation version
- Shell Materials: Carbon
- System: LOWMAX
- 30mm wider than the standard model
- 10mm wider at the shoulder part than the standard model
- Weight: 8kg
- Cover material: Flame retardant fabric
- FIA Approved: YES
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
- Kit contains: - FRP Front bumper w/Carbon spoiler lip (2 pcs.) - FRP Sideskirts w/Carbon under panel (4 pcs.) - FRP Rear bumper and rear side addons w/Carbon under panel (4 pcs.)
-
- Genuine Origin Labo
- Material: Carbon fiber
- Type: Ver.2
-
- Genuine SPEED FORME
- Made in Japan
- Type-II
- Material: Carbon fibre
-
- Genuine Top Secret
- Set of left and right
- Material: CFRP (Carbon)
- Set contains side and center generator
-
- Genuine Top Secret
- Set of left and right
- Material: CFRP (Carbon)
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: GMR-3301
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: GMR-3301
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- ETA: Unknown (2023-6/9)
- Genuine HKS Kansai Service
- Material: Carbon fiber
-
- Genuine: Top Secret
- Material: CFRP (Carbon)
- Type: G-Force
-
- Genuine D-Max
- Material: Carbonfiber (CFRP)
- Type: D1Spec
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BCNR33 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BNR34 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3601A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine Craft Square
- Material: Aluminium/Carbon
- Blue lens is avaliable as optional
- Weight: 430g pr. mirror
- Lead time: ~7-8 month from ordering
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass (+ Carbon Option)
- Includes: - Front bumper beam (Carbon Option) - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine ARTISAN SPIRITS
- Material: CFRP (Carbon Fiber Reinforcement Plastic)
-
- Genuine VOLTEX
- Material: Wet Carbon
- Width: 1500mm
- Fits: CT9A VII, VIII, IX (7, 8, 9)
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
- Genuine Garage Kagotani
- Material: Carbon
- Set of left and right louver
- For GK front fenders
-
Out of stock
- Genuine Spirit Rei
- Material: Carbon
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side - Side steps - Rear under spoilers
- Under spoilers fits factory rear bumper
-
- Genuine Top Secret
- Materials: Carbon
- Replaces the OE front diffuser/undercover
- Slightly bigger shape than OE, delivers bigger downforce
-
- Genuine VOLTEX
- Material: Carbon
- Lead time: Made on order (5~6 month)
- Ultra light weight
- Highly vented design
-
- Genuine VOLTEX
- Type: Street Version
- Material: Wet Carbon
- Set contains left and right side skirt
-
- Genuine VOLTEX
- Type: Street Version
- Material: - Upper part: Fiberglass (FRP) - Lower part: Wet carbon + FRP
-
- Genuine TAKERO’S
- Material: Carbon fiber (CF)
- Only wing flap, wing is NOT included
- Can be installed on OEM 260RS rear wing
