- Genuine Top Secret
- Materials: Carbon
- Replaces the OE front diffuser/undercover
- Slightly bigger shape than OE, delivers bigger downforce
-
-
- Genuine T & E Vertex
- Kit contains: - Front bumper - Sideskirts - Rear bumper
-
- Genuine Aero Tech
- Rando Ryu Lux
- Material: FRP
- Comes as a set of left and right eye line
-
- Genuine Origin Labo
- Material: FRP (Fiberglass)
- Type 2 version
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
- Mounting by double-sided tape or adhesive
-
- LEAD TIME: 2-3 months from ordering
- Genuine Kazama Auto
- Made of FRP (Fiberglass reinforcement plastic)
- GT-R racing look front grill
- Including mesh
-
- Genuine M.Speed
- Material: FRP
- Set contains front and over rear fenders
- Reference to genuine Kenmeri GT-R
-
- Genuine URAS
- Material: Fiberglass (FRP)
- Type: Style-L
- Lead time: ~2-3 month from ordering
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuine D-Max
- Set of left and right fender
- 30mm wider than stock fenders
- Made of FRP (Fiberglass)
- Lead time: ~1,5 month
- Fitment and quality from this manufacture is for drift/race, so please expect that modifications are required.
-
- Genuine Mag Factory
- Material: Fiberglass
- Set of front and rear over fenders
- ~40mm wide
-
- Leadtime: 1.5 month from ordering
- Genuine Hello Special
- Material: Fiberglass
- Set includes front and rear overfenders
-
- Leadtime: 1.5 month from ordering
- Genuine Hello Special
- Material: Fiberglass
-
- Genuine Aero Tech
- Lead time 3-4 weeks from ordering
-
- Genuine TAKEROS
- Material: Fiberglass
- Lead time: ~1 month (Made on order)
- Shipping calculation on this product is just a estimate, may change when the item is ready to be shipped due to oversize volume.
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine TRA Kyoto
- Material: Fiberglass FRP
- Type: Rocket Bunny
-
- Genuine FINAL Konnexion
- 20mm wider than stock fenders
- Set of left and right side
-
- Genuine FINAL Konnexion
- 50mm wider than stock fenders
- Set of left and right side
-
- Genuine TAKERO'S
- Material: FRP Fiberglass
- Set contain 4 pieces for left and right side
- Compatible with early and late model C34 Stagea
-
- Genuine SPEED FORME
- Made in Japan
- Type-II
- Material: FRP (Fibre reinforced plastic)
- This product is unpainted
-
- Genuine Kazama Auto
- Type: Promode
- Material: FRP Fiberglass
-
- Genuine WALD
- Front and rear set
- Fiberglass
- Modifications requied on the panels for installation
-
- Genuine BN Sports
- Material: FRP Fiberglass
- Set of right and left sideskirt
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Pair of left and right side
-
In terms of size, compared to the genuine Subaru product (STI under spoiler with skirt lip), the overall height is approximately 10mm higher, the width of the front center recess is approximately 20mm higher, and the maximum protruding part is approximately 15mm longer. It is about one size larger. -
A well-calculated, highly functional and stylish design. It is a part that adds a sense of speed to the face and has a great dress-up effect. The perfect fit to the complex shaped bumper is a quality that only Takumi Project can provide. We have also released a carbon canard for the upper section, which can be updated to a twin canard. *Not compatible with vehicles equipped with the S208 under spoiler. *Cannot be installed on under spoilers for the S207 and VAG tS. *Installation parts (screws, bolts, nuts, etc.) are not included. *Installation requires skill. We recommend asking a specialist shop for installation. -
- Genuine Kagotani Garage
- Material: Fiberglass
- Set of left and right fender
- NOTE! Carbon louvers is not inculded, these has to be ordered seperately.
-
In terms of size, compared to the genuine Subaru product (STI under spoiler with skirt lip), the overall height is approximately 10mm higher, the width of the front center recess is approximately 20mm higher, and the maximum protruding part is approximately 15mm longer. It is about one size larger. The weight that sports enthusiasts will be concerned about is 2.25 kg for the carbon (CFRP) type, which is a minimal increase in weight. -
A well-calculated, highly functional and stylish design. It is a part that adds a sense of speed to the face and has a great dress-up effect. The perfect fit to the complex shaped bumper is a quality that only Takumi Project can provide. We have also released a carbon canard for the upper section, which can be updated to a twin canard. *Not compatible with vehicles equipped with the S208 under spoiler. *Cannot be installed on under spoilers for the S207 and VAG tS. *Installation parts (screws, bolts, nuts, etc.) are not included. *Installation requires skill. We recommend asking a specialist shop for installation.
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- typeZERO
- Bumper has integrated FRP diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine ARTISAN SPIRITS
- Material: Fiberglass (FRP)
- Photo shows the CFRP version, the actual product is FRP
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Fiberglass (FRP)
- Fiberglass Front and Back
-
- Genuine Nismo
- Material: FRP
- Comes as a pair (left and right side)
- Including all hardware needed for installation
- Avaliable for seperate purchase, if you only need left of right sideskirt
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine Varis
- Series: RIDOX
- NOTE! Carbon louver fender panel is not included, but can be purchased seperately.
-
- Genuine Aero Tech Japan
- Kit includes: - Front bumper - Side skirts - Rear bumper
- Optional: - 1pcs Rear wing - FRP eye line
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Pictures are only reference, the MIYABI Version II Bonnet is made of Glassfibre, not Carbon Fibre!
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version II
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: Fiberglass (FRP) (unpainted gelcoat finish)
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
- Genuine VOLTEX
- Type: Street Version
- Material: - Upper part: Fiberglass (FRP) - Lower part: Wet carbon + FRP
-
- Leadtime: ~3 month from ordering
- Genuine BN Sports
- Kit contains: - Front bumper - Sideskirts - Rear bumper
- Material: FRP Fiberglass
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass
- Includes: - Front bumper beam - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
