- Genuine BOMEX
-
- Genuine Kagotani Garage
- Material: Fiberglass
- Set of left and right fender
- NOTE! Carbon louvers is not inculded, these has to be ordered seperately.
-
In terms of size, compared to the genuine Subaru product (STI under spoiler with skirt lip), the overall height is approximately 10mm higher, the width of the front center recess is approximately 20mm higher, and the maximum protruding part is approximately 15mm longer. It is about one size larger. The weight that sports enthusiasts will be concerned about is 2.25 kg for the carbon (CFRP) type, which is a minimal increase in weight. -
A well-calculated, highly functional and stylish design. It is a part that adds a sense of speed to the face and has a great dress-up effect. The perfect fit to the complex shaped bumper is a quality that only Takumi Project can provide. We have also released a carbon canard for the upper section, which can be updated to a twin canard. *Not compatible with vehicles equipped with the S208 under spoiler. *Cannot be installed on under spoilers for the S207 and VAG tS. *Installation parts (screws, bolts, nuts, etc.) are not included. *Installation requires skill. We recommend asking a specialist shop for installation. -
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- typeZERO
- Bumper has integrated FRP diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine ARTISAN SPIRITS
- Material: Fiberglass (FRP)
- Photo shows the CFRP version, the actual product is FRP
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Fiberglass (FRP)
- Fiberglass Front and Back
-
- Genuine Nismo
- Material: FRP
- Comes as a pair (left and right side)
- Including all hardware needed for installation
- Avaliable for seperate purchase, if you only need left of right sideskirt
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine Varis
- Series: RIDOX
- NOTE! Carbon louver fender panel is not included, but can be purchased seperately.
-
- Genuine Aero Tech Japan
- Kit includes: - Front bumper - Side skirts - Rear bumper
- Optional: - 1pcs Rear wing - FRP eye line
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Pictures are only reference, the MIYABI Version II Bonnet is made of Glassfibre, not Carbon Fibre!
- Fiberglass (FRP)
- Fiberglass Front and Back
- Version II
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: Fiberglass (FRP) (unpainted gelcoat finish)
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
- Genuine VOLTEX
- Type: Street Version
- Material: - Upper part: Fiberglass (FRP) - Lower part: Wet carbon + FRP
-
- Leadtime: ~3 month from ordering
- Genuine BN Sports
- Kit contains: - Front bumper - Sideskirts - Rear bumper
- Material: FRP Fiberglass
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass
- Includes: - Front bumper beam - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass (+ Carbon Option)
- Includes: - Front bumper beam (Carbon Option) - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
-
- Genuine TRA Kyoto
- Rocket Bunny
- Kit contains: - Front bumper including mesh-net - Front lip including staybars - Front fender (RH + LH) - Rear fender (RH + LH) - Rear diffuser - Rear duck tail wing - LED turn signal for front bumper
- All parts are available for purchase separately
- Lead time: ~1 month from ordering
-
- Genuine HKS
- Complete Kit (4 pcs.) - Front bumper spoiler (GFRP+CFRP) - Side skirts (ABS+CFRP) - Rear bumper spoiler (CFRP) - Duck tail spoiler (CFRP)
- All parts in this kit is avaliable for seperate purchase
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
- Kit contains: - FRP Front bumper w/Carbon spoiler lip (2 pcs.) - FRP Sideskirts w/Carbon under panel (4 pcs.) - FRP Rear bumper and rear side addons w/Carbon under panel (4 pcs.)
