-
- Genuine Honda
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Bando Chemical
- Compatible genuine no. 11720-85V00
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
Out of stock
- Genuine Drive Joy
- Genuine Honda part no.: 14520-PN4-004
-
- Genuine GMB
- Made in Japan
- Genuine Honda part no.: 19200-PN3-013
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nismo
- Nissan OEM no.: 65810-83L00
- Qty. per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Modes
- OEM Part no. 51225-671-003
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Works Bell
- Note: Super Hicas
- For None SRS (Airbag) models
- Type: Standard
- Length: 65mm
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine Nismo
- Old Nissan OEM no. 28860-01U00, 28850-01U00
- Kit contents: Pivot holder, washer, C ring, dust seal (pivot arm and bending washer are reused) (This kit replaces NISMO Heritage Parts 28860=RHR20)
- Qty required per car. 1 or 2 kit
-
- Genuine Nismo
- OEM part no. - 68742-01U00 - 68743-01U00 - 68740-01U00 - 68741-01U00
- Delivery starts from mid april 2024
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Maruichi Rubber Ind.
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 44333-SJ6-300
-
- Seiken
- Fits: Rear Right & Left inner.
- Includes 1 pcs.
- Genuine no. 44333-ST5-J01
-
- Honda Oem
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42335-SJ6-013
-
- Maruichi Rubber Ind.
- Fits: Front Right & Left inner .
- Includes 1 pcs.
- Genuine no. 44315-SD5-013
-
- Seiken
- Fits: Front Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42018-SR7-J21
-
- Sankei 555
- Fits: Right & Left
- Includes 1 pcs.
- Genuine no. 53540-SJ6-003
-
- Genuine T & E Vertex
- Kit contains: - Front bumper - Sideskirts - Rear bumper
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
Out of stock
- Genuine Honda
- Required per car: 4 pcs.
- 8X94
-
- Genuine Honda
- Required per car: 4 pcs.
- 12 POINT 8X23.5
-
- Genuine DIXCEL
- Set of two discs (left and right)
-
- Genuine Works Bell
- Specific for Skyline R32 GT-R (BNR32)
- Can be used for both types of steering connector (7 and 12 o'clock direction)
- For 12 o'clock direction connector with normal RAPFIX II, you need this: Connector 12 RAPFIX II Plug (12,100 yen)
- Boss cover is not included, please purchase seperately (9,680 yen)
-
-
- Genuine Miyaco Motors
- Made in Japan
-
-
- Genuine DIXCEL
- KP Type
- Set for left and right
-
- Genuine DIXCEL
- KD Type
- Set of 2 pcs.
-
- Genuine DIXCEL
- PD Type
- Set of 2 pcs.
-
- Genuine Miyaco Motors
- OEM Honda no. 53537-SJ6-000
-
- Genuine Miyaco Motors
- OEM Honda no. 53538-SJ6-000
