-
- Genuine Honda
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Bando Chemical
- Compatible genuine no. 11720-85V00
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine Drive Joy
- Genuine Honda part no.: 14520-PN4-004
-
- Genuine Drive Joy
- Genuine Honda part no.: 14510-PN4-003
-
- Genuine GMB
- Made in Japan
- Genuine Honda part no.: 19200-PN3-013
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nismo
- Nissan OEM no.: 65810-83L00
- Qty. per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Replaces genuine part no.: 31200-PN3-003
- OE Rebuild product
-
- Genuine Nissan
- Discontinued
- Replacement for this part can be found here Nissan Front Hub Seal
-
- Genuine Jura Tec
- Kit contains: - Caliper brackts (LH+RH) - Bolts and hardware for installation - Special made genuine drum shoe set (LH+RH) to fit R35 GT-R brake drum bell **All shown in the photo
-
- Genuine Garage Active
- Material: Carbon
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
-
- Genuine Garage Active
- Material: FRP (Fiberglass)
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
- NOTE! Photo shows the carbon verion, this actual product is the FRP version
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine Bando
- Belt, Compressor
- Replacement for 38920-P36-003
-
- Genuine Muse Concept Design
- Plug-and-play installation, no wiring modifications required, connects directly to the factory cigarette lighter harness
- 1 Type C and 1 USB Charger outputs
- Can be directly inserted into the factory expansion slot of R33 and R34 models
- For installation in the Center Armrest of R32, R33, or R34, a cutout is required, a cutout template is included for easy installation
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R32 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55045-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54535-RS520
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 54476-RS590
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of B Pillar Seatbelt Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Cap
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Switch Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster lower cover trim
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster cover panel
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS (Textured)
- Top Mounting Cover and Sensor Cover
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- Dashboard Defrost Vents Left and Right
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right vent
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 2 Pieces that clicks into one
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Authentic Original Style Design
- Made of ABS with 1:1 top vinyl
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Weight 135g per side
- Comes as a pair of left and right brake duct
- Reducing weight and increase structural strength
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- High Performance 89MM High Flow Catalytic Converter
- Weight 1.3KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 89MM Test Pipe
- Weight 600g
- Simple solution to eliminate exhaust restriction in GT-R exhaust systems
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- Titanium Front Y Pipe
- Pipe Size φ70 x2 -φ89
- Even Length Type
- Weight 2.7KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material 3K Dry Carbon Fiber
- RAW Dry Carbon requires top clear coating or painting
- Weight 20g
- Often lead time is about ~8 weeks from ordering
- Compatibility, OEM Aluminum Bonnets for BNR32, BCNR33, BNR34 (cutting & inlay required, template included)
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material Dry Carbon Fiber with 5mm Honeycomb Core Layer
- RAW Dry Carbon requires top clear coating or painting
- Weight approx 5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Very light weight 1.1KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS plastic
- Reducing wight and increase structual rigidity for preventing the surface to make cracks in the pait over time.
- Comes as a pair of left and right rear spat
- Often lead time is about ~8 weeks from ordering
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Modes
- OEM Part no. 51225-671-003
