- Genuine 78WORKS
- Set of left and right headlight
- Full LED
- Black housing
- Clear lens cover
-
-
- Genuine Bando
- Belt, Compressor
- Replacement for 38920-P36-003
-
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 284 x 490 x 102mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BN Sports
- Material: FRP Fiberglass
- Set of right and left sideskirt
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Genuine D-Max
- Material: Carbonfiber (CFRP)
- Type: D1Spec
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
- OE Quality
- OEM No. G2712-05U01 / 72712-05U01
- With bronze tone
-
- Genuine Fujitsubo
- Pipe diameter: 60.5
- Outlet shape: φ90 slash (12°･RL)
- Weight: 17.6
- Volume idling: 67dB (68dB)
- Prox exhaust noise at 5.250rpm: 95dB (97dB)
- 3000rpm: 83dB (84dB)
- 5000rpm: 95dB (96dB)
- 4000~6000rpm: 103dB (101dB)
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Maruichi Rubber Ind.
- Fits: Front Right & Left inner .
- Includes 1 pcs.
- Genuine no. 44315-SD5-013
-
- Seiken
- Fits: Front Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42018-SR7-J21
-
- Seiken
- Fits: Rear Right & Left inner.
- Includes 1 pcs.
- Genuine no. 44333-ST5-J01
-
- Maruichi Rubber Ind.
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 44333-SJ6-300
-
- Sankei 555
- Fits: Right & Left
- Includes 1 pcs.
- Genuine no. 53540-SJ6-003
-
- Genuine Honda
- No# 5
- Replacement part no. 53461-SJ6-010
-
- Honda Oem
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42335-SJ6-013
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Miyaco Motors
- OEM Honda no. 53537-SJ6-000
-
- Genuine Miyaco Motors
- OEM Honda no. 53538-SJ6-000
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material 3K Dry Carbon Fiber
- RAW Dry Carbon requires top clear coating or painting
- Weight 20g
- Often lead time is about ~8 weeks from ordering
- Compatibility, OEM Aluminum Bonnets for BNR32, BCNR33, BNR34 (cutting & inlay required, template included)
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R32 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material Dry Carbon Fiber with 5mm Honeycomb Core Layer
- RAW Dry Carbon requires top clear coating or painting
- Weight approx 5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Plug-and-play installation, no wiring modifications required, connects directly to the factory cigarette lighter harness
- 1 Type C and 1 USB Charger outputs
- Can be directly inserted into the factory expansion slot of R33 and R34 models
- For installation in the Center Armrest of R32, R33, or R34, a cutout is required, a cutout template is included for easy installation
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Authentic Original Style Design
- Made of ABS with 1:1 top vinyl
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster cover panel
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster lower cover trim
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- Dashboard Defrost Vents Left and Right
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right vent
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 2 Pieces that clicks into one
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS (Textured)
- Top Mounting Cover and Sensor Cover
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Weight 135g per side
- Comes as a pair of left and right brake duct
- Reducing weight and increase structural strength
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Very light weight 1.1KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
