- Genuine Toyota
- MARK #3
- Replaces: 11071-46010-03
-
-
- Genuine Toyota
- MARK #2
- Replaces: 11071-46010-02
-
- Genuine DENJI
- Driving type: RHD
- Housing: Black
- Lens color: ION Golden
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Black
- Lens color: ION Golden
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine DENJI
- Driving type: LHD
- Housing: Chrome
- Lens color: ION Golden
- Cover type: OEM look
- Low beam: H3 12V 55W
- High beam: H1 12V 55W
- Including harness for installation
- Lead time is about 1 month from ordering if not in stock
-
- Genuine Toyota
- For license plate lamp bracket for JZA80 Supra, JZZ30 Soarer
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Works Bell
- Note: Super Hicas
- For None SRS (Airbag) models
- Type: Standard
- Length: 65mm
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
Out of stock
- DISCONTINUED ITEM - ONLY AVALIABLE AS LONG AS WE HAVE STOCK!
- Genuine TRD
- Includeing gasket
- Brand new unused item (old stock)
-
- Genuine Nismo
- Old Nissan OEM no. 28860-01U00, 28850-01U00
- Kit contents: Pivot holder, washer, C ring, dust seal (pivot arm and bending washer are reused) (This kit replaces NISMO Heritage Parts 28860=RHR20)
- Qty required per car. 1 or 2 kit
-
- Genuine Nismo
- OEM part no. - 68742-01U00 - 68743-01U00 - 68740-01U00 - 68741-01U00
- Delivery starts from mid april 2024
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
- Genuine: Toyota
- Genuine Part No: 48198-50011
- Fits for: JZA80, jZZ30, JZZ31, JZS147
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Genuine Toyota
- Old part no./Replaces 11214-46010
-
- Maruichi Rubber Ind.
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 44333-SJ6-300
-
- Seiken
- Fits: Rear Right & Left inner.
- Includes 1 pcs.
- Genuine no. 44333-ST5-J01
-
- Honda Oem
- Fits: Rear Right & Left outter.
- Includes 1 pcs.
- Genuine no. 42335-SJ6-013
-
- Maruichi Rubber Ind.
- Fits: Front Right & Left inner .
- Includes 1 pcs.
- Genuine no. 44315-SD5-013
-
- Sankei 555
- Fits: Right & Left
- Includes 1 pcs.
- Genuine no. 53540-SJ6-003
-
- Genuine T & E Vertex
- Kit contains: - Front bumper - Sideskirts - Rear bumper
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Works Bell
- Specific for Skyline R32 GT-R (BNR32)
- Can be used for both types of steering connector (7 and 12 o'clock direction)
- For 12 o'clock direction connector with normal RAPFIX II, you need this: Connector 12 RAPFIX II Plug (12,100 yen)
- Boss cover is not included, please purchase seperately (9,680 yen)
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Genuine Miyaco Motors
- OEM Honda no. 53538-SJ6-000
-
- Genuine Miyaco Motors
- OEM Honda no. 53537-SJ6-000
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine TOMEI
- Material: Titanium (Stainless steel)
- Main pipe dia: Φ70×2-Φ80 (Φ60×2-Φ70)
- Pipe thickness: 1 mm (2 mm
- Flange thickness: 8 mm (8 mm)
- Weight: 2.4 kg (5.6 kg) (Weight reduce 3.2 kg)
- (STANDARD PART)
-
- Genuine Nismo
- Rear mount (Transmission)
-
- Genuine Nissan
- Set of two visors (left and right)
-
- Genuine Ohno Rubber Industry
