- Genuine TOMEI
-
- Genuine TOMEI
- SUS316 Full Cast
- Exit diameter: ~66mm
- Volume: 800cc / 900cc
- Pipe thickness: ~2.8mm
- Flange thickness: ~11mm
- Weight: 1.85kg / 2.10kg
-
- Genuine Tomei
- ※This relocation requires modification on the stock Alternator harnesses. ※This product is a kit of brackets and bolts to relocate the Alternator. Serpentine belt, wire harness or any other parts required for the relocation are not included in the kit.
-
- Genuine Tomei
- Gearing: 3.692
- For front and rear differential
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
- Genuine T & E Vertex
- Kit contains: - Front bumper - Sideskirts - Rear bumper
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Spoon Sports
- Made in Japan
- For street and track use
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
Out of stock
- Genuine Spirit Rei
- Material: Carbon
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
-
- Genuine RS-R
- Series: Ti2000 DOWN
- Lowering: – Front: 35~40mm – Rear: 20~25mm
- Spring rate: – Front: 8.33kg/mm – Rear: 4.20kg/mm
- Spring color: Black
- JAN Code: 227880
- Avaliable as seperate front and rear set
-
- Genuine Revolfe S.A.
- Kit includes: - 3 blue silicone hoses - 6 stainless steel hose bands
-
- Genuine REIMAX
- 150 cells x 2
- Flange diameter: 80mm
- Main diameter: 110mm
- Material: SUS304 Stainless Steel
-
- Genuine Project Mu
- Color: Smoke
- Stainless steel fittings
- Teflon hose
- Set of 4 hoses (front and rear)
-
- Genuine PITWORK / Nissan
- Code: 13070M
- Required qty. per car: 1 pcs
-
- Genuine OS GIKEN
- Type: TS2BD
- Discs: Twin
- Cover: Pressed steel cover
- System: Push
- W/ Spring damper
- Torque response Nm (kgf/m): 9,800 (1,000)
- Disc Outer Diameter: 204mm
- Lead time: 1 month
-
- Genuine Ohno Rubber Industry
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- OE Parts
- Timingbelt
- Tensioner
- Waterpump
-
- OE Products
- Made in Japan
- Complete timingbelt replacement set
- Timingbelt
- Waterpump
- Idler + tensioner
-
- Genuine Nissan
- Required qty. per car: 2 pcs
-
- Genuine Nissan
- Set of two visors (left and right)
-
- Genuine Nissan
- Part Code: 44217A
- Required qty. per car: 2 pcs
- Price is listed per clip
-
- Genuine Nissan
- Code: 40202
- Compatible for Right and Left side
-
- Genuine Nissan
- Blank master key
- GT-R Logo
- Til R33 og R32 GT-R
-
- Genuine Nissan
- Code: 41630
- For Nissan models with ATESSA system
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nismo
- Nissan OEM no.: 65810-83L00
- Qty. per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Nismo
- Nissan OEM no.: 14808-05U10
- Label type: Caution emission control
- BNR32: '93/02~ BCNR33: '95/01~
-
- Genuine Nismo
- Old Nissan OEM no. 28860-01U00, 28850-01U00
- Kit contents: Pivot holder, washer, C ring, dust seal (pivot arm and bending washer are reused) (This kit replaces NISMO Heritage Parts 28860=RHR20)
- Qty required per car. 1 or 2 kit
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nismo
- Nissan part no. 26124-05U00
-
- Genuine Nismo
- Nissan part no. 26129-05U00
-
- Genuine Nismo
- OEM part no. - 68742-01U00 - 68743-01U00 - 68740-01U00 - 68741-01U00
- Delivery starts from mid april 2024
-
- Genuine Nismo
- Rear mount (Transmission)
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine NAPREC
- Head diameter: - IN: φ36 (+1.5) - EX: φ31.5 (+1.5)
- Stem diameter: - IN: φ6 - EX φ6 (No Sodium)
- Stem length: - IN: STD - EX: STD
- Weight: IN: 49.3 (-0.5g) EX: 42g (+-0)
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Material: Copper
- Thickness: 3-Layer
