Skip to content
-
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine TOMEI
- Material: Titanium (Stainless steel)
- Main pipe dia: Φ70×2-Φ80 (Φ60×2-Φ70)
- Pipe thickness: 1 mm (2 mm
- Flange thickness: 8 mm (8 mm)
- Weight: 2.4 kg (5.6 kg) (Weight reduce 3.2 kg)
- (STANDARD PART)
-
- Genuine D-Max
- Set of left and right fender
- 30mm wider than stock fenders
- Made of FRP (Fiberglass)
- Lead time: ~1,5 month
- Fitment and quality from this manufacture is for drift/race, so please expect that modifications are required.
-
- Genuine OS Giken
- Exclusively for OS-88
-
- Genuine Nismo
- Rear mount (Transmission)
-
-
-
- Genuine Nismo
- Nissan OEM no.: 14808-05U10
- Label type: Caution emission control
- BNR32: '93/02~
BCNR33: '95/01~
-
- Genuine Toyota
- Exhaust side
-
- Genuine Toyota
- Intake side
-
- Genuine Project Mu
- Type: Sports
- Inner shoe for side brake
- Non-Asbestos
- 0 - 400°C
-
- Genuine BN Sports
- Material: FRP Fiberglass
- Set of right and left sideskirt
-
- Genuine BN Sports
- Material: FRP Fiberglass
-
- Genuine Toyota
- Filler and drain plug
- Required pcs. per cer: 2 pcs4430
-
-
- Genuine TOMEI
- SUS316 Full Cast
- Exit diameter: ~66mm
- Volume: 800cc / 900cc
- Pipe thickness: ~2.8mm
- Flange thickness: ~11mm
- Weight: 1.85kg / 2.10kg
-
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
- Genuine D-Max
- Smoked lens
- Chrome housing
- Set contains: Right + Left lamp and center garnish panel (3 pieces)
-
- Genuine Toyota
- Required qty. per car: 2 pcs
-
- Genuine Nismo
- Set of two pcs (left and right ornament plate)
-
-
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment:
- Front: 30 steps
- Rear: 30 steps
- Spring rate:
- Front: 22.0 kgf/mm (216 N/mm)
- Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate:
- Front: 19.8 kgf/mm
- Rear: 19.8 kgf/mm
- Free length:
- Front: 170mm
- Rear: 200mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring:
- Front: 16kgf/mm H200mm φ65
- Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio)
- Front: About 30mm down
- Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup)
- Front: ±15mm
- Rear: ±15mm
-
- Genuine Nissan
- Required qty. per car: 2 pcs
-
Page load link
