- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
-
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Nismo
- Material: FRP
- Comes as a pair (left and right side)
- Including all hardware needed for installation
- Avaliable for seperate purchase, if you only need left of right sideskirt
-
- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
- Genuine BLITZ
- Filter colors avaliable: Blue and red
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: - OEM: 86 - NÜR SPEC-R: 99
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: – OEM: 87 – NÜR SPEC-R: 94
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine Nissan
- Blank master key
- GT-R Logo
- Til R33 og R32 GT-R
-
Out of stock
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 284 x 490 x 102mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: CFRP
- Standard factory bonnet weight: 12.6kg
- Varis carbon bonnet weight: 9.7kg
-
- Genuin HPI
- Type: Evolve
- Aluminium radiator
- Core size: 57mm
- STD series
- Compatible with MT and AT models
-
- Genuine TOMEI
- Material: Titanium
- Main pipe diameter: Φ80.0
- Main pipe thickness: 1mm
- Silencer diameter: Φ152
- Silencer thickness: 1mm
- Sub silencer diameter: Φ120
- Exit diameter: Φ115
- Exit thickness: 1mm
- Flange thickness: 8.0mm
- Weight: 6.0kg (STD: 16.0kg)
- NOTES: For off road use only!
-
OE replacement spare parts, OE quality made in Japan. This is a complete timingbelt replacement set. The set includes:- Timingbelt
- Waterpump
- Idler
- Tensioner
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- Stainless Steel
- J-Pipe delete system
- Stainless filter included
- Includes all hardware needed for installation
-
- Genuine Toyota
- Original number: 81570-22130-C0
- For cars without rear wiper
- For cars with out rear spoiler
- Trim color: BLACK, TRIM2#
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Project Mu
- Set for both left and right side
- Oversize brake shoes for handbrake, with upgraded Supra JZA80 rear calipers and rotors.
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- Genuine Toyota
- Color code: 057
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Smoked crystal clear glass
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Clear crystal glass
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
- Genuine Toyota
- Code: 75573C
- Required qty. pr. car: 1 pcs
-
- Genuine Toyota
- Code: 75533
- Required qty. pr. car. 1 pcs
-
Out of stock
- Genuine Toyota
- Set includes left and right center pillar panel - Comes with 8 pcs clips for installation
- Gloss black color
- Discontinued product! - So only avaliable while in stock.
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuine URAS
- Material: FRP (Fiberglass)
- Type: Style-L
- Set of Left and Right side
-
- Genuine URAS
- Material: Fiberglass (FRP)
- Type: Style-L
- Lead time: ~2-3 month from ordering
-
- Genuine Toyota
- Code: 75533E
- Required pr. car: 1 qty.
-
- Genuine Toyota
- For JZX100 with manuel gear
-
- Genuine KOYORAD
- Aluminium condenser
- Core size: 670 × 370 × 16
- OEM No. 88460-22560
-
- LEAD TIME: 2-3 months from ordering
- Genuine Kazama Auto
- Made of FRP (Fiberglass reinforcement plastic)
- GT-R racing look front grill
- Including mesh
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Toyota
- Required qty. per. car: 1 pcs
- Code: 52611
-
- Genuine Toyota
- Code: 75314
- Required pr. car: 1 pcs
- Satin silver
-
- Genuine Toyota
- Code: 75471B
- Required pr. car: 1 pcs
- Satin silver
-
- Genuine Nissan
- Code: 40202
- Compatible for Right and Left side
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine Toyota
- Code: 75552
- Left side
- Required qty. pr. car: 1 pcs
-
- Genuine Toyota
- Code: 75551
- Right side
- Required qty. pr. car: 1 pcs
-
- Genuine Rasty
- Plug including o-seal, lock and bolt
- Made of aluminium
-
- Genuine Rasty
- Material: Stainless steel
- Pipe: 80mm
- Bolt on
- For offroad use ONLY
- Bolts on to stock elbow, and direct catalyzer replacement.
-
- Genuine Toyota
- Code: 58191
- Required qty. pr. car.: 1 pcs
-
- Genuine KOYORAD
- Material: Copper
- Thickness: 3-Layer
-
Out of stock
- Genuine TRD
- Material: Steel
- Finish: Metallic grey powder coating
- With TRD emblem
-
- Genuine Fujitsubo
- Type: Legalis R
- Material: Stainless steel
- Pipe diameter: 60.5
- Tailtip style: 90mm
- dB specification: 90db (4800 rpm) - STD: 84 dB (4800 rpm)
- Weight: ~14.1kg
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine Toyota
- Code: 85330
- Reqired qty. per car: 1 pcs
-
- Genuine Toyta
- Code: 77169A
- Required qty. per car: 1 pcs
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Nissan
- Code: 92425
- Required qty. per car: 1 pcs
-
- Genuine Tomei
- Gearing: 3.692
- For front and rear differential
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine PITWORK / Nissan
- Code: 13070M
- Required qty. per car: 1 pcs
-
- Genuine Toyota
- Code: 56111
- Glass color: Insulated UV green / Blue blur
- Genuine part no. 56111-3A140 (560623000)
- Mirror base: None
- Required sub parts: 1x 75531-30290
-
- Genuine Toyota
- Code: 78770A
- Required qty. per car: 1 pcs
-
- Genuine Toyota
- Code: 53301B
- Required qty. per car: 2 pcs
-
- Genuine FINAL Konnexion
- 20mm wider than stock fenders
- Set of left and right side
-
- Genuine FINAL Konnexion
- 50mm wider than stock fenders
- Set of left and right side
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BCNR33 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- DISCONTINUED PRODUCT - ONLY AVALIABLE WHILE IN STOCK.
- Genuine TRD
- JZX100 1JZ-GE please use 17801-JX010
-
- Genuine REIMAX
- Main diameter: 80mm
- Exit diameter: 2 x 80mm
- Material: SUS304 Stainless Steel
- Approx 96db
-
- Genuine REIMAX
- Main diameter: 65 x 2 (flange inner diameter 70mm) - 80mm
- Material: SUS304 Stainless Steel
-
- Genuine REIMAX
- 150 cells x 2
- Flange diameter: 80mm
- Main diameter: 110mm
- Material: SUS304 Stainless Steel
