- Genuine BLITZ
- Lightweight all-aluminum radiator realizing low price of threat by adopting new core and reviewing manufacturing method.
- A 42 mm thick core and a large capacity tank realize substantial heat capacity increase.
- Design that can install genuine electric fan and fan shroud. (Depending on the model, processing may be necessary for mounting).
- Buff finish on tank, quality is a commitment at a low price.
- Convenient to take out the water temperature sensor, with 1 / 8PT service hall.
- Adopting a new type of outer fin to enhance heat dissipation.
- Designed exclusively for each type of vehicle, adopting different tube pitches depending on the model.
- Alumite finished drain bolt and BLITZ original radiator cap are standard equipment.
-
-
- Genuine Nissan
- Discontinued
- Replacement for this part can be found here Nissan Front Hub Seal
-
- Genuine Toyota
- Price is pr. piece
- Required pr. car: 4 pcs. (2 piston per caliper)
-
- Genuine Toyota
- Price is pr. piece
- Required pr. car: 2 pcs. (1 piston per caliper)
-
- Genuine Toyota
- Price is pr. set
- Required pr. car: 1 set (1 set contains repair seals for right and left rear brake caliper)
-
- Genuine Toyota
- Price is pr. set
- Required pr. car: 1 set (1 set contains repair seals for right and left rear brake caliper)
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine TOMEI
- Material: Titanium
- Main pipe diameter: Φ80.0
- Main pipe thickness: 1mm
- Silencer diameter: Φ152
- Silencer thickness: 1mm
- Sub silencer diameter: Φ120
- Exit diameter: Φ115
- Exit thickness: 1mm
- Flange thickness: 8.0mm
- Weight: 6.0kg (STD: 16.0kg)
- NOTES: For off road use only!
-
- Genuine Toyota
- Original number: 81570-22130-C0
- For cars without rear wiper
- For cars with out rear spoiler
- Trim color: BLACK, TRIM2#
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- Genuine Toyota
- Color code: 057
-
Out of stock
- Genuine Nismo
- Aluminium
- Complete kit with installation hardware
- Better and quicker response
-
- Genuine Toyota
- Code: 75533
- Required qty. pr. car. 1 pcs
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Origin Labo
- Material: Fiberglass
- Finish: Gelcoate
- Set of left and right side
- ~20mm wider than stock fender (pr. side)
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
Out of stock
- DELIVERY TIME IS UNKNOWN, ORDERS ARE NOT BEING TAKEN FOR THIS ITEM
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine WALD
- Front and rear set
- Fiberglass
- Modifications requied on the panels for installation
