- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: - OEM: 86 - NÜR SPEC-R: 99
-
- Genuine KOYORAD
- Type: Type R
- Material: Copper
- Core layer: 3
-
- Genuine ORC
- System: Push type
- With spring dampers
- Discs: Single
- Disc Outer Diameter: 200mm
- Torque response Nm (kgfm): 340(35)
- Kit includes: - Clutch cover - Clutch disc - Flywheel - Flywheels bolts - Release bearing - Pilot bearing
-
- Genuine Fujitsubo
- Model: Legalis R
- JAN Code: 4944997715836
- Outlet shape: 117mm round lash II
- Pipe diameter: 76.3mm
- Muffler weight: 13.8kg (STD: 17.8kg)
- Idling volume: 66dB (STD: 62dB)
- Proximately Exhaust volume at 4,800rpm: 90dB (STD: 88dB)
- Burned gradiation tailtip is avaliable
-
Out of stock
- Genuine Apexi
- Set indluding hand controller (FC Commander)
- Automatic transmission
-
- Genuine REIMAX
- Main diameter: 80mm
- Exit diameter: 2 x 80mm
- Material: SUS304 Stainless Steel
- Approx 96db
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
- Genuine REIMAX
- 150 cells x 2
- Flange diameter: 80mm
- Main diameter: 110mm
- Material: SUS304 Stainless Steel
-
- Genuine HKS
- Material: S304 (Stainless steel)
- Tail outer diameter: 124 mm
- Pipe diameter: 85 mm
- Exhaust noise: 97 dB (STD: 95 dB)
-
- Genuine Muse Concept Design
- Material Titanium
- Titanium Front Y Pipe
- Pipe Size φ70 x2 -φ89
- Even Length Type
- Weight 2.7KG
- Often lead time is about ~8 weeks from ordering
-
LIMITED! ONLY AS LONG AS WE HAVE STOCK! Nismo combination meter is a one-piece housing assembly, that can be quicly installed. Simply remove the OEM meter and pud in this new high scale meter.- Genuine Nismo
- OEM Plug'n'Play
- High scale speedo
- Speedo meter scale: 300km/t
- Tacho meter scale: 10,000rpm
- Kms adjustment service is avaliable for 20,000yen extra, please enter the mileage you want it adjusted to in the order comment field.
-
- Genuine Nismo
- Material: FRP
- Comes as a pair (left and right side)
- Including all hardware needed for installation
- Avaliable for seperate purchase, if you only need left of right sideskirt
-
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 284 x 490 x 102mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine TOMEI
- Material: Titanium (Stainless steel)
- Main pipe dia: Φ70×2-Φ80 (Φ60×2-Φ70)
- Pipe thickness: 1 mm (2 mm
- Flange thickness: 8 mm (8 mm)
- Weight: 2.4 kg (5.6 kg) (Weight reduce 3.2 kg)
- (STANDARD PART)
-
- Genuine Varis
- Series: RIDOX
- NOTE! Carbon louver fender panel is not included, but can be purchased seperately.
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
-
Out of stock
- Genuine Nismo
- Aluminium
- Complete kit with installation hardware
- Better and quicker response
-
- Genuine OS GIKEN
- Type: TS2BD
- Discs: Twin
- Cover: Pressed steel cover
- System: Push
- W/ Spring damper
- Torque response Nm (kgf/m): 9,800 (1,000)
- Disc Outer Diameter: 204mm
- Lead time: 1 month
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Genuine TOMEI
- Material: Titanium
- Main pipe diameter: Φ80.0
- Main pipe thickness: 1mm
- Silencer diameter: Φ152
- Silencer thickness: 1mm
- Sub silencer diameter: Φ120
- Exit diameter: Φ115
- Exit thickness: 1mm
- Flange thickness: 8.0mm
- Weight: 6.0kg (STD: 16.0kg)
- NOTES: For off road use only!
-
- Genuine Spirit Rei
- Material: Fiberglass (FRP)
- Kit includes: - Front bumper - Side steps - Rear bumper
- Lead time is about 1-2 month from ordering. (If not in stock)
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: Fiberglass (FRP) (unpainted gelcoat finish)
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
-
- Genuine HKS
- S-Series
- Spring rate: F=98(10)/R=78(8)
- Free length: 200/220(Barrel)
- Standard setting: F: -41(0 - -55) R: -34(0 - -83)
- Daming force adjustment: 30 levels (Front and Rear)
- Upper Mount: Rubber
- Helper spring: Yes (19.8 N/mm)
-
- PRE-ORDER FROM September 17, 2024 (Tuesday) – March 31, 2025 (Monday)
- Collector volume: 4.1L (genuine = 3.4L)
- Intake pipe diameter: φ43 → φ45 tapered (genuine = φ45)
- Intake pipe length: 73.8mm (genuine = 48.5mm)
- Material and manufacturing method: Aluminum casting
- Included emblem (first generation NISMO logo)
- Silver (base) + Black (logo) x 1
- Silver (base) + Blue (logo) x 1
- Size: 25 x 100 mm
- Material: Stainless steel
- Tape fastening type
-
- Genuine: Top Secret
- Material: CFRP (Carbon)
- Type: G-Force
- Often lead time is about ~26 weeks from ordering
-
- Genuine Fujitsubo
- Pipe diameter: 42.7φ-50.8φ-70.0φ
- Maximum output: 134.4kw(182.8ps)/6520rpm
- Volume idling: 67dB
- Proximity exhaust noise (4800rpm): 88.dB
-
- Leadtime: ~3 month from ordering
- Genuine BN Sports
- Kit contains: - Front bumper - Sideskirts - Rear bumper
- Material: FRP Fiberglass
-
- Genuine Tomei
- Gearing: 3.692
- For front and rear differential
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment: - Front: 30 steps - Rear: 30 steps
- Spring rate: - Front: 22.0 kgf/mm (216 N/mm) - Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate: - Front: 19.8 kgf/mm - Rear: 19.8 kgf/mm
- Free length: - Front: 170mm - Rear: 200mm
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: CFRP
- Standard factory bonnet weight: 12.6kg
- Varis carbon bonnet weight: 9.7kg
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 16kgf/mm H200mm – Rear: 10kgf/mm H250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 40mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine Muse Concept Design
- Material Dry Carbon
- RAW Dry Carbon requires top clear coating or painting
- Original Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine T & E VERTEX
- Full Kit (6. pcs kit)
- 50mm widebody
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 90 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 30mm down – Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.6KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
- Kit contains: - FRP Front bumper w/Carbon spoiler lip (2 pcs.) - FRP Sideskirts w/Carbon under panel (4 pcs.) - FRP Rear bumper and rear side addons w/Carbon under panel (4 pcs.)
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
