Skip to content
-
- Genuine 326PoWER
- Avaliable in 3 colours
- Compatible with all S15 models
-
- Genuine Aero Tech
- Lead time 3-4 weeks from ordering
-
- Genuine Aero Tech Japan
- Kit includes:
- Front bumper
- Side skirts
- Rear bumper
- Optional:
- 1pcs Rear wing
- FRP eye line
-
- Genuine Apexi
- Set indluding hand controller (FC Commander)
- Automatic transmission
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BNR34 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine AutoSelect
- Material: Fiberglass (FRP)
-
- Genuine Beat-Sonic
- Type: SLA-70
- For vehicles with Toyota Super Live Sound
- Not compatible with vehicles with Electro Multi-Vision (EMV).
- For genuine connector with 15 or 14Pin (Single connector)
- For replacement of genuine headunit/system to aftermarket 1DIN or 2DIN
-
- Gebuine Wise Square
- Highly durable material
- Original polycarbonate product
- Lens surface is heat coeated
- Original Nissan butyl rubber is included for installation
- Comes as a set of two (left and right)
-
-
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Core size: 266 x 610 x 68mm
- Core type: Tube type
- Complete kit comes with all hardware required for installation.
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level:
- OEM: 86
- NÜR SPEC-R: 99
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level:
– OEM: 87
– NÜR SPEC-R: 94
-
- Genuine BLITZ
- Filter colors avaliable: Blue and red
-
- Genuine BN Sports
- Material: FRP Fiberglass
-
- Leadtime: ~3 month from ordering
- Genuine BN Sports
- Kit contains:
- Front bumper
- Sideskirts
- Rear bumper
- Material: FRP Fiberglass
-
- Genuine BOMEX
- Fog and indicator -lights is not included.
-
-
-
- Genuine BOMEX
- Set for left and right side
-
- Genuine BOMEX
- Set of left and right sideskirt
-
- Genuine BRIDE
- Type: MO
- Passenger side (Left hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
- Genuine BRIDE
- Type: MO
- Drivers side (Right hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
-
- Genuine Chiyoda CGC
- Made in Japan
- Set of left and right taillight lens
- OEM look
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Clear crystal glass
-
- Genuine Clear World
- Including bulbs
- Set of left and right corner lens
- Type: Smoked crystal clear glass
-
- Genuine Craft Square
- Material: Aluminium/Carbon
- Blue lens is avaliable as optional
- Weight: 430g pr. mirror
- Lead time: ~7-8 month from ordering
-
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 30mm (std. 26.5mm)
- Ratio: 160%
- Color: Blue
- Position: Front
- Including bushes
-
- Genuine Cusco
- Material: Steel
- Outerdiameter: 21mm
- Ratio: 131%
- Color: Blue
- Position: Rear
- Including bushes
-
- Genuine D-Max
- Material: FRP (Fiberglass)
- Type: D1Spec
- Width: 30mm wider than stock fenders
- Avaliable as replacement only left or right, if needed.
- Price is for a SET Left + Right side
-
- Genuine D-Max
- Includes mall
- Replacement headlight covers for S15 headlights
- Set of covers for left and right headlight
- Do NOT wipe the covers with a dry cloth only as it's easily scratches.
-
- Genuine D-Max
- Replacement headlamps
- OE style headlamps
- Housing color: Black
- Low beam bulb: H1 (12V 55W)
- High beam bulb: HB3 (12V 65W)
- For models with halogen headlamps
- For HID vehicles, you need conversion heaness kit to convert your car in to Halogen (Genuine HID bulbs can't be installed in these headlights)
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Skyline with 4POT calipers (ER34 GT-Turbo and GT-V Non Turbo)
- Set of two discs
-
- Genuine DIXCEL
- Type SD
- 6 Slits
- Set of two discs
-
- Genuine Do-Luck
- Adjustable cross bar
- Plated steel
-
- Genuine Fujitsubo
- Pipe diameter: 60.5
- Outlet shape: φ90 slash (12°･RL)
- Weight: 17.6
- Volume idling: 67dB (68dB)
- Prox exhaust noise at 5.250rpm: 95dB (97dB)
- 3000rpm: 83dB (84dB)
- 5000rpm: 95dB (96dB)
- 4000~6000rpm: 103dB (101dB)
-
- Genuine Fujitsubo
- Outlet shape: φ101.6 slash (8°)
- Pipe diameter: 60.5φ
- Maximum output: 124.7kw (169.6ps)/6910rpm
- Maximum torque: 187.2N･m(19.1kg･m)/4990rpm
- Muffler weight: 9.9kg
- Volume idling: 69dB
- Proximity exhaust noise (5700rpm): 89dB
- LEAD TIME: Made-to-order ~1 month
-
- Genuine Fujitsubo
- Model: Legalis R
- JAN Code: 4944997715836
- Outlet shape: 117mm round lash II
- Pipe diameter: 76.3mm
- Muffler weight: 13.8kg (STD: 17.8kg)
- Idling volume: 66dB (STD: 62dB)
- Proximately Exhaust volume at 4,800rpm: 90dB (STD: 88dB)
- Burned gradiation tailtip is avaliable
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Kagotani
- Material: Carbon
- Set of left and right louver
- For GK front fenders
-
- Genuine Kagotani Garage
- Material: Fiberglass
- Set of left and right fender
- NOTE! Carbon louvers is not inculded, these has to be ordered seperately.
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
-
- Genuine HighWorks
- Material: Fiberglass (FRP)
- Mounting by double-sided tape or adhesive
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Only avaliable as long as we have stock!
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Type: HIPERMAX R
- Cannot be installed on vehicles equipped with REAS (Can be installed by removing the hydraulic system)
- Upper mount: Pilo
- Damping force adjustment:
- Front: 30 steps
- Rear: 30 steps
- Spring rate:
- Front: 22.0 kgf/mm (216 N/mm)
- Rear: 16.0 kgf/mm (157 N/mm)
- Helper spring rate:
- Front: 19.8 kgf/mm
- Rear: 19.8 kgf/mm
- Free length:
- Front: 170mm
- Rear: 200mm
-
- Genuine HKS
- S-Series
- Spring rate: F=98(10)/R=78(8)
- Free length: 200/220(Barrel)
- Standard setting:
F: -41(0 - -55)
R: -34(0 - -83)
- Daming force adjustment: 30 levels (Front and Rear)
- Upper Mount: Rubber
- Helper spring: Yes (19.8 N/mm)
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side
- Side steps
- Rear under spoilers
- Under spoilers fits factory rear bumper
-
- Genuine HKS
- Clutch type: Single disk
- Method: Push
- Flywheel weight: 7.2kg (stock flywheel 12.3kg)
- Clutch capacity: 800Nm (178% compared to stock)
- Treading force: 221N (170% compared to stock)
- Bolt On Design (all hardware required is included)
- Repair parts avaliable
-
- Genuine HKS
- Location: Left side, behind bumper
- Core size: 200 x 220 x 48 (15 Row)
- Hose size: #10
- Adapter Thermo: M12×P1.25 (1 hole), PT1/8 (1 hole)
- - Thermostat valve operation start temperature 70°C (±3°C)
- Thermostat valve fully closed temperature 80°C (±3°C)
- Includes oil filter relocation
-
- Genuine HKS
- Size (mm): 200-100
- Filter Color: Red (2-layer polyurethane form)
- Replacement filter element: 70001-AK032
- Only for Turbo Vehicles
- NOTE! JZA80: Not Compatible with VVT-i Vehicles
- NOTE! Cannot be mounted in combination with HKS Super SQV
-
- Genuine HKS
- Power up to a maximum of 1.6 times the secondary voltage compared to the genuine product. A strong spark prevents misfires in the high rotation range.
- The bracket is anodized to ensure beauty and durability.
- Highly durable and high performance ignition coil made in Japan.
- Deteriorated harnesses can be refreshed using a dedicated harness.
- Easy to install with specially designed bracket and harness.
- NOTE! Carbon timingbelt cover is not included in this set - Please purchase seperate!
-
- Genuine HKS
- Part no. 31029-AN003
- SSR (Super Turbo Muffler)
- Material: S304 Stainless steel
- Tail outer diameter: 124mm
- Main pipe diameter: 85
- Exhaust noise:
- STD: 95dB
- HKS: 94dB
- Used/Second hand product
- Really good condition, please judge by photos
- Including original documents
-
- Genuine Honda
- Required qty. per car: 1 pcs.
-
-
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- J-Pipe delete system
- Cotton filter included
- Includes all hardware needed for installation
-
- Genuine HPI
- Made in Japan
- Specification: Φ80
- Stainless Steel
- J-Pipe delete system
- Stainless filter included
- Includes all hardware needed for installation
-
- Genuin HPI
- Type: Evolve
- Aluminium radiator
- Core size: 57mm
- STD series
- Compatible with MT and AT models
-
- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed.
- Repair parts for old and new type is avaliable.
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed.
- Repair parts for old and new type is avaliable.
-
- Genuine Jura Tec
- Carbon Fiber
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine JURAN
- Left side (Passenger Side)
- Type: T100
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine JURAN
- Right side (Driver Side)
- Type: T099
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine K.Break
- Material: Fiberglass (FRP)
-
- LEAD TIME: 2-3 months from ordering
- Genuine Kazama Auto
- Made of FRP (Fiberglass reinforcement plastic)
- GT-R racing look front grill
- Including mesh
-
- Genuine Kazama Auto
- Type: Promode
- Material: FRP Fiberglass
-
- Genuine Kazama Auto
- Material: Fiberglass
- Set of left and right
- Lead time: ~ 3 month from ordering
-
- Genuine KOYO
- Toyota OEM no. 90369-49002
-
- Genuine KOYORAD
- Aluminium condenser
- Core size: 670 × 370 × 16
- OEM No. 88460-22560
-
- Genuine KOYORAD
- Genuine replacement
-
- Genuine KOYORAD
- Type: Type R
- Material: Copper
- Core layer: 3
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine LAILE
- Material: Aluminium
- Material thickness: 1.2mm
- Weight: 0.280kg
-
- Genuine LAILE
- Material: Aluminium
- Material thickness: 2.0mm
- Weight: 3.3kg
- Bolt On with genuine radiator
-
- Genuine Mitsubishi
- Code: 46023
- Required qty. per car: 2 pcs
- Fits right and left side
- Old part number: MB350581
Page load link
