- Genuine Nissan
- Code: 84807
- Required qty. per car: 2
- Old part number: 84840-AA110
-
-
- Genuine Nissan
- Code: 84807+A
- Required qty. per car: 2
- Old part number: 84840-AA105
-
- Genuine Nissan
- Code: 84807+B
- Required qty. per car: 2
-
- Genuine Nissan
- Fits RH+LH
- Reqired qty. per car: 2 pcs
- Replaces: 84431-AA400 / 84430-AA400
-
- Genuine Nissan
- Code: 27441
- Required qty. per car: 2 pcs.
- Replaces OLD part no.: 28931-80F00, B8930-50Y00
-
- OE Parts
- Timingbelt
- Tensioner
- Waterpump
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: - Front: 16kgf/mm H200mm φ65 - Rear: 12kgf/mm H200mm φ65
- Standard vehicle geight (genuine ratio) - Front: About 30mm down - Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) - Front: ±15mm - Rear: ±15mm
-
- Genuine Okada Projects
- Type: Plasma Direct (D)
- Contains 6 ignition coilpaks
- Plug'n'Play installation
- For normal boost (under 1.8kg/cm2)
-
- Genuine Okuyama Carbing
- Material: Aluminium
-
- Genuine Okuyama Carbing
- Material: Carbon fiber
-
- Genuine ORC
- System: Push type
- With spring dampers
- Discs: Single
- Disc Outer Diameter: 200mm
- Torque response Nm (kgfm): 340(35)
- Kit includes: - Clutch cover - Clutch disc - Flywheel - Flywheels bolts - Release bearing - Pilot bearing
-
- Genuine Origin Labo
- Material: Carbon fiber
- Type: Ver.2
-
- Genuine PITWORK / Nissan
- Code: 13070M
- Required qty. per car: 1 pcs
-
- Genuine Rasty
- Plug including o-seal, lock and bolt
- Made of aluminium
-
- Genuine REIMAX
- 150 cells x 2
- Flange diameter: 80mm
- Main diameter: 110mm
- Material: SUS304 Stainless Steel
-
- Genuine Revolfe S.A.
- Kit includes: - 3 blue silicone hoses - 6 stainless steel hose bands
-
- Genuine RS-R
- Series: Ti2000 DOWN
- Lowering: – Front: 35~40mm – Rear: 20~25mm
- Spring rate: – Front: 8.33kg/mm – Rear: 4.20kg/mm
- Spring color: Black
- JAN Code: 227880
- Avaliable as seperate front and rear set
-
Out of stock
- Genuine Real Speed Engineering
- Full titanium
- Weight: – RSE: 6.0kg – OEM: 17.7kg – Redusing: 11.7kg
- Main pipe diameter: 76.3-101.6mm
- Main pipe thickness: 1.0mm
- Silencer diameter: 152mm
- Silencer thickness: 1.0mm
- Outlet diameter: 115mm
- Outlet thickness: 1.0mm
- Flange thickness: 8.0mm
-
- Genuine SONAR
- Version 1
- Bulb winker
- LED light/brakelight
- Bulb reverse light
- Black housing
- Smoked cover
-
- Genuine Spoon Sports
- Made in Japan
- For street and track use
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP)
- Finish: White gelcoate
- 13pieces fender kit - Front fenders (4 pcs) - Rear fenders (8 pcs) - Fuel lid (1 pcs)
