- Genuine Nissan
-
- ONLY 1 IN STOCK!
- Genuine Nismo
- Type: 05U
- Old Nissan number: 11000-05U00
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Nissan
- Code: 49726
- Required qty. depending on model minimum: 2 pcs.
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine DIXCEL
- Set for left and right side
- RGM type
- Genuine replacement sidebrake inner drum shoes
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won’t be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nismo
- Including all hardware needed for installation
- Blow by gases won't be released in to the atmosphere
- Great for vehicle inspection
- Catches the blowback oil that normally will end in the intercooler or in the MAF
- Made of aluminium
-
- Genuine Nissan
- For series-2 BNR34 08/2000-
- Compatible with series-1 BNR34's 01/1999-
- Thread type: M12
-
Out of stock
- Genuine Nismo
- Aluminium
- Complete kit with installation hardware
- Better and quicker response
-
- Genuine TOMEI
- Chrome Moly Alloy (SCM435)
- Up to 10,000 RPM
- M6 P1.00
- Contents: - Bolt x 28 - Nut x 28
-
- Genuine Nissan
- Code: 49310A
- Required qty. depending on model minimum: 1 pcs.
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine Nismo
- Nissan OEM no.: 49710-05U07
- Qty per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine Nismo
- Nissan OEM no.: 65810-83L00
- Qty. per car: 1
- Code: Q
- Fits: BNR32 1989/05-
-
- Genuine SARD
- Fitting: 8mm
- Color: Gold
- REMARK: Cannot be used with genuine injectors.
-
- Genuine Nismo
- Printed with little Nismo logo
- Dry-carbon material
- Installed with double sided tape
- Plug'n'Play install
-
- Genuine Jura Tec
- Kit contains: - Caliper brackts (LH+RH) - Bolts and hardware for installation - Special made genuine drum shoe set (LH+RH) to fit R35 GT-R brake drum bell **All shown in the photo
-
- Genuine Garage Active
- Material: Carbon
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
-
- Genuine Garage Active
- Material: FRP (Fiberglass)
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
- NOTE! Photo shows the carbon verion, this actual product is the FRP version
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine Jura Tec
- Set of left and right brake drum shoe
- Special made for R35 brake drum (when installing R35 GT-R Brakes on BNR34 and BCNR33 Skyline)
-
- Genuine Muse Concept Design
- Replacement inserts for your OEM R34 GT-R Seats
- 1 Pair (purchase 2 pairs if you need for both seats)
- Material ABS Plastic
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material ABS Plastic
- High quality replacement in satin black
- Compatible with all R34 Skylines
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS Plastic wrapped in Alcantara
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pillar Set includes A, B/C pillars (Both Sides)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R34 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Nappa Leather and Alcantara
- D-Shape Design
- Available in Grey and Red stitching
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Weight approx 200g
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 1.1mm thick polished titanium plate
- Lightweight Design
- Precision Fit (Easy install, no modifications needed).
- High-Strength Titanium alloy to enhance vehicle cooling performance and overall power output
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon with 5mm Honeycomb Core Layer
- Featuring the N1-Style Air Vent Design
- Weight approx 5kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- OEM Wing Blade fit and finish, just carbon!
- Weight approx 690 grams
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Wing Blade and Wing Stay are sold separately
- Weight approx 2kg
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- 100mm taller than the original wing stay, reduces weight improves downforce
- Weight approx 400g per side
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Front Undertray has been treated with high gloss clear coating. Wing stand does not have a surface clear coat
- Extra 20mm lip provides a more sporty look
- Designed to be a complete plug and play replacement
- Weight approx 3.5KG
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.6KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- RAW Dry Carbon requires top clear coating or painting
- Original Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Plug-and-play installation, no wiring modifications required, connects directly to the factory cigarette lighter harness
- 1 Type C and 1 USB Charger outputs
- Can be directly inserted into the factory expansion slot of R33 and R34 models
- For installation in the Center Armrest of R32, R33, or R34, a cutout is required, a cutout template is included for easy installation
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R32 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left rear brake caliper
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left front brake caliper
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55157-RS580
-
- Genuine Nismo
- Comes as set for left and right side.
- Repair bush avaliable: 55045-RS580
-
- Genuine Nissan
- For left side
- Code: 62673P
-
- Genuine Nissan
- For left side
- Code: 62674P
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of B Pillar Seatbelt Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Cap
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Switch Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Wiper Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster lower cover trim
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster cover panel
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS (Textured)
- Top Mounting Cover and Sensor Cover
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- Dashboard Defrost Vents Left and Right
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right vent
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 2 Pieces that clicks into one
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Authentic Original Style Design
- Made of ABS with 1:1 top vinyl
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of Dry Carbon
- Weight 135g per side
- Comes as a pair of left and right brake duct
- Reducing weight and increase structural strength
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- High Performance 89MM High Flow Catalytic Converter
- Weight 1.3KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 89MM Test Pipe
- Weight 600g
- Simple solution to eliminate exhaust restriction in GT-R exhaust systems
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- Titanium Front Y Pipe
- Pipe Size φ70 x2 -φ89
- Even Length Type
- Weight 2.7KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- 89 to 102MM Catback
- Material Titanium
- Main Pipe φ89 Internal
- Exhaust Muffler Diameter φ102 Internal
- Weight 7.5KG
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
