- Genuine Nissan
- Code:
- Required qty. per car: 1 pcs.
-
-
- Genuine Nissan
- Code: 96017F
- Required qty. per car: 1 pcs
- Rubber seal end only (for replacement)
-
- Genuine Nissan
- For left side
- Code: 62673P
-
- Genuine Nissan
- For left side
- Code: 62674P
-
- Genuine Nissan
- Code: 72616
- Reqired qty. per car: 1 pcs
- Old part number: G2716-89900
-
- Genuine Nissan
- Code: 72717
- Reqired qty. per car: 1 pcs
-
- Genuine Nissan
- Code: 72811
- Reqired qty. per car: 1 pcs
-
- Genuine Nissan
- Code: 49725MD
-
- Genuine Nissan
- Part Code: 44217A
- Required qty. per car: 2 pcs
- Price is listed per clip
-
- Genuine Nissan
- Code: 92425
- Required qty. per car: 1 pcs
-
- Genuine Nissan
- Price is listes as per pcs.
- Required qty pr. car: 2 pcs
-
- Genuine Nissan
- Code: 79616
- Reqired qty. per car: 1 pcs
- Old part number: G2716-89901
-
- Genuine Nissan
- Code: 79816
- Reqired qty. per car: 1 pcs
-
- Genuine Nissan
- Set of two visors (left and right)
-
- Genuine Nissan
- Code: 84807
- Required qty. per car: 2
- Old part number: 84840-AA110
-
- Genuine Nissan
- Code: 84807+A
- Required qty. per car: 2
- Old part number: 84840-AA105
-
- Genuine Nissan
- Code: 84807+B
- Required qty. per car: 2
-
- Genuine Nissan
- Fits RH+LH
- Reqired qty. per car: 2 pcs
- Replaces: 84431-AA400 / 84430-AA400
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left front brake caliper
-
- Genuine Nissan / PITWORK
- Comes as a set for right and left rear brake caliper
-
- OE Products
- Made in Japan
- Complete timingbelt replacement set
- Timingbelt
- Waterpump
- Idler + tensioner
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: PN/PN (Pillow Ball Mount)
- Main spring: – Front: 90 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 30mm down – Rear : About 30mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Öhlins
- Made in Japan (Developed by Öhlins Japan)
- Type: HAL
- Upper mount type: RN/RN (Rubber Mount)
- Main spring: – Front: 100 N/mm / 200mm – Rear: 80 N/mm / 250mm
- Standard vehicle geight (genuine ratio) – Front: About 40mm down – Rear : About 25mm down
- Vehicle height adjustment range (compared to standard setup) – Front: ±15mm – Rear: ±15mm
-
- Genuine Okada Projects
- Type: Plasma Direct (D)
- Contains 6 ignition coilpaks
- Plug'n'Play installation
- For normal boost (under 1.8kg/cm2)
-
- Genuine PITWORK / Nissan
- Code: 13070M
- Required qty. per car: 1 pcs
-
- Genuine REIMAX
- Main diameter: 65 x 2 (flange inner diameter 70mm) - 80mm
- Material: SUS304 Stainless Steel
-
- Genuine REIMAX
- Main diameter: 80mm
- Exit diameter: 2 x 80mm
- Material: SUS304 Stainless Steel
- Approx 96db
-
- Genuine REIMAX
- 150 cells x 2
- Flange diameter: 80mm
- Main diameter: 110mm
- Material: SUS304 Stainless Steel
-
- Genuine SARD
- Fitting: 8mm
- Color: Gold
- REMARK: Cannot be used with genuine injectors.
-
- Genuine Seiken
- OEM Part no. 39741-05U26 / 39741-05U28 / 39741-05U89
-
- Genuine Seiken
- OEM Part no. 39741-05U25 / 39741-05U29
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
When installing a aftermarket sports steering, you will experience that your airbag lamp will show up and stay on, as the car has detected an error on your airbag system. This canceller will plug in to the connector where you airbag was, and trick the system to believed that the airbag is working and still connected. PLEASE NOTE! You have removed the airbag and the airbags in the car may not work at all.. this is just to trick and turn off the lamp in the dash.
- One touch type
- Yellow coloring for showing airbag related
- Plug'n'Play connector system
- No cutting or modifying needed
- ONLY FOR OFF ROAD USE!
-
- Genuine Tomei
- Gearing: 3.692
- For front and rear differential
-
- Genuine TOMEI
- M32-P3.5
- Diameter: 62mm / Height: 29mm
- Aluminium (A5056)
- Black anodized
- TOMEI logo
- Elegant and beautiful surface finish.
-
- Genuine TOMEI
- SUS316 Full Cast
- Exit diameter: ~66mm
- Volume: 800cc / 900cc
- Pipe thickness: ~2.8mm
- Flange thickness: ~11mm
- Weight: 1.85kg / 2.10kg
-
- Genuine TOMEI
- Chrome Moly Alloy (SCM435)
- Up to 10,000 RPM
- M6 P1.00
- Contents: - Bolt x 28 - Nut x 28
-
- Genuine TOMEI
- Material: Titanium (Stainless steel)
- Main pipe dia: Φ70×2-Φ80 (Φ60×2-Φ70)
- Pipe thickness: 1 mm (2 mm
- Flange thickness: 8 mm (8 mm)
- Weight: 2.4 kg (5.6 kg) (Weight reduce 3.2 kg)
- (STANDARD PART)
-
- Genuine Top Secret
- Materials: Carbon
- Replaces the OE front diffuser/undercover
- Slightly bigger shape than OE, delivers bigger downforce
