Skip to content
-
- Genuine Toyota
- Code:
- Compatible with various models
-
- Genuine Toyota
- Code: 75533
- Required qty. pr. car. 1 pcs
-
- Genuine Toyota
- Color code: 057
-
- Genuine SuperMade
- Only headlight conversion frames
- Lights are not included
- Material: Fiberglass FRP
-
- TAKERO'S
- Material: Fiberglass (FRP)
- Front spoiler lip is not included, but can be ordered separately.
- Front bumper lamps is not included, but can be ordered seperately.
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine Toyota
- Price is pr. set
- Required pr. car: 1 set (1 set contains repair seals for right and left rear brake caliper)
-
-
- Genuine Nissan
- Replacement for 40232-33P55 (discontinued)
-
-
- Genuine Varis
- Material: Dry Carbon VSDC
- 5kg lighter than OEM
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Genuine Varis
- Material: Carbon
- 3kg lighter than OEM
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Clear coat finish
- Often lead time is about ~26 weeks from ordering
-
- Genuine Varis
- Material: Fiberglass
- Type: Fiberglass
- Set includes Left and Right
- 20mm wider on each side
- Often lead time is about ~26 weeks from ordering
-
- Genuine Varis
- Material: Carbon & Fiberglass
- Type: CFRP+FRP
- Set includes Left and Right
- 20mm wider on each side
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Material: Carbon
- Only includes: Front Bumper Canards
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Bumper (FRP), Front Lip (CARBON)
- The kit does not include the genuine daylight kit. If you need it, please order it separately.
- Canards not included. Can be purchased here: Varis Front Bumper Canards Ver. 3 R35 GT-R
- Included: Carbon Lip, Daylight Cover, FRP Bumper Body, Under Panel
- Original GT-R emblem and genuine daylight components can be used
- Carbon products come gel coated, it is recommended to apply a UV resistant PPF or clear coat for durability and appearance
- Often lead time is about ~26 weeks from ordering
-
- Genuine BLITZ
- Lightweight all-aluminum radiator realizing low price of threat by adopting new core and reviewing manufacturing method.
- A 42 mm thick core and a large capacity tank realize substantial heat capacity increase.
- Design that can install genuine electric fan and fan shroud. (Depending on the model, processing may be necessary for mounting).
- Buff finish on tank, quality is a commitment at a low price.
- Convenient to take out the water temperature sensor, with 1 / 8PT service hall.
- Adopting a new type of outer fin to enhance heat dissipation.
- Designed exclusively for each type of vehicle, adopting different tube pitches depending on the model.
- Alumite finished drain bolt and BLITZ original radiator cap are standard equipment.
-
-
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine KOYORAD
- Type: Type-F
- Material: Aluminium
- 2-Layer
- Color: Aluminium (Buffed)
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine Kondo Engineering Takumi Project
- Variant: MIYABI. The MIYABI variant is made of carbon and fiberglass.
Carbon fiber front with Clear Coating and raw fiberglass back
- Material Carbon and Fiberglass (CFRP-FRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: TAKUMI. The TAKUMI variant is made of carbon.
Carbon fiber front with Clear Coating and raw carbon fiber back
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takumi Project
- Variant: KIWAMI. The KIWAMI variant is made of carbon.
Carbon fiber front and back with clear coating
- Material Carbon (CFRP)
- Upper piece
- Not compatible with vehicles equipped with the S208 under spoiler.
- Cannot be installed on under spoilers for the S207 and VAG tS.
-
- Genuine Kondo Engineering Takami Project
- Fits Toyota GR86 & Subaru BRZ (non-brembo)
- Sport Spec with a temperature range of 0°C to 750°C
- With this item you are purchasing the front brake pads
-
- Genuine Kondo Engineering Takami Project
- Fits Subaru WRX S4/LEVORG (non-brembo)
- Sport Spec with a temperature range of 0°C to 550°C
- With this item you are purchasing the front brake pads
-
- Genuine Muse Concept Design
- Made of ABS Plastic wrapped in Alcantara
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pillar Set includes A, B/C pillars (Both Sides)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Titanium
- 1.1mm thick polished titanium plate
- Lightweight Design
- Precision Fit (Easy install, no modifications needed).
- High-Strength Titanium alloy to enhance vehicle cooling performance and overall power output
- Often lead time is about ~8 weeks from ordering
Page load link
