- Genuine Beat-Sonic
- Type: SLA-70
- For vehicles with Toyota Super Live Sound
- Not compatible with vehicles with Electro Multi-Vision (EMV).
- For genuine connector with 15 or 14Pin (Single connector)
- For replacement of genuine headunit/system to aftermarket 1DIN or 2DIN
-
-
- Genuine BRIDE
- No seat heater
- Charcoal Gray color
- Flame retardant fabric
- Weight: 14.6kg
- Seat rail is not included
-
- Genuine BRIDE
- Set includes: front and rear floor mats (4 pcs. set)
- Gradiation BRIDE fabric
-
- Genuine BRIDE
- Type: MO
- Passenger side (Left hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
- Genuine BRIDE
- Type: MO
- Drivers side (Right hand)
- Material: Steel
- Seat mounting dimensions / length: 330mm x breadth: 290mm, length: 271mm x breadth: 345mm
-
Made in Japan
-
- Aftermarket installation part
- Plugs into factory connector
- Universal application to any aftermarket stereo installation
- Hijet Deck Van Hijet Cargo S510P S510U S510J S710W S331W
-
- Genuine Daihatsu
- Complete set as shown on the photo
-
- Genuine Daihatsu
- Complete set as shown on the photo
-
- Daihatsu OEM original parts
- Complete set as snown on the photos
-
- Genuine Defi
- Lighting color: Blue
- Meter diameter: 60mm
-
- Genuine Defi
- Lighting color: Blue
- Meter diameter: 60mm
-
- Genuine Defi
- Lighting color: Blue
- Meter diameter: 60mm
-
- Genuine Defi
- Lighting color: Blue
- Meter diameter: 60mm
-
- Genuine Defi
- Lighting color: Blue
- Meter diameter: 60mm
-
- Genuine Defi
- ADVANCE system
- Required for ADVANC series meter/display operation
- Switch unit included
- Indicator output
- Driving data recording/driving data playback
- Lighting ON/OFF: Vehicle illumination SW interlocking
- Lighting color: White (switch part)
- Dedicated mounting base included
-
- Genuine Defi
- ADVANCE FD
- Defi-Link ADVANCE system
- 2.5-inch full-color TFT screen, high brightness
- Uses low-reflection glass that maximizes visibility of color TFT
- Uses a separate switch that can be mounted on either the left or right side, improving operability when wearing a full harness seat belt
- Dedicated mounting stay included
- ADVANCE control unis is required and sold sepearately
-
- Genuine Garage Active
- Material: Carbon
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
-
- Genuine Garage Active
- Material: FRP (Fiberglass)
- Kit contains: - Rear seat (upper part) - Rear seat (lower part) - Speaker board
- NOTE! Photo shows the carbon verion, this actual product is the FRP version
-
- PRE-ORDER – order period ends 28.th of december
- Delivery will start from around July 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Only avaliable as long as we have stock!
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
Out of stock
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- Limited Edition
-
Out of stock
- Genuine HKS / Genuine BRIDE
- Limited Edition
- Reclining Seat (Semi-bucket seat)
- Stradia III
- Black with BRIDE Gradiation
- HKS Oil color stitching'
- HKS Logo on the front
- "Tune the next" embroded logo on the front
- BRIDE logo on the back
- Shell material: Fiberglass (FRP)
-
Out of stock
- Genuine HKS / Genuine NARDI
- 50th Anniversary
- Limited Edition
- Material: Punching Leather
- HKS oil color stitching
- HKS oil color horn button
- Size: 340mm
- 3-Spoke (Black)
-
- PRE-ORDER IS OPEN NOW
- Delivery will start from about august 2025 (we can't tell exact when your order will be delivered)
- Genuine HKS x Worksbell
- Comes with security lock set with keys and protection bag for when the locking is not in use.
- HKS Oil Color theme
- Black annodized aluminiuum
- Material: A6061 Aluminium
-
- Genuine JDM Tsurikawa
- Kimono pattern
- Authentic fabric
- Made in Japan
- Length: 220 cm
- Width: 260 cm
- Top Ring: 16mm
-
- Genuine JDM Tsurikawa
- Kimono pattern
- Authentic fabric
- Made in Japan
- Length: 220 cm
- Width: 260 cm
- Top Ring: 16mm
-
- Genuine JDM Tsurikawa
- Kimono pattern
- Authentic fabric
- Made in Japan
- Length: 220 cm
- Width: 260 cm
- Top Ring: 16mm
-
- Genuine JDM Tsurikawa
- Kimono pattern
- Authentic fabric
- Made in Japan
- Length: 220 cm
- Width: 260 cm
- Top Ring: 16mm
-
- Genuine JDM Tsurikawa
- Nishijin-ori textile luxury fabric made in Kyoto
- Made in Japan
- Length: 220 cm
- Width: 260 cm
- Top Ring: 16mm
-
- Genuine JDM Tsurikawa
- Kimono pattern
- Authentic fabric
- Made in Japan
- Length: 220 cm
- Width: 260 cm
- Top Ring: 16mm
-
- Ganuine JULIUS
- Material: Carbon / Matt finish
- Installation tape included
-
- Genuine JUNCTION PRODUCE
- Made in Japan
- Color: Beige
- Size: - Curtain body size: (approx.) W500 x H420 (mm) - Window frame height: (approx.) 370-470 (mm)
- Logo Color: Beige emobroded logo
- Curtain rails for top and bottom (500mm)
- Curtain belts is included (Optional belt/logo colours is avaliable for purchase seperately!)
-
- Genuine JUNCTION PRODUCE
- Made in Japan
- Color: Black
- Size: - Curtain body size: (approx.) W500 x H420 (mm) - Window frame height: (approx.) 370-470 (mm)
- Logo Color: Silver emobroded logo
- Curtain rails for top and bottom (500mm)
- Curtain belts is included (Optional belt/logo colours is avaliable for purchase seperately!)
-
- Genuine JURAN
- For SR Type seat rail
- For genuine Lancer Evolution seats 7, 8, 9
- One set is needed per seat
-
- Genuine JURAN
- Type: SJ
- Set for left and right seat rail
- Front and rear 295 mm x Left and right 405 mm
- STYLE / SPORT / TREND (AM19 series manual model)
- Please use seat rail S typp + SJ adapter
- This set is for one seat, so if you net for a set of seats, please order two sets of adapters.
-
- Genuine JURAN
- Left side (Passenger Side)
- Type: T100
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine JURAN
- Right side (Driver Side)
- Type: T099
- Not compatible with 4WD models
- Lower compared to genuine seat: ~30mm
-
- Genuine KEY'S Racing
- Material: Suede
- Type: Original (07y)
- Size: 350mm
- Style: Semi Deep
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R32 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R34 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Dry Carbon
- Weight approx 200g
- RAW Dry Carbon requires top clear coating or painting
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- Satin Black, Smooth Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Includes Main Trim Panel and Gear Surrounding Panel
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Plug-and-play installation, no wiring modifications required, connects directly to the factory cigarette lighter harness
- 1 Type C and 1 USB Charger outputs
- Can be directly inserted into the factory expansion slot of R33 and R34 models
- For installation in the Center Armrest of R32, R33, or R34, a cutout is required, a cutout template is included for easy installation
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Authentic Original Style Design
- Made of ABS with 1:1 top vinyl
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster cover panel
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- This is only the dashboard cluster lower cover trim
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- Dashboard Defrost Vents Left and Right
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right vent
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 2 Pieces that clicks into one
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS (Textured)
- Top Mounting Cover and Sensor Cover
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Comes as a pair of left and right cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Replacement inserts for your OEM R34 GT-R Seats
- 1 Pair (purchase 2 pairs if you need for both seats)
- Material ABS Plastic
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Nappa Leather and Alcantara
- D-Shape Design
- Available in Grey and Red stitching
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Installed by removing your current rear seat skin from its foam core and applying the new MUSE V-Spec II seat skin.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Control Switch
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Headlight Switch Light Cover
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Ignition Trim Cover
- Often lead time is about ~8 weeks from ordering
