Skip to content
-
-
-
- Genuine HKS
- Core size: 200 x 220 x 48.5/15
- Core mounting position: Inside left fender
-
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Belt size: 4PK880
-
- Genuine HKS
- Belt size: 4PK910
-
- Genuine HKS
- Belt size: 4PK925
-
-
-
-
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side
- Side steps
- Rear under spoilers
- Under spoilers fits factory rear bumper
-
- ETA: Unknown (2023-6/9)
- Genuine HKS Kansai Service
- Material: Carbon fiber
-
- Genuine HKS
- Clutch type: Single disk
- Method: Push
- Flywheel weight: 7.2kg (stock flywheel 12.3kg)
- Clutch capacity: 800Nm (178% compared to stock)
- Treading force: 221N (170% compared to stock)
- Bolt On Design (all hardware required is included)
- Repair parts avaliable
-
-
- Genuine HKS
- 88kPa (0.9kg)
- Type: S
-
- Genuine HKS
- 108kPa (1.1kg)
- Type: S
-
-
-
- Genuine HKS
- Part no. 31029-AN003
- SSR (Super Turbo Muffler)
- Material: S304 Stainless steel
- Tail outer diameter: 124mm
- Main pipe diameter: 85
- Exhaust noise:
- STD: 95dB
- HKS: 94dB
- Used/Second hand product
- Really good condition, please judge by photos
- Including original documents
-
- Genuine HKS
- Material: S304 (Stainless steel)
- Tail outer diameter: 124 mm
- Pipe diameter: 85 mm
- Exhaust noise: 97 dB (STD: 95 dB)
-
-
- Genuine Hot Road
- Material: FRP
-
- Genuine Jura Tec
- Carbon Fiber
-
-
- Genuine Jura Tec
- For late model BNR32
-
- Genuine Jura Tec
- For early model BNR32
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Comes as a full kit with all hardware needed for installation (as shown on the photo)
-
- Genuine Jura Tec
- Kit contains:
- Caliper brackts (LH+RH)
- Bolts and hardware for installation
- Special made genuine drum shoe set (LH+RH) to fit R35 GT-R brake drum bell
**All shown in the photo
-
- Genuine Jura Tec
- Set of left and right brake drum shoe
- Special made for R35 brake drum (when installing R35 GT-R Brakes on BNR34 and BCNR33 Skyline)
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Made in Japan
- Genuine leather
- Black leather
- Purple stitching
-
-
-
- Genuine M.Speed
- With top tone (Two tone)
-
- Genuine M.Speed
- Material: FRP
- Set contains front and over rear fenders
- Reference to genuine Kenmeri GT-R
-
- Genuine M.Speed
- Diameter: 220mm
- Mounting hole: 100 x 70mm
-
- Genuine M.Speed
- Set of left and right wheel hub
- Front hubs
- 4 Stud type
-
- Genuine M.Speed
- Material: Steel
- Price is pr. panel
- Can be used for left and right side
- Length: ~120cm
- If out of stock lead time is about 2~3 weeks from ordering.
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY600-NS048
-
- Genuine Miyaco Motors
- OE Product
- Made in Japan
- OEM Quality
- OEM Part no. AY620-NS007
-
- Genuine Muse Concept Design
- Made of ABS/Vinyl Leather
- 1:1 OEM Replacement fit and finish, no adjustments needed
- A pair of A Pillar Interior Trim, Left and Right
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material 3K Dry Carbon Fiber
- RAW Dry Carbon requires top clear coating or painting
- Weight 20g
- Often lead time is about ~8 weeks from ordering
- Compatibility, OEM Aluminum Bonnets for BNR32, BCNR33, BNR34 (cutting & inlay required, template included)
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Heat Resistant Dry Carbon Fiber & Titanium
- Main Pipe: Heat Resistant Dry Carbon
- Connection Part: Heat Resistant Silicone Hoses
- Turbo Outlet Pipe: Titanium
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R32 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Replacement Roof Lining
- Lightweight foam fiber baseboard covered with alcantara
- Compatible with all R34 2-door models
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Compatible with all R32 Skylines
- OEM Fit and Finish
- Often lead time is about ~8 weeks from ordering
-
-
- Genuine Muse Concept Design
- Made of ABS
- 1:1 OEM Replacement fit and finish, no adjustments needed
- 1 Muse Ashtray
- OEM Style, Textured Finish!
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower rear seat completed skins, you will need existing seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 rear seat.
- OEM Nissan Skyline GT-R seat frames and foam base are not included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Material Alcantara
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Includes upper and lower seat cushions, you will need seat base mechanisms/trim to complete this upgrade.
- Compatible with BNR32, BCNR33 and BNR34 seat mechanisms. Will require a professional to do so correctly.
- OEM Nissan Skyline GT-R seat frames and rails are NOT included.
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- Using an OEM ABS base and layered with high-quality dry-carbon we finished these off with a subtle black gradient painted in to blend with the rest of your interior and glass.
- 1:1 OEM Replacement fit and finish, no adjustments needed
- Pair of Inner Mirror Interior Trims - (Includes all fittings and adhesives)
- Often lead time is about ~8 weeks from ordering
-
- Genuine Muse Concept Design
- N1 Style Air Intake
- Material Dry Carbon Fiber with 5mm Honeycomb Core Layer
- RAW Dry Carbon requires top clear coating or painting
- Weight approx 5KG
- Often lead time is about ~8 weeks from ordering
Page load link
