Skip to content
-
- Genuine M.Speed
- Diameter: 220mm
- Mounting hole: 100 x 70mm
-
- Genuine M.Speed
- Material: FRP
- Set contains front and over rear fenders
- Reference to genuine Kenmeri GT-R
-
- Genuine M.Speed
- With top tone (Two tone)
-
-
-
- Made in Japan
- Genuine leather
- Black leather
- Purple stitching
-
- Genuine KTS
- Reinforced tie rods
- Set of left and right rod
- Compatible with Nissan OEM rod ends
- KTS Rod ends avaliable seperately or you can get it as a complete set.
-
- Genuine K-Parts
- Made in Japan
- Style: Type II Twill Weave
- Carbon fibre bonnet with FRP black gelcoat shell
- Reasonabele priced carbon bonnet in good quality and fitment.
- Recommendations: Use hoodpins and do not use hudraulic lifters
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- Made of steel
- Paint is required
-
- Genuine Jura Tec
- For early model BNR32
-
- Genuine Jura Tec
- For late model BNR32
-
-
- Genuine Jura Tec
- Carbon Fiber
-
- Genuine Hot Road
- Material: FRP
-
-
- Genuine HKS
- Material: S304 (Stainless steel)
- Tail outer diameter: 124 mm
- Pipe diameter: 85 mm
- Exhaust noise: 97 dB (STD: 95 dB)
-
- Genuine HKS
- Part no. 31029-AN003
- SSR (Super Turbo Muffler)
- Material: S304 Stainless steel
- Tail outer diameter: 124mm
- Main pipe diameter: 85
- Exhaust noise:
- STD: 95dB
- HKS: 94dB
- Used/Second hand product
- Really good condition, please judge by photos
- Including original documents
-
-
-
- Genuine HKS
- 108kPa (1.1kg)
- Type: S
-
- Genuine HKS
- 88kPa (0.9kg)
- Type: S
-
-
- Genuine HKS
- Clutch type: Single disk
- Method: Push
- Flywheel weight: 7.2kg (stock flywheel 12.3kg)
- Clutch capacity: 800Nm (178% compared to stock)
- Treading force: 221N (170% compared to stock)
- Bolt On Design (all hardware required is included)
- Repair parts avaliable
-
- ETA: Unknown (2023-6/9)
- Genuine HKS Kansai Service
- Material: Carbon fiber
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side
- Side steps
- Rear under spoilers
- Under spoilers fits factory rear bumper
-
-
-
-
-
- Genuine HKS
- Belt size: 4PK925
-
- Genuine HKS
- Belt size: 4PK910
-
- Genuine HKS
- Belt size: 4PK880
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
- Genuine HKS
- Belt size: 141YS25.4
- Genuine belt no.: 13028-20P25
-
-
- Genuine HKS
- Core size: 200 x 220 x 48.5/15
- Core mounting position: Inside left fender
-
-
-
-
-
-
- Genuine HKS
- AN001 is compatible with:
- Nissan (CA18, CG10, CG13, CGA3, CR10, CR12, CR14, GA15, GA16, HR12, HR15, HR16, KA24, MA10, MR16, MR18, MR20, QG15, QG18, QR20, QR25, RB20, RB25, RB26, SR18, SR20, VG20, VG30, VH41, VH45, VK45, VQ25, VQ30, VQ35, VQ37, VR38)
- Honda (B16, B18, B20, D13, D15, D16, E07, F18, F20, F22, F23, H22, J30, K20, K24, L13, L15, LDA, LEA, LEB, P07, R18, R20, S07, ZC)
- Suzuki (K6, K12, M15, M16)
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Material: Polyester
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- PRE-ORDER - order period ends 31.st of october
- Delivery will start from around April 2024
- Genuine HKS
- 50th Limited Edition
- Set contains front right and left floor mat
- For right-hand drive cars
- *The shape in the image is an example and is not for the corresponding car model.
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
-
- Genuine Garage Mak
- Fiberglass (FRP)
- Width: 1016 mm
-
- Genuine Kagotani Garage
- Material: Fiberglass
- Set of left and right fender
- NOTE! Carbon louvers is not inculded, these has to be ordered seperately.
-
- Genuine Garage Kagotani
- Material: Carbon
- Set of left and right louver
- For GK front fenders
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
Page load link
