- Genuine Origin Labo.
- Avaliable in Carbon fibre (CF) and Fibreglass (FRP)
-
-
- Genuine Varis
- Made in Japan
- Lead time: About 6 month from ordering
- Material: CFRP
- Standard factory bonnet weight: 12.6kg
- Varis carbon bonnet weight: 9.7kg
-
- Genuine Okuyama Carbing
- Material: Carbon fiber
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine TAKERO’S
- Material: Carbon fiber (CF)
- Fits typeZERO front bumper spoiler lip
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine TAKERO’S
- Material: Carbon fiber (CF)
- Only wing flap, wing is NOT included
- Can be installed on OEM 260RS rear wing
-
- Genuine BRIDE
- Colour: Gradiation version
- Shell Materials: Super Aramid (carbon)
- System: LOWMAX
- This WIDE model is 30mm wider than standard model
- Weight: 8kg
- Cover material: Flame retardant fabric
- FIA Approved: YES
-
- Ganuine JULIUS
- Material: Carbon / Matt finish
- Installation tape included
-
- Genuine VOLTEX
- Type: Street Version
- Material: - Upper part: Fiberglass (FRP) - Lower part: Wet carbon + FRP
-
- Genuine VOLTEX
- Type: Street Version
- Material: Wet Carbon
- Set contains left and right side skirt
-
- Genuine VOLTEX
- Material: Carbon
- Lead time: Made on order (5~6 month)
- Ultra light weight
- Highly vented design
-
- Genuine Top Secret
- Materials: Carbon
- Replaces the OE front diffuser/undercover
- Slightly bigger shape than OE, delivers bigger downforce
-
- Genuine HKS Kansai Service
- Material: Carbon
- Contains: Left and right side - Side steps - Rear under spoilers
- Under spoilers fits factory rear bumper
-
Out of stock
- Genuine Spirit Rei
- Material: Carbon
-
- Genuine Garage Kagotani
- Material: Carbon
- Set of left and right louver
- For GK front fenders
-
- Genuine Shift Sports
- Material: Carbon fiber
- Finish: Clear coated
- Weight: 7.5~8.0kg
- Leadtime: 3~4 weeks
-
- Genuine VOLTEX
- Material: Wet Carbon
- Width: 1500mm
- Fits: CT9A VII, VIII, IX (7, 8, 9)
-
- Genuine ARTISAN SPIRITS
- Material: CFRP (Carbon Fiber Reinforcement Plastic)
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine Garage Defend
- Material: CF Carbon Fiber
- Bolt on design and vehicle specific
- Increasing cooling efficincy by forcing airflot in to the radiator
-
- Genuine TRA Kyoto
- Type: Pandem
- Material: Fiberglass (+ Carbon Option)
- Includes: - Front bumper beam (Carbon Option) - Lower front spoiler - Front over-fenders +60mm - Rear over-fenders +100mm - Rear duck tail wing
-
- Genuine Craft Square
- Material: Aluminium/Carbon
- Blue lens is avaliable as optional
- Weight: 430g pr. mirror
- Lead time: ~7-8 month from ordering
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3601A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: RF-3301A
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BNR34 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine AutoSelect
- Material: Carbon fiber
- Designet to fit BCNR33 normal bumper
- Minor machining required to suit other bumpers
- Made in Japan
-
- Genuine D-Max
- Material: Carbonfiber (CFRP)
- Type: D1Spec
-
- Genuine: Top Secret
- Material: CFRP (Carbon)
- Type: G-Force
-
- ETA: Unknown (2023-6/9)
- Genuine HKS Kansai Service
- Material: Carbon fiber
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: GMR-3301
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine GruppeM
- Material: Carbon Fiber
- Replacement filter: GMR-3301
- Made in Japan
- Handcrafted to perfection
- Relentless R&D
- Performance without compromise
- Elegant & refined
-
- Genuine Top Secret
- Set of left and right
- Material: CFRP (Carbon)
-
- Genuine Top Secret
- Set of left and right
- Material: CFRP (Carbon)
- Set contains side and center generator
-
- Genuine SPEED FORME
- Made in Japan
- Type-II
- Material: Carbon fibre
-
- Genuine Origin Labo
- Material: Carbon fiber
- Type: Ver.2
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
- Kit contains: - FRP Front bumper w/Carbon spoiler lip (2 pcs.) - FRP Sideskirts w/Carbon under panel (4 pcs.) - FRP Rear bumper and rear side addons w/Carbon under panel (4 pcs.)
-
- Genuine Varis
- Solid Joker
- Made in Japan
- Lead time: About 6 month from ordering
-
- Genuine BRIDE
- Colour: Gradiation version
- Shell Materials: Carbon
- System: LOWMAX
- 30mm wider than the standard model
- 10mm wider at the shoulder part than the standard model
- Weight: 8kg
- Cover material: Flame retardant fabric
- FIA Approved: YES
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version I
-
- Genuine Kondo Engineering Takumi Project
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
- Version II
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP/FRP)
- Front Carbon, Back Glassfibre
- Version II
-
- Genuine Kondo Engineering Takumi Project
- The backbone is made of lightweight and strong hard carbon. Areas where stress is concentrated are reinforced with honeycomb.
- Waterproof design prevents rainwater from entering without a duct cover
- Material Hard Carbon (H-CFRP)
- Carbon Front and Back
-
- Genuine Kondo Engineering Takumi Project
- Waterproof design prevents rainwater from entering without a duct cover
- Material Carbon and Fiberglass (CFRP-FRP)
- Carbon Front and Fiberglass Back
-
- Genuine Kondo Engineering Takumi Project
- Material Carbon
- Fits the Takumi Project Aero Bonnet and Genuine OEM Bonnets
- Smoother opening and closing of the bonnet and improves workability
-
- Genuine HKS
- Complete Kit (4 pcs.) - Front bumper spoiler (GFRP+CFRP) - Side skirts (ABS+CFRP) - Rear bumper spoiler (CFRP) - Duck tail spoiler (CFRP)
- All parts in this kit is avaliable for seperate purchase
-
・Super lightweight model weighing approximately 2.72kg (compared to the stock weight of approximately 8.1kg) ・UV-cut clear gel coat finish -
In terms of size, compared to the genuine Subaru product (STI under spoiler with skirt lip), the overall height is approximately 10mm higher, the width of the front center recess is approximately 20mm higher, and the maximum protruding part is approximately 15mm longer. It is about one size larger. The weight that sports enthusiasts will be concerned about is 2.25 kg for the carbon (CFRP) type, which is a minimal increase in weight. -
In terms of size, compared to the genuine Subaru product (STI under spoiler with skirt lip), the overall height is approximately 10mm higher, the width of the front center recess is approximately 20mm higher, and the maximum protruding part is approximately 15mm longer. It is about one size larger. -
A well-calculated, highly functional and stylish design. It is a part that adds a sense of speed to the face and has a great dress-up effect. The perfect fit to the complex shaped bumper is a quality that only Takumi Project can provide. We have also released a carbon canard for the upper section, which can be updated to a twin canard. *Not compatible with vehicles equipped with the S208 under spoiler. *Cannot be installed on under spoilers for the S207 and VAG tS. *Installation parts (screws, bolts, nuts, etc.) are not included. *Installation requires skill. We recommend asking a specialist shop for installation. -
A well-calculated, highly functional and stylish design. It is a part that adds a sense of speed to the face and has a great dress-up effect. The perfect fit to the complex shaped bumper is a quality that only Takumi Project can provide. We have also released a carbon canard for the upper section, which can be updated to a twin canard. *Not compatible with vehicles equipped with the S208 under spoiler. *Cannot be installed on under spoilers for the S207 and VAG tS. *Installation parts (screws, bolts, nuts, etc.) are not included. *Installation requires skill. We recommend asking a specialist shop for installation.
-
A well-calculated, highly functional and stylish design. It is a part that adds a sense of speed to the face and has a great dress-up effect. The perfect fit to the complex shaped bumper is a quality that only Takumi Project can provide. We have also released a carbon canard for the upper section, which can be updated to a twin canard. *Not compatible with vehicles equipped with the S208 under spoiler. *Cannot be installed on under spoilers for the S207 and VAG tS. *Installation parts (screws, bolts, nuts, etc.) are not included. *Installation requires skill. We recommend asking a specialist shop for installation.
