- Genuine Nissan
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine KOYORAD
- Type: Type-R
- Material: Copper
- 3-Layer
- Color: Black
- Radiator cap is not included, and should be ordered seperately
- For this radiator use: SKC13
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed. - Repair parts for old and new type is avaliable.
-
- Genuine TOMEI
- SUS316 Full Cast
- Exit diameter: ~66mm
- Volume: 800cc / 900cc
- Pipe thickness: ~2.8mm
- Flange thickness: ~11mm
- Weight: 1.85kg / 2.10kg
-
- Genuine IKEYA Formula
- Adjustment range: +/- 10mm
- Includes left and right arm
- Repair ball joint: From October 2020, the use of the ball joint of the Toyota upper arm has been changed. - Repair parts for old and new type is avaliable.
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: – OEM: 87 – NÜR SPEC-R: 94
-
- Genuine HPI
- Aluminium intercooler kit
- Silicone coupler color: Black
- Spec.R type
- Spring clamps included
- Bumper and reinforcement may require modification
-
- Genuine BLITZ
- Material: Stainless Steel
- Pipe size: 80mm
- Tip diameter: 114.3mm
- Pieces: 2
- dB level: - OEM: 86 - NÜR SPEC-R: 99
-
- Genuine KOYORAD
- Type: Type R
- Material: Copper
- Core layer: 3
-
- Genuine ORC
- System: Push type
- With spring dampers
- Discs: Single
- Disc Outer Diameter: 200mm
- Torque response Nm (kgfm): 340(35)
- Kit includes: - Clutch cover - Clutch disc - Flywheel - Flywheels bolts - Release bearing - Pilot bearing
-
- Genuine Fujitsubo
- Model: Legalis R
- JAN Code: 4944997715836
- Outlet shape: 117mm round lash II
- Pipe diameter: 76.3mm
- Muffler weight: 13.8kg (STD: 17.8kg)
- Idling volume: 66dB (STD: 62dB)
- Proximately Exhaust volume at 4,800rpm: 90dB (STD: 88dB)
- Burned gradiation tailtip is avaliable
-
Out of stock
- Genuine Apexi
- Set indluding hand controller (FC Commander)
- Automatic transmission
-
- Genuine Nismo
- Includes: Cover for front and rear seat
- PVC Leather / Ultra-suede
- Repair/replacement covers are avaliable.
-
Out of stockLIMITED! ONLY AS LONG AS WE HAVE STOCK! Nismo combination meter is a one-piece housing assembly, that can be quicly installed. Simply remove the OEM meter and pud in this new high scale meter.
- Genuine Nismo
- OEM Plug'n'Play
- High scale speedo
- Speedo meter scale: 280km/t
- Tacho meter scale: 10,000rpm
- Kms adjustment service is avaliable for 20,000yen extra, please enter the mileage you want it adjusted to in the order comment field.
-
- Genuine Okada Projects
- Type: Plasma Direct (D)
- Contains 6 ignition coilpaks
- Plug'n'Play installation
- For normal boost (under 1.8kg/cm2)
-
LIMITED! ONLY AS LONG AS WE HAVE STOCK! Nismo combination meter is a one-piece housing assembly, that can be quicly installed. Simply remove the OEM meter and pud in this new high scale meter.
- Genuine Nismo
- OEM Plug'n'Play
- High scale speedo
- Speedo meter scale: 300km/t
- Tacho meter scale: 10,000rpm
- Kms adjustment service is avaliable for 20,000yen extra, please enter the mileage you want it adjusted to in the order comment field.
-
- Genuine BLITZ
- New standards of intercooler kit, “SE (Standard Edition)” appeared.
- The performance and cost performance while the balance at a high level, realizing a low price.
- Adopt a full polish processing in aluminum pipe section. (Except for some models and parts)
- The joint hoses, employing heat-resistant, blue silicone excellent in durability.
- Piping is less layouts utmost bending, by employing aluminum as the material, realizing a reduction in weight and pressure loss.
- Complete kit comes with all hardware required for installation.
- Core size: 284 x 490 x 102mm
- Core type: Tube type
- Fin shape: Offset inner fin
- Core coating: None
- Pipe preocessing: Polished
- Side tank processing: Polished
- Hose band: Stainless steel
- Couplers: Silicone 3-ply
-
- Genuine TAKERO’S
- Material: Fiberglass (FRP) and Carbon fiber (CF)
- typeZERO
- Bumper has integrated carbon diffuser
- Foglight and base is not included, can be purchased seperately
-
- Genuine TOMEI
- Material: Titanium (Stainless steel)
- Main pipe dia: Φ70×2-Φ80 (Φ60×2-Φ70)
- Pipe thickness: 1 mm (2 mm
- Flange thickness: 8 mm (8 mm)
- Weight: 2.4 kg (5.6 kg) (Weight reduce 3.2 kg)
- (STANDARD PART)
-
- Genuine VOLTEX
- Type: Street Version
- Material: Wet Carbon
- Set contains left and right side skirt
-
- Genuine HKS
- Clutch type: Single disk
- Method: Push
- Flywheel weight: 7.2kg (stock flywheel 12.3kg)
- Clutch capacity: 800Nm (178% compared to stock)
- Treading force: 221N (170% compared to stock)
- Bolt On Design (all hardware required is included)
- Repair parts avaliable